Pyle PL1SN104 10.1 Inch Touch Screen TFT or LCD Monitor Single Din MP5 Player User manual

Brand: Pyle

Model: PL1SN104 10.1 Inch Touch Screen TFT or LCD Monitor Single Din MP5 Player

Category: Car TFT monitors

Type: User manual

Adjustable Viewing Angle

(Maximum Angle 360°)

10.1'' Touch Screen TFT/LCD Monitor

Single Din MP5 Player With Swivel Screen, Phone Link, With Backup Camera

PL1SN104

User’s Manual

www.PyleUSA.com

Precautions

Wiring Diagram

General Operation

AM/FM Tuner Operation

Multimedia player

Music playing interface

Viedo or Picture playing interface

AUX in/ Rearview Camera

Wireless BT Streaming

AutoLink Software (Phone Link)

Setting Menu

Troubleshooting

Systematic Parameter

Disassembly Steps of Display

Rear View Backup Camera Installation

Precautions

1. When the interior of the car is extremely cold and the unit is used soon after switching on the

heater, moisture may form on the disc or the optical parts of the player and proper playback

may not be possible. If moisture forms on the disc, wipe it off with a soft cloth. If moisture forms

on the optical parts of the player, do not use the player for about one hour. The condensation

will disappear naturally allowing normal operation.

2. This unit uses precision parts and components for its operation. In the event that trouble arises,

never open the case, disassemble the unit, or lubricate the rotating parts. Contact your service

center.

3. This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec

tion against harmful interference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio reception, which can be determined by turning the

equipment off and on, the user is encouraged to consult an experienced radio technician for

help.

www.PyleUSA.com

Wiring-Back Panel:

Wiring-Color Wiring:

www.PyleUSA.com

General Operation:

Profile of main interface

1.Time Setting

2. Radio

3. Bluetooth

4. USB

5. SD Card

6. Navigation (optional)

Note: If there is no any device connection, icons for USB, SD will be showed no device. Click is

invalid in this case. Display setting is invalid if there is no audio or video playing.

Radio

• Radio Region: Set the unit for one for the following regions: Europe, America, China, Russia,

Japan, RDS (on/off)

Multimedia player

• Support lots of video and audio formats

• Subwoofer: Tum the subwoofer output On or Off

• EQ-Sertting: Pop, Rock, Classic, Jazz or Off

Time

• Slide the figures in the set time interface

Language

• Language: Select desired language(English, Spanish, Deutsch, Russian, Portuguese, French,

Chinese, etc.

Camera input

• Connect the camera with this device, can be auto detected brake signal when reversing.

(Note: Camera is not included)

1 2 3 7

54 6 10

11 12

7. Steering Wheel Control Setting

8. EQ

9. Wallpaper

10. AUX

11. AutoLink

12. Settings

Car logo

• Preset car logo to match your car brand

Steering wheel control

• Set the function button on you steering wheel via the system learning setting

AUX Input

• Connect an optional audio video source to the Aux input

AM/FM Tuner Operation

Radio interface RDS turn on function

Touch Radio icon in main interface to switch to radio mode.

Multimedia player

• Support MP3.WMA.AVI,MOV,MP4,RMVB,VOB,FLV,etc media format

• Support SD,USB,MMC

• Support JPEG,BMP,PNG etc.picture format

Music interface

• The system will automatically read USB, SD.

• The user can directly click options in directory menu to perform play.

www.PyleUSA.com

Short press this button to downward search the station semi-automatically

Short press this button to upward search the station semi-automatically

Switch the receiving band

Locate / remote channel

Single track, In FM band, press this button to switch between ST and MONO,

The default setting is ST. AM band doesn”t have this function

Scan

www.PyleUSA.com

1. Click the icon to enter the playlist

Play / Pause

Select Previous Program / Title / Song

Select Next Program / Title / Song

Volume

Selection

Title Menu

Video or Picture playing interface

Note: Sliding the controlling bar in the bottom to show the next page.

AUX in (Auxiliary device input)

Click in from the main interface SRC key in remote control to switch to

AUX in Mode. AUX in enables external media sources to connect to the

system, like camera, video games, Walkman, external navigation box

(controlled by remote controller)etc. No auxiliary device input shows at the

below picture. Connect external devices through the 3.5mm auxiliary

audio/video input. It can display the corresponding picture as the output

video.

Rearview Camera

Auto operation: After connect with reverse camera, it will automatically

detectthe reverse signal and show the reverse pictures. The system will

swift to any mode to rear view lens mode automatically. When reverse is

over, the system will come back to previous mode.

Wireless BT Streaming

Wireless BT Music

The phone must support A2DP agreement. Press BT Music icon in the main interface. Under the

connected mode, click play keys in Wireless BT interface to play different music formats restored

in the phone. Due to different types of phones, music can be played either by choosing music

player on the phone or click the play key in the Wireless BT interface.

www.PyleUSA.com

EQ Setup

Phone BT Phone

Phone Book BT Music

Dialing

Call records

Phone book

Bluetooth music

Settings

Settings Default Options Function

BT On BT is in standby when the device is

turned on

Device Not Paired Device Name

When connected, the current Wireless BT

device name will be displayed. Press the

device name to display a list of available

devices that can be connected.

Connect Auto After connect with the same device one

time, it will be auto connected next time.

Auto Answer Manual Manual You must press the Talk button to answer

an incoming call

Auto All incoming calls will be automatically

answered

www.PyleUSA.com

AutoLink Software(Phone Link)

Connect your ANDROID phone or iPhone to the unit with original USB cable,

touch the AutoLink icon,open the menu,then follow the instructions.

AutoLink connects your device to your Android mobile phone and iPhone

through the standard USB port and transfer the picture and sound from the

phone to the device. You can control the phone through the device's screen ,

such as receiving calls, dialing calls, listening to music, watching movies or

photos.

AutoLink

www.PyleUSA.com

AutoLink

www.PyleUSA.com

Setting

System Setting Disc Setting

Time&Date Setting Vsurround Setting

Frames Adjust Setting Panel Setting

Ledcolor Setting Version Setting

www.PyleUSA.com

Phenomenon

Normal

Not operating

Remote comtrol

doesn' t work

No or low sound

Inferior quality of

sound; Distortion

of sound

Machine reset by

itself when it is

shut down

Reasons

Fuse of machine power supply and auto

vehicle battery is burnt,

Volatge of power supply is overloaded

Automatic protection system avoids fault

due to illegal operation

Wrong pin assignment ISO connector

Battery is out of power;

Battery is not placed correctly

Disconnection;

Volume setting is low volume; wrong

connection of Silence; Loudspeaker fault;

Volume balance setting bias Earthing in

loudspeaker connection

Inferior disc is used;

Loudspeaker does not match impedance

of the machine; Loudspeaker opens circuit.

Connection of ACC and B+ is not correct.

Solutions

Change for fuse of the

cottect types;

Adjust voltage;

Reset the system by pressing the

Resetkey Check the wiring

diagram

Change new battery;

Reinstall battery

Check the connecion; Increase the

volume; Reconnection the silence

wire complied with the installation

instruction; Change for a new

loudspeaker; Adjust the volume

balance setting to middle place;

Keep insulation of loudspeaker

connection

Use genuine discs;

Change a loudspeaker;

Check the connection of loudspeaker.

Check and reconnect ACC and B+

Troubleshooting

Wheel Set Setting

Connect the steering wheel control cable, and click the corresponding key to

activate the function.

After entering into the steering wheel control interface, then keep pressing

the steering wheel “VOL+” button in your car, at the same time click

“ ”in the interface, it will be selected, then it is finish this setting.

Click other buttons according this method, the steering wheel function can

be used.

www.PyleUSA.com

Trouble

Radio

Weak signal

Disc/Card Reading

Break-down

during playing

Wrong information

is shown on the

panel

Error or not

operating

Disc cannot enter

the device Disc

does not play

SD card readable

by PC but

unreadable by

the device

Nonrepeat and

search function

while play VCD

Cause(s)

Auto antenna does not reach out completely

LOG function is under working state

Disc is stained or scratched; Documents or

records are damaged

The screen cannot display all the

information.

Illegal operation

There is disc already in side the devic. Disc

is not fully accepted.

The disk level surpasser the level setting of

Lock function; The area code of the disc is

not compatible; Disc is turned upside down.

Due to compatibility reasons of SD card

brand, not all of the SD card can be read

under the system. Or you may wrongly use

MMc card as SD card.

PBC service is functioning

Solution (s)

Connect auto antenna line correctly;

Close LOC function.

Clean or replace the disk; Replace the

disk or choose stored file

Hold the EJECT key for 5 senconds to

reread the device.

Take out the disk inside the machine

and replace a new disc Transport the

screws

Adjust the level setting of Lock feature;

Use a compatible disk; Keep the side

with sign up when insert the disk.

The present system mainly support the

following SD card brands: San Dick,

KingMAX, Kingston, Panasonic,

Apacer etc.

Shut down PBC service

Turnover screen

does not open

automatically.

No image

Unstable output

of images

Images being

stretched or

compression

Auto Open of turnover screen setting

is OFF.

Connection of brake wire is not correct;

Not brake state

DVD does not correspond with the present

system video setting;

Video signal line is not connected correctly.

Inappropriate image proportion setting

Auto Open»ON

Connect brake wire with cathode of

power supply correctly; Keep brake

state after car is placed safe.

Adjust system video setting;

Check and make sure of the

connectivity. Unsupported code

Adjust image setting

www.PyleUSA.com

Systematic Parameter

Specifications

• Working voltage: Direct current 12V

• Working voltage range: 10.8V-16V

• Maximum working electronic current: 10A

• Installation angle: less than 30 degree

tilted the front side and backside

Device Type(•*)

USB/SD • MP3

• WMA

• JPEG (1080x920)

• AVI

• RMVB

• MPG

• DAT

• Power output: 4X80 W

• Impedance 4ohm

• SNR: 70dBA

• Frequency Response: 20Hz-20kHz

Video

• Standards: NTSC. PAL (Auto recognition)

• Output: 1 Vp-p (75ohm)

• Input: 1Vp-p (75ohm)

Features:

• Single Din Size Universal Standard

• Hi-Res 10.1'' Digital Display

• Full HD 1080 Support

• USB Flash Drive Reader

• AM/FM Radio with 30 Station Memory

• Video Aux (RCA) Input/Output Connector

Jacks

• Rearview Backup Camera Support

• Audio Aux (RCA) Input/Output Connector

Jacks

• Marine Grade Waterproof Construction

• Night Vision Illumination

• Total Pixels: 656 x 492

• 170 Degree Wide Viewing Angle

• 420 TVL Horizontal Resolution

FM Radio

• Frequency modulation:

87.5 MHz ~108.0MHz (Europe)

• Flexibility (-30dB):10dBu

SNR (-50dB):15dBu

• Frequent sound range: 30H2~15kHz (+3dB)

AM Radio

• Frequency range:

522KHZ-1620KHZ (Europe)

• Sensitivity (SN=20dB): 20dBu

• Image rejection: 60dB

• Frequency response: 50HZ-2KHZ (+-3dB)

Display

• Screen type: TFT

• Response time: up=30 millisecond.

• Down=50 millisecond

• Angle range: depression angle=65°

• elevation angle=40<>

• Left vision=65 Right vision=65

Environment temperature

• Operation temperature:

-4°F~158°F or -20~+70°C

• Maintenance temperature:

-22°F~176°F or -30°C~80°C

• Operating humidity: 45%~+80%°C

(relative humidity)

• Maintenance humidity: 30%~90%

(relative humidity)

www.PyleUSA.com

Disassembly Steps of Display

1. Pull the two clips(A&B) on the

back of the display to both sides. 2. Remove the display.

3. Press the clips toward the center

and unplug the cable. 4. Disassembly completed.

www.PyleUSA.com

Rear View Backup Camera Installation

WARNING: Failure to read and follow these warnings and instructions may result in serious injury, including

damaged property, so please pay close attention and exhibit the utmost care.

• The Digital Backup Camera is designed as an aid to the driver in detecting potentially hazardous driving

conditions, obstructions, and large stationary objects. You, the driver, must also remember to drive safely and

properly. Use of the Digital Backup Camera is not a substitute for safe, proper and legal driving practices.

• Never back up while looking only at your connected monitor display screen. You should always check behind

and around the vehicle when backing up just as you would if the vehicle did not have the Digital Backup

Camera. Always make sure your driving area is clear. Always back up slowly and with caution.

• Never depend on the Backup Camera entirely when backing up. The image on the monitor display screen may be

slightly diﬀerent from actual and real-time conditions. Objects viewed in the rear view monitor diﬀer from actual

distances because a wide-angle lens is used. So use the camera as an aid and always follow intended driving

practices to properly judge distances from objects.

• The Backup Camera's assisted low lux lighting performance feature is also an aid to a driver. Always use your own

eyes to conrm the vehicle’s surroundings, as the displayed image may be not well lit or not entirely visible.

Always proceed with caution and perform double-checks before proceeding.

• The area displayed by the Backup Camera is limited. It does not display objects that are close to or just below the

bumper, underneath the vehicle, or objects out of the camera’s view. The camera's view can change according to

your vehicle's orientation on the road or changing road conditions.

• Be sure to check the camera is properly functioning, is properly positioned and securely mounted, every time

you operate your vehicle.

• Make sure your trunk or hatch operates correctly, as intended, before and after installation.

• Proceed with caution when cleaning your vehicle around the camera. Avoid excess water exposure around the

camera especially with spraying or a power washer.

• Please make sure to keep the camera clean and unobstructed from any debris

• Follow all traﬃc laws and motor vehicle regulations.

• Consult local laws and regulations for any restrictions on installation or use.

• Using a Backup Camera System is not adequate enough to completely eliminate a vehicle’s blind spot. Always

remember to drive with caution, following all traﬃc laws.

Please read all of the installation instructions carefully before installing the product. Improper installation

will void manufacturer’s warranty. The installation instructions do not apply to all types of vehicles, and are

written as guidelines to assist in installing the system. Please consult an experienced technician if you are

not comfortable installing the product. Prior to using and installing the Backup Camera System, please read

the safety information provided in this user manual. Be sure to use the product as outlined in this user

manual. Altercation or modications carried out without appropriate authorization may invalidate the user's

right to operate the equipment.

www.PyleUSA.com

System Installation and Wiring

Note: Camera System installation on diesel vehicles may require a slightly different wiring install.

Caution: Connecting to other types of electrical systems will cause damage to your vehicle. Please

contact the manufacturer if you are unaware of the system type in your vehicle. Refer to the model's

power requirements prior to connection and installation.

QUICK INSTALLATION:

This rearview backup camera system comes with camera and installation wiring. When installing, the

camera is preferably to be mounted in the rear of your vehicle (just above the license plate).

This kit includes necessary wiring and cable connector accessories sufficient for typical connections.

However, additional accessory cables and installation materials may be necessary for completely

secure and operational backup camera performance.

Camera Connection:

Connect the camera to the using the included DC 12V power cable. Connect the DC 12V power cable

to the positive 12V reverse tail light in the rear of your vehicle. Then, connect the black wire, of the

DC 12V power cable, and ground properly. This connected power and ground cable then connects to

the camera, and will supply power to the camera directly.

Next, use the included yellow RCA video connector cable, and run that cable from the yellow RCA

video connector jack of the camera,to the yellow video connector of your compatible display monitor.

The yellow RCA cable when connected, automatically retrieves the video signal when activated (when

your vehicle is switched into the reverse gear).

Installation Transcript:

1. Locate the reverse taillight wiring behind your vehicle's reverse light. You may need to remove an

interior panel, or other cover, in order to locate the wiring. Connect the included power 12V DC

power cable to the reverse light.

a. Connect the power cable's Red wire to your vehicle's reverse light positive wire.

b. Connect the power cable's Black wire to your vehicle's reverse light negative wire.

2. Connect the camera to this 'reverse light' connection installation, then mount the camera in the

desired location.

3. Run the RCA video cable from the camera to your compatible video display monitor.

* Please remember to run cables in the least obtrusive route possible. Vehicle vibrations and bumpy

driving conditions ca result, so extra care should be taken to securely mount the camera and fasten

all cables and wiring to secure locations.

* Ensure the wires are safely and securely connected, with proper isolation applied to all connections.

Additional Notes:

• Determine the best location for the camera (The camera is preferably mounted just above the license

plate).

• Be sure when running the connection cables to leave a small amount of slack so you can still move

the camera around the license plate, if you decide to slightly adjust the camera's positioning at a later

time.

• After installation, test the camera before use. Placing your vehicle in reverse should provide a picture

in the monitor within the rearview mirror assembly.

Questions? Issues?

We are here to help!

Phone: (1) 718-535-1800

Email: [email protected]

www.PyleUSA.com

Angle Adjustable Camera Lens

• Located on the camera housing are 2 screws which lock the camera lens angle in position.

• The screws may be loosened to allow camera lens angle adjustment

• Loosen the screws, adjust the camera lens into the desired angle. then tighten the screws securely.

• Be sure as to not overtighten the screws.

Pyle PL1SN104 10.1 Inch Touch Screen TFT or LCD Monitor Single Din MP5 Player User manual

Brand: Pyle

Model: PL1SN104 10.1 Inch Touch Screen TFT or LCD Monitor Single Din MP5 Player

Category: Car TFT monitors

Type: User manual

Download PDF

report

Pyle PL1SN104 10.1 Inch Touch Screen TFT or LCD Monitor Single Din MP5 Player User manual

Pyle PL1SN104 10.1 Inch Touch Screen TFT or LCD Monitor Single Din MP5 Player User manual

Related papers

Other documents