Avery Dennison 9906 Operating instructions

Avery Dennison
Brand
Avery Dennison
Model
9906
Type
Operating instructions

This manual is also suitable for

Avery Dennison 9906 Printer

The Avery Dennison 9906 Printer is a versatile and efficient printer designed for a wide range of labeling applications. With its innovative internal liner take-up feature, this printer allows for convenient and efficient label printing.

The internal liner take-up system collects the liner on a take-up reel located inside the printer's cover, eliminating the need for external liner rewinders. This feature is particularly useful for applications where space is limited or when continuous printing is required.

In addition to its liner take-up capabilities, the Avery Dennison 9906 Printer offers a variety of other features that enhance its usability and versatility. These include:

Avery Dennison 9906 Printer

The Avery Dennison 9906 Printer is a versatile and efficient printer designed for a wide range of labeling applications. With its innovative internal liner take-up feature, this printer allows for convenient and efficient label printing.

The internal liner take-up system collects the liner on a take-up reel located inside the printer's cover, eliminating the need for external liner rewinders. This feature is particularly useful for applications where space is limited or when continuous printing is required.

In addition to its liner take-up capabilities, the Avery Dennison 9906 Printer offers a variety of other features that enhance its usability and versatility. These include:

OPERATING INSTRUCTIONS
These instructions are for the Monarch® 9906 printer using the internal liner take-up option.
Internal Liner Take-Up
Internal liner take-up collects the liner on a take-up reel located inside the printer’s cover. This
feature must be used with peel mode. Refer to the 9906 Operator’s Handbook for additional
printer information.
1. Open the cover.
2. Unlock the printhead and lift the printhead
assembly until it locks into place.
3. Ope
n the printer’s exit cover.
4. Remove the labels from the first 18 inches of the
liner.
5. Remove the liner take-up bail.
6. Feed the liner over the peel bar and under the
peel roller.
Monarch is a registered trademark of Avery Dennison Corporation
TC9906LTOI Rev. AB 4/13 2010 Avery Dennison Corp. All rights reserved.
Peel Bar
7. Wra
p the liner around the liner take-up core in a
counter-clockwise direction.
Peel Roller
Liner Take-up Core
Liner Take-up Bail
Liner
Liner
2 Internal Liner Take-up Operating Instructions
8. Hold the liner while placing one end of the take-up bail in one of the grooves in the take-up
core. Gently rotate the bail counter-clockwise until the other end snaps into place in the
corresponding groove in the core.
Rest the bail in the bottom groove
and rotate it counter-clockwise as
shown.
9. Ge
ntly slide the bail all the way onto the core.
10
. Close the printhead assembly until you hear it click in to place.
11. Close the printer’s cover.
12. Close the exit cover.
13. Press FEED to position the supply under the printhead.
Removing a Full Liner Take-Up Roll
Remove the liner take-up when the printer alerts you of a full roll. The liner take-up reel holds
approximately half of a roll of supply.
1. Open the cover.
2. Turn the printhead retaining latch to unlock the printhead assembly.
3. Open the printer’s exit cover.
4. Gently pull the liner take-up bail off the liner take-up core.
5. Use scissors to cut the liner in front of the take-up reel.
Cut Liner Here
6. Re
move the liner from the take-up core.
7. Reload supply and continue printing.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Avery Dennison 9906 Operating instructions

Avery Dennison
Brand
Avery Dennison
Model
9906
Type
Operating instructions
This manual is also suitable for

Avery Dennison 9906 Printer

The Avery Dennison 9906 Printer is a versatile and efficient printer designed for a wide range of labeling applications. With its innovative internal liner take-up feature, this printer allows for convenient and efficient label printing.

The internal liner take-up system collects the liner on a take-up reel located inside the printer's cover, eliminating the need for external liner rewinders. This feature is particularly useful for applications where space is limited or when continuous printing is required.

In addition to its liner take-up capabilities, the Avery Dennison 9906 Printer offers a variety of other features that enhance its usability and versatility. These include:

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents