2. Socomec
  3. ATyS r - ATyS d
ATyS r - ATyS d

Socomec ATyS r - ATyS d, ATyS g, ATyS p, ATyS t Quick Start

  • Hello! I am an AI chatbot trained to assist you with the Socomec ATyS r - ATyS d Quick Start. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • Who should install and service the ATyS r - ATyS d?
    What precautions should be taken before working on the ATyS r - ATyS d?
    What is the maximum number of auxiliary contacts that can be mounted on the ATyS r - ATyS d?
    What is the difference between the ATyS r and the ATyS d?
    What is the torque for the screws used to mount the auxiliary contacts on the ATyS r - ATyS d?
Recto-verso / papier blanc offset 80g/m
2
/ noir et blanc / format ouvert : 210x297mm / format plié : 105x148,5mm - Non contractual document. Subject to change without notice.
DANGER
•
Thisequipmentmustbeinstalledandservicedonlybyqualiedelectrical
personnel.
• Turn off all power supplying this equipment before working on or inside
equipment.
• Alwaysuseaproperlyratedvoltagesensingdevicetoconrmpowerisoff.
• Replace all devices, doors, and covers before turning on power to this
equipment.
• Maintain electrical clearances between cable and live parts.
Failure to follow these instructions will result in death or serious injury.
DANGER
• L’installation et l’entretien de cet appareil doit être effectués que par du
personnelqualié.
• Coupez l’alimentation de cet appareil avant d’y travailler.
• Utilisez toujours un dispositif de détection d’absence de tension (VAT) pour
conrmerqueleproduitesthorstension.
• Replacez tous les dispositifs, les portes et les couvercles avant de mettre
cet appareil sous tension.
• Vérierlesdistancesd’isolemententrelescâbles,etégalemententreles
câblesettoutespartiesmétalliques.
Si ces précautions ne sont pas respectées, cela pourrait entraîner de graves
blessures, une électrisation, voir même une électrocution.
PELIGRO
•
Solamente el personal de mantenimiento eléctrico especializado debera
instalar y prestar servicios de mantenimiento a este equipo.
• Desenergice el equipo antes de realizar cualquier trabajo en él.
• Siempreutiliceundispositivodetectordetensiónadecuadoparaconrmar
la desenergización del equipo.
• Vuelva a colocar todos los dispositivos, las puertas y las cubiertas antes de
energizar este equipo.
• Mantenga un espacio adecuado para la instalación eléctrica entre el cable y
las piezas energizadas.
El incumplimiento de estas precauciones podrá causar la muerte o lesiones
serias.
EN
FR
ES
QUICK
START
543 309 A - 10/14
www.socomec.com
http://www.socomec.
com/en/changeover
ATyS Mounting of Auxiliary Contacts
Applicable to ATyS r, d, t, g, p models ≤1600A
Removing the motorisation module from the Power Section
1
2
4
3
2a
ATyS r
3
ATyS r, d, t, g, p
2
1
2b
ATyS d, t, g, p
125 -> 630 A
800->1600A
REMOVAL / DÉMONTAGE / REMOCIÓNSTEP 1
1
4a 4b 5
ASSEMBLING / MONTAGE / MONTAJESTEP 2
81
91
84
94
82
92
(fast-on)
Pos II
Pos I
Pos I
Pos II
Pos II
2
2
3
4.4 lb-in
0,5 Nm
Pozidriv n°1
Pos I
Pos II
Pos I
Ref. 41090021
(1)
(1)
When mounting one auxiliary contact on
position I or II, use the short screws provided.
When mounting two auxiliary contacts on
position I or II, use the long screws provided.
Pos II
Ref. 15990532
(800-1600A)
Ref. 15990502
(125-630A)
Assembling the auxilliary contacts on the Power Section
1
ASSEMBLY DETAILS FOR 125 ->630 A / MONTAGE / MONTAJESTEP 2a
Pos. = Pos.
125->630A=3Nm
1 2 3a
ASSEMBLY DETAILS FOR 800 ->1600 A
Attn: drill right through before
inserting screws
800->1600A-5Nm
125->630A
Flying lead
and connectors
81
81
82
84
91
92
94
Pos I
Pos II
82
84
91
92
94
2x
max
1 2 3 4
9 10
5 76 8
81
81
82
84
91
92
94
Pos I
Pos II
82
84
91
92
94
2x
max
11
800->1600A-Fixedleadandconnectors
STEP 2b
Pos. = Pos.
Ref. 15990532 max. 2
Aux Contact per position
Ref. 15990502
max. 2 Aux Contact
per position
Pos I
Pos II
Pos I
Pos II
0.5 Nm
0.5 Nm
/