2. Angelo Decor
  3. AD73194

Angelo Decor AD73194, Amphora Springs In-Ground Water Feature Operating instructions

  • Hello! I've reviewed the Angelo Decor fountain user manual and I'm ready to help. This document provides detailed instructions for setting up your fountain, including both above-ground and in-ground installation options. The manual also covers the use of a flow restrictor and recommends maintaining the water level at 3/4 full to prevent pump burnout. Feel free to ask me any questions you have about the installation or maintenance of your fountain.
  • Where can I find more information about my fountain?
    What should I do if I have problems with my fountain?
    How full should I fill the fountain with water?
Thank you for buyin
g
an An
g
elo Decor Fountain! Page 1
We ho
p
e
y
ou will find these instructions hel
p
ful in settin
g
u
p
y
our fountain. If
y
ou need more
information to
p
ro
p
erl
y
care for
y
our fountain,
p
lease DO NOT return the unit to
p
lace of
p
urchase.
Please visit our web site, www.an
g
elodecor.com, for assistance and warrant
y
information.
First un
p
ack carton carefull
y
, arran
g
in
g
p
arts safel
y
in
y
our workin
g
area.
Above Groun
d
In-Ground
Place reservoir on level ground or for in-ground set-up, dig a hole and ensure reservoir is level.
Place pump in reservoir. We suggest setting flow to full strength for best effect.
Pump should sit flat on bottom.
For in-
g
roun
d
installation, back fill
j
ust below top of reservoir. Install centre plate as illustrated.
A restrictor has been provided which may need Twist and secure feature into place.
to be adjusted to control flow
Thank you for buyin
g
an An
g
elo Decor Fountain! Page 2
We ho
p
e
y
ou will find these instructions hel
p
ful in settin
g
u
p
y
our fountain. If
y
ou need more
information to
p
ro
p
erl
y
care for
y
our fountain,
p
lease DO NOT return the unit to
p
lace of
p
urchase.
Please visit our web site, www.an
g
elodecor.com, for assistance and warrant
y
information.
Connect tubing from feature to pump outlet. Install remaining side plates (2).
Install pump access door. Using tube provided, apply silicone along seams. Add decorative rocks on top of tray.
In-Ground Above Ground
A great addition to any setting, above or below ground!
Now sim
p
l
y
fill with clean water and
p
lu
g
into a
g
rounded GFCI outle
t
We recommend kee
in
bowl 3/4 full of water to avoid
um
burnout.
/