SMART Technologies Board 6000 and 6000 Pro Installation guide

Was this document helpful?

smarttech.com/docfeedback/171167

SMARTBoard® 6000 and

6000Proseries

interactive displays

INSTALLATION AND MAINTENANCE GUIDE

SPNL-6365-V3/SBID-6365 |SPNL-6375-V3 |SPNL-6265-V3/SBID-6265 |SPNL-6275-V3

SPNL-6065-V3/SBID-6065 |SPNL-6075-V3 |SPNL-6365-V2 |SPNL-6375

smarttech.com/kb/171167

Learn more

This guide and other resources for SMARTBoard 6000 and 6000 Pro series

interactive displays are available in the Support section of the

SMARTwebsite (smarttech.com/support). Scan this QRcode to view these

resources on your mobile device.

この装置は、クラスA情報技術装置です。この装置を家庭環境で使用すると電波妨害を引き起こすことがあります。この場合には使用者が適切な対策を講ずるよう要

求されることがあります。

VCCI-A

Licenses

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United

States and other countries.

The Bluetooth word mark is owned by the Bluetooth SIG, Inc. and any use of such marks by SMARTTechnologiesULC is under license.

Trademark notice

SMARTBoard, SMARTNotebook, SMARTInk, SMARTkapp, SMARTkappiQ, DViT, PenID, smarttech, the SMART logo and all SMART taglines are trademarks or

registered trademarks of SMARTTechnologiesULC in the U.S. and/or other countries. Windows is either a registered trademark or trademark of Microsoft

Corporation in the United States and/or other countries. Apple, Mac, macOS, OSX, iPhone, iPad, iPod touch, iTunes, AirPlay and Bonjour are trademarks of Apple

Inc., registered in the U.S. and other countries. Google, Google Cast, Google Play, Android, Chrome, Chromebook and Chromecast are trademarks of Google

Inc. AirParrot is a trademark of Squirrels LLC registered in the United States and other countries. All other third-party product and company names may be

trademarks of their respective owners.

Copyright notice

or translated into any language in any form by any means without the prior written consent of SMARTTechnologiesULC. Information in this manual is subject to

change without notice and does not represent a commitment on the part of SMART.

This product and/or use thereof is covered by one or more of the following U.S. patents:

www.smarttech.com/patents

September 17, 2019

i smarttech.com/kb/171167

Important information

WARNING

lFailure to follow the installation instructions included with the display could result in injury

and product damage which may not be covered by the warranty.

lDo not open or disassemble the display. You risk electrical shock from the high voltage

inside the casing. Opening the casing also voids the warranty.

lDo not stand (or allow children to stand) on a chair to touch the surface of the display. Rather,

mount the product at the appropriate height.

lTo reduce the risk of fire or electric shock, do not expose the display to rain or moisture.

lIf the display requires replacement parts, make sure the service technician uses

replacement parts specified by SMARTTechnologies or parts with the same characteristics

as the original.

lEnsure that any cables that cross the floor to the display are properly bundled and marked

to avoid a trip hazard.

lDo not insert objects inside the cabinet ventilation holes, because they could touch

dangerous voltage points and cause electric shock, fire or product damage which may not

be covered by the warranty.

lDo not place heavy objects on the power cable. Damage to the cable could cause shock,

fire or product damage which may not be covered by the warranty.

lUseonly extension cords and outlets that can fully accommodate the display’s polarized

plug.

lUse the power cable provided with the display. If a power cable is not supplied, contact

your supplier. Use only power cables that match the AC voltage of the power outlet and that

comply with your country’s safety standards.

lIf the glass is broken, do not touch the liquid crystal. To prevent injury, handle glass

fragments with care when disposing of them.

lDo not move or mount the display by connecting rope or wire to its handles. The display is

heavy, and failure of the rope, wire or handle could lead to injury.

lUse only VESA®-approved mounts.

IMPORTANT INFORMATION

ii smarttech.com/kb/171167

lDisconnect all of the display’s power cables from the wall outlet and seek assistance from

qualified service personnel if any of the following occur:

oThe power cable or plug is damaged

oLiquid is spilled into the display

oObjects fall into the display

oThe display is dropped

oStructural damage, such as cracking, occurs

oThe display behaves unexpectedly when you follow operating instructions

CAUTION

lBefore you clean the display’s screen, shut down or disconnect the computer. Otherwise,

you may scramble the desktop icons or inadvertently activate applications when you wipe

the screen.

lAvoid setting up and using the display in an area with excessive levels of dust, humidity, and

smoke.

lDust buildup on the camera windows and reflective tape will degrade touch performance.

SMART recommends that you inspect the camera windows and reflective tape for buildup

and clean weekly.

lMake sure an electrical socket is near the display and remains easily accessible during use.

lThe display should be used only with European TN and TT power distribution systems.

It is not suitable for older, IT-type power distribution systems found in some European

countries. “This system (IT-type) is widely used isolated from earth, in some installations in

France, with impedance to earth, at 230/400V, and in Norway, with voltage limiter, neutral

not distributed, at 230V line-to-line.” (IEC 60950:1999)

Contact qualified personnel if you’re uncertain of the type of power system available where

you’re installing the display.

lThe accessory slot’s maximum available power is 60 W. The slot is not a limited power

source. To reduce the risk of fire, make sure that accessories connecting to the slot satisfy

the fire enclosure requirements of IEC60950-1.

lYou must connect the USB cable that came with the display to a computer that has a USB

compliant interface and that bears the USB logo. In addition, the USB source computer must

be compliant with CSA/UL/EN 60950 and bear the CE mark and CSA and/or UL Mark(s) for

CSA/UL 60950. This is for operating safety and to avoid damage to the display.

IMPORTANT INFORMATION

iii smarttech.com/kb/171167

IMPORTANT

lThe following are the normal operating power requirements for the display:

Model Power requirements

SPNL-6000-V3/SBID-6000 models

SPNL-6365-V3/SBID-6365 100V to 240V AC, 50 Hz to 60 Hz, 92 W

SPNL-6375-V3 100V to 240V AC, 50 Hz to 60 Hz, xxx W

SPNL-6265-V3/SBID-6265 100V to 240V AC, 50 Hz to 60 Hz, 92 W

SPNL-6275-V3 100V to 240V AC, 50 Hz to 60 Hz, xxx W

SPNL-6065-V3/SBID-6065 100V to 240V AC, 50 Hz to 60 Hz, 83 W

SPNL-6075-V3 100V to 240V AC, 50 Hz to 60 Hz, xxx W

SPNL-6000-V2 models

SPNL-6365-V2 100V to 240V AC, 50 Hz to 60 Hz, 113 W

SPNL-6375 100V to 240V AC, 50 Hz to 60 Hz, 190 W

SPNL-6265-V2 100V to 240V AC, 50 Hz to 60 Hz, 113 W

SPNL-6275 100V to 240V AC, 50 Hz to 60 Hz, 190 W

SPNL-6065-V2 100V to 240V AC, 50 Hz to 60 Hz, 110 W

SPNL-6075 100V to 240V AC, 50 Hz to 60 Hz, <131 W

SPNL-6000-V1 models

SPNL-6055 90V to 240V AC, 50 Hz to 60 Hz, 130 W

SPNL-6065 100V to 240V AC, 50 Hz to 60 Hz, 200 W

SPNL-6000P models

SPNL-6365P 100V to 240V AC, 50 Hz to 60 Hz, 113 W

SPNL-6375P 100V to 240V AC, 50 Hz to 60 Hz, 190 W

SPNL-6265P 100V to 240V AC, 50 Hz to 60 Hz, 113 W

SPNL-6275P 100V to 240V AC, 50 Hz to 60 Hz, 190 W

SPNL-6065P 100V to 240V AC, 50 Hz to 60 Hz, 110 W

SPNL-6075P 100V to 240V AC, 50 Hz to 60 Hz, <131 W

IMPORTANT INFORMATION

iv smarttech.com/kb/171167

lFor additional requirements and other information, refer to the display’s specifications (see

More information on page13).

Federal Communication Commission

interference statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the

following measures:

lReorient or relocate the receiving antenna.

lIncrease the separation between the equipment and receiver.

lConnect the equipment into an outlet on a circuit different from that to which the receiver is connected.

lConsult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

5.15–5.25 GHz frequency band operation is restricted to indoor use only. Outdoor operations in the 5150~5250 MHz are

prohibited.

Radiation exposure statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should

be installed and operated with minimum distance 20 cm between the radiator and your body.

Note: The country code selection is for the non-U.S. model only and is not available to all U.S. models. Per FCC regulations, all

Wi-Fi products marketed in U.S. must be fixed to U.S. operation channels only.

Industry Canada statement

This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including interference

that may cause undesired operation.

Ce dispositif est conforme à la norme CNR-210 d’Industrie Canada applicable aux appareils radio exempts de licence. Son

fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce

dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.

Caution

(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to

co-channel mobile satellite systems;

IMPORTANT INFORMATION

v smarttech.com/kb/171167

(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the

e.i.r.p. limit; and

(iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for

point-to-point and non point-to-point operation as appropriate.

(iv) Users should also be advised that high-power radars are allocated as primary users (i.e., priority users) of the bands 5250-

5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

Avertissement

Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des instructions précises sur les restrictions

susmentionnées, notamment :

(i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de

réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;

(ii) le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5 250-5 350 MHz et 5 470-5 725 MHz doit se

conformer à la limite de p.i.r.e.;

(iii) le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5 725-5 825 MHz) doit se conformer à la limite de

p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le cas.

(iv) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés

utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars

pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.

Radiation exposure statement

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be

installed and operated with minimum distance 20 cm between the radiator and your body.

Déclaration d’exposition aux radiations

Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet

équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

EU declaration of conformity

Hereby, SMART Technologies ULC declares that the radio equipment type OPS, AM40 is in compliance with Directive

2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address: smarttech.com/compliance

The frequency band and the maximum transmitted power in EU are listed below:

Transmitting Band (MHz) Maximum Transmit Power EIRP (dBm)

2400–2483.5 19

5150–5350 16

5470–5725 16

Restrictions in

AT/BE/BG/CZ/DK/EE/FR/DE/IS/IE/IT/EL/ES/CY/LV/LI/LT/LU/HU/MT/NL/NO/PL/PT/RO/SI/SK/TR/FI/SE/CH/UK/HR. 5150MHz-

5350MHz is for indoor use only.

IMPORTANT INFORMATION

vi smarttech.com/kb/171167

CAUTION: EXPOSURE TO RADIO FREQUENCY RADIATION

This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment. This equipment should

be installed and operated with minimum distance 20 cm between the radiator and your body.

Microsoft® statement regarding Windows® 10

operating system

Windows 10 is automatically updated, which is always enabled. ISP fees may apply. Additional

requirements may apply over time for updates.

vii smarttech.com/kb/171167

Contents

Important information i

Federal Communication Commission interference statement iv

Industry Canada statement iv

EU declaration of conformity v

Microsoft statement regarding Windows 10 operating system vi

Chapter 1: Welcome 1

About this guide 1

Identifying your specific model 2

Features 4

Components 5

Accessories 11

More information 13

Chapter 2: Installing the display 17

Moving the display to the installation site 17

Installing the display on a wall 20

Installing the display on a stand 26

Chapter 3: Connecting power and devices 27

Connecting power 27

Connecting to a network 28

Connecting the Intel Compute Card 28

Connecting cables for room computers, guestlaptops and other input sources 29

Connecting external speakers 30

Connecting room control systems 31

Connectorpanel reference 31

iQ appliance reference 33

Chapter 4: Turning on the display for the first time 35

Chapter 5: Orienting and calibrating the display 37

Orienting the display 37

Calibrating the display 38

Chapter 6: Maintaining the display 41

Checking the display installation 41

Cleaning the screen 42

Cleaning the camera windows and reflective tape 42

Cleaning the presence detection sensor 43

CONTENTS

viii smarttech.com/kb/171167

Maintaining ventilation 43

Preventing condensation 44

Replacing the pens 44

Turning the display off and back on 44

Resetting the display 45

Removing and transporting the display 45

Updating firmware and software 46

Chapter 7: Troubleshooting 49

Using the indicator light to resolve common issues 50

Resolving issues with power 50

Resolving issues with presence detection and Wake to Touch 51

Resolving issues with the front control panel 51

Resolving issues with video 52

Resolving issues with image quality 53

Resolving issues with audio 54

Resolving issues with touch and digital ink 55

Resolving issues with the iQ experience 56

Resolving issues with the Intel Compute Card 56

Resolving issues with software 56

Referring to the SMART knowledge base for additional troubleshooting information 56

Contacting your reseller for additional support 56

Appendix A: Adjusting iQ settings 59

Network settings 59

Personalization 60

Application settings 60

System settings 62

Appendix B: Using the SPNL-6000-V3/SBID-6000 on-screen display menu 67

Changing settings in the on-screen display menu 67

Picture menu options 68

Sound menu options 69

OSD menu options 69

Setup menu options 69

About menu options 70

Appendix C: Using the SPNL-6000-V2, SPNL-6000-V1 and SPNL-6000P on-screen display

menu 71

Changing settings in the on-screen display menu 72

SPNL-6000-V2 and SPNL-6000P menu options 73

SPNL-6000-V1 menu options 76

Appendix D: Remotely managing the display 81

Configuring the computer’s serial interface settings 82

CONTENTS

ix smarttech.com/kb/171167

Power modes 83

Commands and responses 83

SPNL-6000-V3/SBID-6000 commandinventory 85

SPNL-6000-V2 and SPNL-6000P commandinventory 91

SPNL-6000-V1 commandinventory 98

Resolving issues with remote management 103

Appendix E: Hardware environmental compliance 105

Waste Electrical and Electronic Equipment (WEEE) 105

More information 105

Chapter 1

1 smarttech.com/kb/171167

Chapter 1: Welcome

About this guide 1

Identifying your specific model 2

Identifying your SMARTBoard 6000 or 6000 Pro series interactive display model 2

Identifying your iQ appliance model 3

Features 4

Components 5

iQ appliance (and Intel Compute Card) 6

Screen 7

Pens with erasers 8

Front control panel 9

Presence detection sensor 11

Internal speakers 11

Accessories 11

SMART wall mount and wall stand 12

SMART Mobile Stand 12

SBA-100 projection audio system 12

SMART Audio 400 classroom amplification system 13

USB extenders 13

More information 13

This chapter introduces the SMARTBoard® 6000 or 6000 Pro series interactive display.

About this guide

This guide explains how to install and maintain a SMARTBoard 6000 or 6000 Pro series interactive

display. It includes the following information:

lHow to install the display

lHow to connect power and devices

lHow to turn on the display for the first time and configure the iQ appliance

lHow to maintain the display for years of use

lHow to troubleshoot issues with the display

CHAPTER 1

WELCOME

2 smarttech.com/kb/171167

In addition, this guide includes information on the display’s settings, on-screen display menu and

remote management support.

This guide is intended for those who install and maintain displays in their organizations. Other

documentation and resources are available for those who use displays (see More information on

page13).

Identifying your specific model

SMART offers several different models of the SMARTBoard 6000 and 6000 Pro series interactive

display and iQ appliance.

Identifying your SMARTBoard 6000 or 6000 Pro series interactive

display model

The following models of SMARTBoard 6000 and 6000 Pro series interactive display are available:

Model Frame style Screen size

(approximate)

iQ

SPNL-6000-V3/SBID-6000 models

SPNL-6365-V3/SBID-6365 White 65" (165 cm) Yes

SPNL-6375-V2 White 75" (190 cm) Yes

SPNL-6265-V3/SBID-6265 White 65" (165 cm) Yes

SPNL-6275-V3 White 75" (190 cm) Yes

SPNL-6065-V3/SBID-6065 White 65" (165 cm) No

SPNL-6075-V3 White 75" (190 cm) No

SPNL-6000-V2 models

SPNL-6365-V2 White 65" (165 cm) Yes

SPNL-6375 White 75" (190 cm) Yes

SPNL-6265-V2 White 65" (165 cm) Yes

SPNL-6275 White 75" (190 cm) Yes

SPNL-6065-V2 White 65" (165 cm) No

SPNL-6075 White 75" (190 cm) No

SPNL-6000-V1 models

SPNL-6055 White 55" (140 cm) No

CHAPTER 1

WELCOME

3 smarttech.com/kb/171167

Model Frame style Screen size

(approximate)

iQ

SPNL-6065 White 65" (165 cm) No

SPNL-6000P models

SPNL-6365P Brushed metal 65" (165 cm) Yes

SPNL-6375P Brushed metal 75" (190 cm) Yes

SPNL-6265P Brushed metal 65" (165 cm) Yes

SPNL-6275P Brushed metal 75" (190 cm) Yes

SPNL-6065P Brushed metal 65" (165 cm) No

SPNL-6075P Brushed metal 75" (190 cm) No

Refer to the specifications for detailed technical information for each of these models, including

product dimensions and weights (see More information on page13).

NOTES

lThe SPNL-6000-V1 models have been discontinued.

lThe easiest way to differentiate SPNL-6000-V3/SBID-6000 models from other models is the

front control panels. On SPNL-6000-V3/SBID-6000 models, the front control panels have

three additional buttons:

Identifying your iQ appliance model

The iQ appliance is installed in the accessory slot of some interactive display models to enable iQ

functionality in those models. SMARToffers several different iQ appliance models.

Use the Identifying your iQ appliance model wizard to identify the specific model of iQ appliance

installed in your display.

CHAPTER 1

WELCOME

4 smarttech.com/kb/171167

Features

The SMARTBoard 6000 or 6000 Pro series interactive display is the hub of your classroom or

meeting room. PC-free embedded computing provides one-touch access to collaborative tools,

including a whiteboard, wireless screen sharing and a web browser. There’s no need for wires,

cables or manual software and firmware updates.

The display includes the following features:

Feature Description

iQ experience The display’s iQ appliance provides one-touch access to

collaborative tools, including a whiteboard, wireless screen sharing

and a web browser.

The SPNL-6365-V3/SBID-6365, SPNL-6375-V3, SPNL-6365-V2,

SPNL-6375, SPNL-6365P and SPNL-6375P models have an Intel

Compute Card in the appliance to provide a fully functional

Windows 10 solution at your fingertips, without the need for an

external PC or cabling.

Touch support You can do everything on the display that you can do at your

computer—open and close applications, meet with others, create

new documents or edit existing ones, visit websites, play and

manipulate videos, and so on—by touching the display’s surface.

You can use an array of gestures within applications, including

panning, scaling, rotating and zooming in and out.

The display’s support for at least four simultaneous touches

enables you and other users to interact with objects on the screen

at the same time.

Writing and drawing

support

You can write over applications in digital ink using one of the

supplied pens, and then erase the digital ink using your palm or the

eraser on the pen.

You and another writer can write or draw digital ink on the screen at

the same time. The PenID™ feature enables you to assign different

ink appearances to each pen.

Audio support The display includes integrated speakers for presenting audio from

connected input sources.

CHAPTER 1

WELCOME

5 smarttech.com/kb/171167

Components

The display consists of the following components:

No. Name More information

Pictured

1 Screen Page7

2 Pen with eraser (×2) Page8

3 Front control panel Page9

4 Presence detection sensor Page11

5 Connector panel Page27

6 iQ appliance (and Intel Compute Card) Page6

7 USB receptacle Page46

Not pictured

8 Menu control panel1Page71

9 Speakers Page11

1SPNL-6000-V2, SPNL-6000-V1 and SPNL-6000P models only

CHAPTER 1

WELCOME

6 smarttech.com/kb/171167

iQ appliance (and Intel Compute Card)

The iQ appliance is installed in the accessory slot on the back of the following models:

lSPNL-6365-V3/SBID-6365

lSPNL-6375-V3

lSPNL-6265-V3/SBID-6265

lSPNL-6275-V3

lSPNL-6365-V2

lSPNL-6375

lSPNL-6265-V2

lSPNL-6275

lSPNL-6365P

lSPNL-6375P

lSPNL-6265P

lSPNL-6275P

Take advantage of iQ technology and access collaborative tools.

The SPNL-6365-V3/SBID-6365, SPNL-6375-V3, SPNL-6365-V2, SPNL-6375, SPNL-6365P and

SPNL-6375P models have an Intel Compute Card in the appliance to provide a fully functional

Windows 10 solution at your fingertips, without the need for an external PC or cabling.

CAUTION

The accessory slot’s maximum available power is 60 W. The slot is not a limited power source.

To reduce the risk of fire, make sure that accessories connecting to the slot satisfy the fire

enclosure requirements of IEC60950-1.

TIP

Use the Identifying your iQ appliance model wizard on the SMART support site to identify your

model of iQ appliance.

CHAPTER 1

WELCOME

7 smarttech.com/kb/171167

Screen

The screen sizes vary by model:

Model Diagonal Width Height

SPNL-6000-V3/SBID-6000 models

SPNL-6365-V3/

SBID-6365

64 1/2" (163.9 cm) 56 1/4" (142.8 cm) 31 5/8" (80.4 cm)

SPNL-6375-V3 75" (190.5 cm) 65" (165.2 cm) 38 5/8" (93 cm)

SPNL-6265-V3/

SBID-6265

64 1/2" (163.9 cm) 56 1/4" (142.8 cm) 31 5/8" (80.4 cm)

SPNL-6275-V3 75" (190.5 cm) 65" (165.2 cm) 38 5/8" (93 cm)

SPNL-6065-V3/

SBID-6065

64 1/2" (163.9 cm) 56 1/4" (142.8 cm) 31 5/8" (80.4 cm)

SPNL-6075-V3 75" (190.5 cm) 65" (165.2 cm) 38 5/8" (93 cm)

SPNL-6000-V2 models

SPNL-6365-V2 64 1/2" (163.9 cm) 56 1/4" (142.8 cm) 31 5/8" (80.4 cm)

SPNL-6375 75" (190.5 cm) 65" (165.2 cm) 38 5/8" (93 cm)

SPNL-6265-V2 64 1/2" (163.9 cm) 56 1/4" (142.8 cm) 31 5/8" (80.4 cm)

SPNL-6275 75" (190.5 cm) 65" (165.2 cm) 38 5/8" (93 cm)

SPNL-6065-V2 64 1/2" (163.9 cm) 56 1/4" (142.8 cm) 31 5/8" (80.4 cm)

SPNL-6075 75" (190.5 cm) 65" (165.2 cm) 38 5/8" (93 cm)

SPNL-6000-V1 models

SPNL-6055 54 1/2" (138.4 cm) 47 5/8" (121 cm) 26 3/4" (68 cm)

SPNL-6065 64 1/2" (163.9 cm) 56 1/4" (142.8 cm) 31 5/8" (80.4 cm)

SPNL-6000P models

SPNL-6365P 64 1/2" (163.9 cm) 56 1/4" (142.8 cm) 31 5/8" (80.4 cm)

SPNL-6375P 75" (190.5 cm) 65" (165.2 cm) 38 5/8" (93 cm)

SPNL-6265P 64 1/2" (163.9 cm) 56 1/4" (142.8 cm) 31 5/8" (80.4 cm)

SPNL-6275P 75" (190.5 cm) 65" (165.2 cm) 38 5/8" (93 cm)

SPNL-6065P 64 1/2" (163.9 cm) 56 1/4" (142.8 cm) 31 5/8" (80.4 cm)

SPNL-6075P 75" (190.5 cm) 65" (165.2 cm) 38 5/8" (93 cm)

CHAPTER 1

WELCOME

8 smarttech.com/kb/171167

Cameras in the corners of the screen track finger and pen positions across the display. The screen

is surrounded by a channel that contains reflective tape.

CAUTION

lKeep the reflective tape dry.

lDo not remove or damage the reflective tape.

IMPORTANT

lDo not attach adhesive notes or other items to the screen because they will interfere with

the cameras.

lDo not place anything in the reflective tape channel because it will interfere with the

cameras.

Pens with erasers

The display comes with two pens with erasers attached.

The display’s bottom frame includes magnetic holders for the pens. Removing a pen from the

holders activates it, and you can use the pen to draw or erase digital ink.

CAUTION

When you return the pen to the magnetic holder, make sure it’s centered in its holder to keep it

from falling and being damaged.

IMPORTANT

Use only pens designed for SMARTBoard 6000 and 6000 Pro series interactive displays (see

smarttech.com/kb/171230).

Page is loading ...

SMART Technologies Board 6000 and 6000 Pro Installation guide

SMART Technologies Board 6000 and 6000 Pro Installation guide

Related papers

Other documents