Genexis EX600 is a versatile device that can be used as a router, wireless extender, or wired extender. It features a sleek design and is easy to set up and use.
With the EX600, you can extend the range of your existing Wi-Fi network, eliminating dead spots and improving coverage in your home or office.
The EX600 is also equipped with a number of advanced features, including support for the latest Wi-Fi standards, MU-MIMO technology, and beamforming. These features help to improve the speed, range, and reliability of your Wi-Fi network.
Here are some of the key features and benefits of the Genexis EX600:
Genexis EX600 is a versatile device that can be used as a router, wireless extender, or wired extender. It features a sleek design and is easy to set up and use.
With the EX600, you can extend the range of your existing Wi-Fi network, eliminating dead spots and improving coverage in your home or office.
The EX600 is also equipped with a number of advanced features, including support for the latest Wi-Fi standards, MU-MIMO technology, and beamforming. These features help to improve the speed, range, and reliability of your Wi-Fi network.
Here are some of the key features and benefits of the Genexis EX600:
EX
Pulse Series
Installation Guide
Wi-Fi EasyMeshTM suppoted
Box contents
• Genexis Pulse EX
• Power adapter
• Nework cable
• Labels (self-adhesive)
• Plugs & screws
Placement
Pulse EX suppots wo placement
options; desktop and mounted
to a wall. It is recommended to place
the device ‘away’ from objects.
Desktop
. Place the device horizontally on a
lat suface.
Wall mount
. Download and print the drilling
guide from htps:genexis.eu
productpulsedownloads
. Use the drilling guide to drill the
holes, inset plugs and put
screws into place.
Use the wall mount points on the back of the
Pulse EX to mount the device to the screws.
Various translations of this document (if available) and additional product
information can be foundon htps:genexis.euproductpulsedownloads
Installation guide
Pulse EX can be setup as a router or wirelesswired extender.
You're just a few steps away to install your device
via the Genexis EasyWiFi app
Installation with use of app
Scan QR-code
Download app and
follow the steps
Extender placement
For optimal peformance of the
Pulse EX as extender; place the
Pulse EX halfway in beween
your router and the problem area (as
shown below). Make sure placement
is within WiFi range of your router. If
the extender is placed too far away, it
cannot connect to the router.
Pulse EX
Router
Problem area, improved
by Pulse EX
Area that is good for
placing Pulse EX
Area covered by your
router
Installation of your Pulse device(s)
This installation guide is for installing
the Pulse EX as a router, as
explained on the right. In addition, an
extra Pulse EX can be installed as
a wireless or wired extender behind
the Pulse EX router.
Router
If you do not have a router installed,
stat installing your Pulse EX here:
. Place your Pulse EX near your
broadband outlet.
. Connect a nework cable beween
your broadband outlet and the
Pulse EX WAN pot (red pot).
. Plug the power adapter into an
electrical socket and connect it to
the power pot at the back of
the Pulse EX.
. Flip the ONOFF switch at the
back of the device to turn it on.
. Wait until the Status LED stops
blinking and turns solid green.
Your Pulse EX is now setup as a
router. Your nework is now ready to
be extended with a wireless or
wired extender, as explained on the
next pages.
Switching the WiFi ONOFF
The WiFi function of the Pulse EX
can be switched ON or OFF by
means of the Mode buton.
• Switch OFF: On the Pulse EX,
press and hold the Mode buton until
the Status LED turns solid yellow.
• Switch ON: On the Pulse EX,
press and hold the Mode buton until
the Status LED stats blinking green
or turns solid green.
Connecting to the wireless nework
You can connect your personal
device (e.g., mobile phone) to the
Pulse EX via manual pairing. If
automated pairing is prefered, please
check for your speciic device how
this can be initiated. Before pairing,
make sure the Status LED is solid
green. If not, switch the WiFi ON as
described in this installation guide.
Manual pairing
The WiFi nework name and WiFi key
are printed on the labels of the
Pulse EX router.
. Peform a search of available
wireless neworks on your personal
device or scan the QR-code on the
label on the botom of the
Pulse EX.
. Select the WiFi nework name
printed on the label on the botom
of the Pulse EX.
. Enter the WiFi key printed on the
label of the Pulse EX.
Follow the instructions of the router
in case the Pulse EX is in
extender mode.
Wireless extender
. Place the additional Pulse EX
as described on the let.
. Plug the power adapter into an
electrical socket and connect it to
the power pot at the back of
the Pulse EX.
. Flip the ONOFF switch at the
back of the device to turn it on.
. Wait until the Status LED
surrounding the Mode buton
stats blinking green.
. On the Pulse EX, press and
release the Mode buton once. The
status LED will stat blinking blue.
. Press the same Mode buton on
the Pulse EX router within
wo minutes.
. Automated pairing is now stated.
. The Status LED turns solid blue
indicating that pairing of the Pulse
EX extender with the router
is successful (the Pulse EX will
automatically reboot ater the
automated pairing; this may take
up to several minutes).
. Wait until the Status LED stops
blinking and turns solid green.
Your Pulse EX is now setup as a
wireless extender.
Wired extender
. Connect a nework cable beween
the LAN pot (yellow connector)
of the Pulse EX router and the
WAN pot (red connector) of the
Pulse EX extender.
. Plug the power adapter into an
electrical socket and connect it to
the power pot at the back of the
Pulse EX extender.
. Flip the ONOFF switch at the
back of the device to turn it on.
. Wait until the Status LED stops
blinking and turns solid green
(the Pulse EX extender will
automatically reboot during the
setup; this may take up to
several minutes).
Your Pulse EX is now setup as a
wired extender.
LED & buton oveview
Status
Green – system is operational ready
Green (blinking) – connectiviy lost
Yellow – system statup or WiFi OFF
Yellow (blinking) – system is not ready
Blue – automated pairing (WPS) successful
Blue (blinking) – automated pairing (WPS) in progress
Red – system booting failure
O – power o
Mode buton
Pairing (WPS) – press and release once
WiFi ON – press and hold until Status LED turns
green (blinking or solid)
WiFi OFF – press and hold until Status LED turns
solid yellow
Changing your nework setings
You can access the Pulse EX
web inteface (GUI) to change your
nework setings. The Pulse EX
must be in router mode to access
the GUI.
. Use a web browser on your
personal device and navigate to
the GUI URL as printed on the label
on the botom of the Pulse EX
. Login using the credentials as
printed on the labels on the
botom of the Pulse EX.
Power saving options
Power saving options are available via
the web inteface.
Pot oveview
Power pot
ONOFF
switch
LAN pots Reset
buton
WAN pot
USB .
pot
ONOFF switch
Switch ON – lip the switch to ON
Switch OFF – lip the switch to OFF
Reset buton (recessed)
Reboot – press and release once
Factoy reset – press and hold until the
Status LED stats fast blinking green
Troubleshooting
Is the Status LED solid red?
Contact your sevice provider.
Is the Status LED solid yellow?
The WiFi of the Pulse EX is turned
OFF. Please turn the WiFi ON as
described in this installation guide.
Is the Status LED not solid blue ater
automated pairing (WPS)?
Automated pairing (WPS) beween
the Pulse EX and Genexis router
or personal device failed. Please follow
the instructions again to setup the
Pulse EX as a wireless extender
or connecting your personal device
to the wireless nework. It might be
helpful to move the Pulse EX
closer to your Genexis router.
Is the Status LED blinking green for
minutes?
• Router: Pulse EX does not have
a connection with the broadband
nework. Please verify your wired
connection with the broadband
outlet or contact your
sevice provider.
• Wirelesswired extender:
Connection beween the Genexis
router and the Pulse EX is
not stable. Please check the cable
connection with the Genexis router
or move the Pulse EX closer to
the Genexis router.
Is the Status LED blinking yellow?
The Pulse EX is being upgraded
with new soware. Please wait until
the Status LED turns solid green again.
Return the Pulse EX to factoy
default setings
With the reset buton you can reset
the Pulse EX to its factoy default
setings. You can press this buton
with a small pin or paperclip.
. Press and hold the reset buton
until the Status LED stats fast
blinking green.
. Wait until the Status LED turns
solid green again.
Your Pulse EX is now setup as
a router again with the setings as
printed on the label of
the Pulse EX.
Company Name
Genexis Netherlands B.V.
Company Address
Lodewijkstraat a
AC Eindhoven
The Netherlands
Name and title of authorized person
Maaten Egmond, CTO
Signature of authorized person
Place of issue Date of issue
Eindhoven --
The Netherlands
Hereby, Genexis Netherlands B.V. declares that the product Pulse EX is in
compliance with Directives EU, EC, EU and
Delegated directive .
The full text of the EU declaration of conformiy is available at the following
internet address: htps:genexis.euproductpulseredpulse-ex
EU Declaration of Conformiy
Frequency bands and maximum radio frequency power transmited
The Pulse EX operates in the frequency bands of , Ghz and Ghz.
The maximum radio frequency power transmited in these bands is:
• dBm( mW) (EIRP)for the MHz – . MHz band
• dBm ( mW) (EIRP)for the MHz – MHz band *
• dBm ( mW) (EIRP) for the MHz – MHz band
* In EU, – MHz is restricted to indoor.
Genexis assumes no responsibiliy for any inaccuracies in this document. Genexis reseves
the right to change, modify, transfer, or othewise revise this publication without notice.
Revision . August , Copyright © Genexis Netherlands B.V. All rights reseved.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
Genexis EX600 is a versatile device that can be used as a router, wireless extender, or wired extender. It features a sleek design and is easy to set up and use.
With the EX600, you can extend the range of your existing Wi-Fi network, eliminating dead spots and improving coverage in your home or office.
The EX600 is also equipped with a number of advanced features, including support for the latest Wi-Fi standards, MU-MIMO technology, and beamforming. These features help to improve the speed, range, and reliability of your Wi-Fi network.
Here are some of the key features and benefits of the Genexis EX600:
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Genexis Pulse Full Installation Manual
-
-
Genexis E600 Installation guide
-
-
-
-
-
Genexis XGS2114-2.5G Installation guide
-
Genexis P2410 Installation guide
-
Genexis XGS2120-2.5 Installation guide
Other documents
-
Motorola AAH38KDH9DU6 N Basic Service Manual
-
SMC EX600-SCF1-X60 Owner's manual
-
SMC EX600-SEN3 Quick start guide
-
SMC Networks EX600-SPR*A Operation Manuals
-
Panasonic PTEW630U Datasheet
-
Panasonic PTEW630 User manual
-
Panasonic PT-EX600E User manual
-
Panasonic PT-EW530U User manual
-
-
Sony MHC-EX700 Operating instructions