Husky Liners 14031 Installation guide

Type
Installation guide

This manual is also suitable for

View the Husky Liner Lifetime Warranty at www.huskyliners.com/lifetime-warranty 1302 Installation Instruction WL.doc
04_12_2018
CARE AND USE INSTRUCTIONS
Thank you for selecting a WeatherBeater™ Floor Liner from Winfield Consumer Products. Your new front
floor liners are custom molded to fit your Jeep Wrangler. The liner are made to take the place of your factory
floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new floor
liners. However, do not remove the factory-installed carpeting.
Your liners are molded using an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work
well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liners slick.
FRONT FLOOR LINER INSTALLATION INSTRUCTIONS FOR
JEEP WRANGLER (JL-SERIES)
PRIOR TO INSTALLING YOUR LINERS, SLIDE BOTH FRONT ROW SEATS COMPLETELY BACK AS THIS
WILL ALLOW EASIER ACCESS TO THE FLOOR. WITH THIS DONE, INSTALL THE LINERS, POSITIONING
THEM AS SHOWN ABOVE. TAKE CARE THAT THE LINERS ARE SNAPPED ONTO THE FACTORY FLOOR
MAT RETAINING POSTS. WITH THE LINERS INSTALLED, REPOSITION THE FRONT SEATS AS DESIRED.
DRIVERS SIDE LINER
PASSENGERS SIDE LINER
  • Page 1 1

Husky Liners 14031 Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI