Speaker System Connections
Connect the speakers using the supplied
speaker cables.
To obtain the best possible surround sound,
adjust the speaker parameters (volume, dis-
tance, etc.).
Notes:
• Be sure to match the speaker cable to the appro-
priate terminal on the components: + to + and – to
–. If the cables are reversed, the sound will be
distorted and will lack base.
•If you use front speakers with low maximum input
rating, adjust the volume carefully to avoid exces-
sive output on the speakers.
Aerial Connections
Connect the supplied FM/AM antenna for
listening to the radio.
Connect the AM loop antenna to the AM
antenna connector.
Connect the FM wire antenna to the FM
antenna connector.
Notes:
•To prevent noise pickup, keep the AM loop
antenna
away from the DVD/CD receiver and
other components.
•Be sure to fully extend the FM wire antenna.
•After connecting the FM wire antenna,
keep it
as horizontal as possible.
TV Connections
Make one of the following connec-
tions, depending on the capabilities of
your existing equipment.
Tips:
• Please refer to the manuals of your
TV, VCR, Stereo System or other
devices as necessary to make the
best connections.
Caution
–
Make sure the DVD/CD Receiver is
connected directly to the TV. Select the
correct AV input on your TV.
– Do not connect your
DVD/CD Receiver
to TV via your VCR. The DVD image
could be distorted by the copy protec-
tion system.
Video connection
Connect the MONITOR OUT jack from
the DVD/CD
Receiver
to the VIDEO IN
jack on the TV using the video cable
supplied (V).
AUX IN
MONITOR
OUT
8
6
6
6
6
6
To Wall Outlet
Before you connect this system to your TV,
be sure to turn off the power and unplug
both units from the wall power outlet before making
any connections.
AM Loop Antenna
FM Wire Antenna
Front Speaker
(Right)
Center
Speaker
Front Speaker
(Left)
Rear Speaker
(Right)
Rear Speaker
(Left)
SUBWOOFER
FRONT
L
REAR
L
SUB
WOOFER
CENTER
REAR
R
FRONT
R
V
VIDEO IN