Speaker System Connections
Connect the speakers using the supplied
speaker cords by matching the colors of the
terminals and those of the cords. To obtain the
best possible surround sound, adjust the
speaker parameters (distance, level, etc.).
otes
Be sure to match the speaker cord to the
appropriate terminal on the components: 3
to 3 and # to #. If the cords are reversed,
the sound will be distorted and lack bass.
Adjust the volume carefully to avoid
excessive volume output to the front
speakers.
Radio Antenna Connections
Connect the supplied AM/FM antennas for
radio listening.
11
Connect the AM loop antenna to the AM
antenna connectors.
22
Connect the FM wire antenna to the FM
antenna connectors.
otes
To prevent noise pickup, keep the AM loop
antenna away from the DVD/CD player and
other components.
Be sure to fully extend the FM wire antenna.
After connecting the FM wire antenna, keep
it as horizontal and flat as possible.
TV Connections
Use one of the following connection
setups, depending on the capabilities
of your TV.
Video Connection
Connect the MONITOR OUT jack from
the DVD/CD player to the video in jack
on the TV using the video cable supplied
(V).
S-Video Connection
Connect the S/VIDEO OUT jack from
the DVD/CD player to the S-Video IN
jack on the TV using the S-Video cable
(S).
Component Video (Color
Stream
®
) Connection
Connect the COMPONENT VIDEO
OUT/PROGRESSIVE SCAN jacks from
the DVD/CD player to the correspon-
ding in jacks on the TV using an Y Pb Pr
cable (C).
Progressive Scan (ColorStream
®
pro) Connection
If your television is a high-definition or
“digital ready” television, you may take
advantage of the DVD/CD
player’s
progressive scan output for the highest
video resolution possible.
If your TV does not accept the Progressive
Scan format, the picture will appear
scrambled if you try Progressive Scan on
the DVD/CD
player .
Connect the COMPONENT VIDEO
OUT/PROGRESSIVE SCAN jacks from
the DVD/CD Receiver to the correspon-
ding in jacks on the TV using an optional
Y Pb Pr cable (C).