Identification:
Technical
Bulletin no:
Date:
Issuer:
Factory:
D02
CGX2007-04 (page 1 of 1), 1
st
ed.
12 March 2007
R. Sartor (DWS Customer Support)
DW Vallenoncello - Italy
Drops Slide & Panels in UC
Subject
Model
Undercounter double skin range (LS6E / WT30E).
Problem
Sometime leakage from door sides.
Reason
The plastic drops slide (introduced some years ago to collect condensed
steam) it’s stuck with silicon and it may be “waved”.
Action in
Factory
Since serial number 71100001 we have introduced a stainless steel drops
slide (always flat and fixed with spot welding to the side panel) instead of the
plastic drops slide 049362:
This solution is already in use since the production start in Utensils Washer (LU7 / WTU40)
and Undercounter double skin with water softener built-in (LS6EADPWS / WT38WS).
At the same time we have standardized control panels, top panels, side
panels and rear panels in the whole UC double skin range, all brands:
now all
LS6E / WT30E machines have same panels of LS6EADPWS (i.e. LS6E with
water softener built-in).
Therefore all UC double skin machines are 612 mm deep (machines without
water softener built-in change from 600 mm to 612 mm) and have the “flat” top
panel.
OLD NEW
Action in
Field
New panels are not interchangeable towards previous one unless to replace
all of them (see spare parts catalogue for more details about codes).
The stainless steel drops slide has not spare part code because it’s welded.
ELECTROLUX PROFESSIONAL SPA
MAILING ADDRESS TELEPHONE WEBSITE VAT NO.
VIA SEGALUZZA, 30
33170 PORDENONE - ITALY
++39 0434 380650 www.electrolux.com 00072220932
OFFICE ADDRESS TELEFAX E-MAIL ADDRESS
VIA SEGALUZZA, 30
33170 PORDENONE - ITALY
++39 0434 380636
++39 0434 385646
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Electrolux 727086 (RCDR4M26U) Datasheet
-
-
-
-
-
-
-
-
-