Braeburn 7205 Installation guide

Braeburn
Brand
Braeburn
Model
7205
Category
Thermostats
Type
Installation guide
Wi-Fi Setup Guide
Model 7205
Universal Programmable
Smart Wi-Fi Thermostat
Leave this Setup Guide
with thermostat.
7205-105-01
3
Wire and Install Thermostat
• Properly wire and congure thermostat.
Refer to the Installer Guide.
• Refer to the User Manual for programming
and maintenance.
Before beginning setup you will need to:
• Know your Wi-Fi network name and password
• Have a valid e-mail address
• Get the FREE app
Apple
®
Devices:
Download the BlueLink
Smart Connect
®
application
from the Apple
®
App Store
Android
TM
Devices:
Download the BlueLink Smart Connect
®
application
from the Google Play Store
Desktop Computer:
Go to www.bluelinksmartconnect.com and create an account.
NOTE: For Registration, your desktop PC must have a
wireless connection.
3.1 Open the BlueLink Smart Connect App.
Select REGISTER and enter a valid
e-mail address.
3.2 Enter the thermostat serial number. You can
locate this number on the back of the thermostat
or on the enclosed thermostat registration card.
NOTE:
If you removed the thermostat to locate the
serial number, make sure to reconnect it before
selecting ENTER.
3.3
Complete the remaining registration screens.
Once you reach the Create Account screen,
select REGISTER.
Login and Register
4.1 Enter your network name (SSID) and password,
select ENTER.
NOTE:
The network name and password are
case sensitive fields.
The application will now instruct you to put the
thermostat into Wi-Fi connect mode.
4
Enter Network Information
1
2
Set-Up for Connection
NOTE: Wi-Fi works without common (C)
wire on most systems; requires common on
Heat Pump, Heat Only or Cool Only Systems
Helpful videos can be found at
www.bluelinksmartconnect.com/wi.
®
Enable Wi-Fi on Thermostat
5.1 On the thermostat, press and hold the
HOLD and RETURN buttons for
3 seconds.
5.2 The display will alternate the words WIFI
and SCAN and the symbol will ash.
5
+
6.1
The application will prompt you to go
to your smartphone, tablet or computer
Wi-Fi settings and select the bluelink_wifi
network. See samples shown.
NOTE: Do not exit the application. Minimize it so
that you can return to the same screen after
selecting the bluelink_wifi network. This is
usually done by pressing the home button on your
smart phone or tablet.
Connect to Thermostat
6
Android
TM
Sample
Apple
®
Sample
Complete Setup
7.1 After selecting the bluelink_wifi network,
use the home key to return to the application
and select OK.
7.2 The word WAIT will appear in the
thermostat display.
7.3 Once a connection is made, Connection
Successful will appear in the application
screen. At thermostat, your network name
followed by the MAC address will appear.
7.4 At thermostat, press RETURN to exit Wi-Fi
setup mode.
NOTE: After setup is complete, make sure to
return your phone or tablet to the original wireless
network.
7
Braeburn Systems LLC
2215 Cornell Avenue • Montgomery, IL 60538
www.braeburnonline.com
844-BLU-LINK (844-258-5465) (U.S.)
630-844-1968 (Outside the U.S.)
©2017 Braeburn Systems LLC • All Rights Reserved • Made in China.
7205-105-01
Record Network Information for Future Reference
Network Name (SSID)
Network Password
Thermostat Serial Number #
You may need this information later or if calling for support.
Visit www.bluelinksmartconnect.com for helpful videos.
Apple and the Apple logo are trademarks of Apple Inc.,
registered in the U.S. and other countries. App Store
is a service mark of Apple Inc. All other trademarks
are the property of their respective owners.
®
Changing Your Wi-Fi Settings
First Clear Your Thermostat Wi-Fi Settings
1. Press and hold the RETURN button for 4 seconds.
2. The display will change showing the rst User Option.
3.
Press RETURN until you see the word WIFI in the display
.
4. Press the button until WIFI CL appears.
5.
Press RETURN to exit and clear all Wi-Fi settings.
Then Update Your App Settings
1. Open the app and select Update Account.
2. Enter your account password.
3. Select Wi-Fi Settings.
4. Select the thermostat you wish to change.
5. Choose WI-FI Network or WI-FI Password and
select Enter.
6. Update the information and select Enter.
NOTE: To complete setup, follow the instructions in
the app and refer to sections 5 - 7.
NOTE: If you are already connected to a Wi-Fi network, you will see the network name
(
SSID)
displayed 4 characters at a time with a solid symbol. If needed, clear Wi-Fi
settings and return to step 5.1 (See Changing Your Wi-Fi Settings).
If you are not connected to 24 VAC, the thermostat
will display POWR NO (No Power).
  • Page 1 1
  • Page 2 2

Braeburn 7205 Installation guide

Braeburn
Brand
Braeburn
Model
7205
Category
Thermostats
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents