Digital Monitoring Products XR150/XR550 Series Panels Operating instructions

Brand
Digital Monitoring Products
Model
XR150/XR550 Series Panels
Category
Fire protection
Type
Operating instructions
Designed, engineered, and
manufactured in Springfield, MO
using U.S. and global components.
LT-1290 20051
INTRUSION • FIRE • ACCESS • NETWORKS
2500 North Partnership Boulevard
Springfield, Missouri 65803-8877
800.641.4282 | DMP.com
XR150/XR550 SERIES PANELS
Operating Instructions
NORMAL STANDBY CONDITION
When the system is in the normal standby condition, the keypad shows
either the time of day or a blank display.
ALARM CONDITION
When the system is in an alarm condition, the keypad displays in red and
shows the violated zone name(s) followed by an alarm display.
ALARM SILENCE
To silence the alarm while the bell or siren is sounding, enter your code
number and press the CMD key. This silences the alarm but does not cancel
any alarm reports to the central station.
RESETTING DETECTORS
To reset a smoke or other detector, enter the User Menu by pressing the
CMD key until MENU? NO YES appears in the display. Press the top
row key under YES. The display shows ENTER CODE: -. Enter your code
number and press CMD. The keypad display now shows ALARM SILENCE?
if your code allows. Press the CMD key until SENSOR RESET? appears in
the display. Press any top row key.
TROUBLE CONDITION
When a device is in a trouble condition, the keypad tones and displays the
zone or device name followed by TRBL. Press any top row key to silence.
SYSTEM TESTING
You should test the security system weekly to ensure proper operation. If
your user code allows, you can do this through a function in the User Menu.
After entering the User Menu, press the CMD key until SYSTEM TEST?
displays. Press the left most top row Select key. The system bell, battery,
and communication to the central station receiver system is then tested.
ALARM SERVICE
If service is required for this system, please contact:
Company ______________________________________
Address _______________________________________
Telephone _____________________________________
The operating instructions above should be attached to the front, or framed, and located
adjacent to the panel or a keypad with an alphanumeric display.
© 2020 Digital Monitoring Products, Inc.
  • Page 1 1

Digital Monitoring Products XR150/XR550 Series Panels Operating instructions

Brand
Digital Monitoring Products
Model
XR150/XR550 Series Panels
Category
Fire protection
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents