Atlas Metal Industries BLC-4-RM Datasheet

Brand
Atlas Metal Industries
Model
BLC-4-RM
Type
Datasheet

This manual is also suitable for

a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
MODULAR SERVING SYSTEMS
BL-9A
MOBILE COLD
SERVING UNIT
Refrigerated Cold Pan
with 3” Recessed Top
FEATURES
g
Attractive plastic laminate panels
g
Insulated refrigerated cold pan
g
Economical cost
g
Stainless steel adapter bars
g
Cam-Lock system
g
Classified NSF Standard 7 by UL
DESCRIPTION
Designed to keep salads, desserts and other chilled foods crisp and
appetizing. Your customers will see, taste and come back for the dif-
ference.
A wide range of attractive plastic laminate colors is available, or ure-
thane painted panels to blend with any decor.
Quality construction provides years of reliable service. Complete
reliability - use as an individual unit or joined in a continuous serv-
ing line with our exclusive “Cam-Lock” system.
c
BLC-2-RM
c
BLC-3-RM
c
BLC-4-RM
c
BLC-5-RM
c
BLC-6-RM
MODEL #BLC-4-RM
Shown with accessories
Tray Slide, Double Deck Display, Undershelf
Quantity Item No.
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
BL-10B
TOP: Constructed of 16 gauge, type 304 stainless
steel, die-formed, welded, ground and polished
to a uniform finish with rolled front edge.
BODY: Frame construction shall be of hi-tensile
square aluminum tubing, 1-1/4”, 1” and 3” extru-
ded, vertical radius corners. Frame sections are
all welded construction, ground and polished to a
uniform finish. Body is complete with front panel,
end panels and 8-5/8” rear apron of plastic lami-
nate on .050 aluminum. Owner to specify laminate
finish. The condensing unit enclosure is located to
the operator’s right. Cam-lock locking system
included with each unit to align and retain cart
positioning, when two or more units are joined.
REFRIGERATED COLD PAN: The cart is complete
and includes a RM series 3” recessed refrigerated
cold pan installed in the top. Constructed of 18
gauge, type 304 stainless steel,with raised perime-
ter bead and solid vinyl gasket. The pan is fully
insulated with high density polystyrene, 1” thick on
all sides, 2” thick on the bottom and enclosed by a
22 gauge galvanized steel outer liner.
The interior liner is fabricated with 1/4” radius
coved corners. The liner has copper tubing firm-
ly soldered to top 3" of all sides. A 3/4” dia. drain
with strainer, 4” PVC nipple, and valve is provid-
ed.
REFRIGERATION SYSTEM: The compressor hous-
ing shall be fabricated from formed angles and
bolted to the base of the unit. A fully self-contained
condensing unit is provided, with hermetically
sealed compressor and a thermostat control. The
system is fully charged with WC free refrigerant
and ready to operate.
ELECTRICAL: The unit will be wired for 15 amps.,
120 volt, single phase operation, with an on/off
thermostat switch and pilot light. A 6’ long, 3-wire
cord and plug (NEMA 5-15P) will be provided.
CASTERS: N.S.F approved, 5” diameter, non-
marking rubber tired, swivel plate caster with
grease fittings. Both casters on the operator’s
side have toe activated brakes.
Specifications subject to change without notice.
ACCESSORIES:
c4
Undershelves, full depth miidle and bot-
tom, stainless steel
c4
RPS - Rear Sliding Doors, stainless steel
c4
RPS - Door Locks
c4
RPS - Plastic Laminate Exterior
c4
Stainless Steel Legs with adjustable feet,
in lieu of casters
c4
Urethane painted panels (see color chart)
c4
Extended 5-year compressor warranty
c4
Remote compressor
c4
Condensate evaporator
c4
Remote switch
c
* For Additional Accessories see current
price guide
SPECIFICATIONS:
MOBILE COLD SERVING UNIT
Refrigerated Cold Pan
MODEL “A”
REFRIGERATED PAN
DIMENSIONS
ELECTRICAL
CHARACTERISTICS
BLC-2-RM 36-1/4” 25-5/8”L x 19-7/8”W x 9”D 6.0 amps. - 120 V - 1/4 HP
BLC-3-RM 50” 39-3/8”L x 19-7/8”W x 9”D 6.0 amps. - 120 V - 1/4 HP
BLC-4-RM 63-3/4” 53-1/8”L x 19-7/8”W x 9”D 7.8 amps. - 120 V - 1/3 HP
BLC-5-RM 77-1/2” 66-7/8”L x 19-7/8”W x 9”D 10.7 amps. - 120 V - 1/2 HP
BLC-6-RM 91-1/4” 80-5/8”L x 19-7/8”W x 9”D 10.7 amps. - 120 V - 1/2 HP
c
c
c
c
c
01/10-SC
30 1/2”
A
Plan View
35”
Rear Elevation
End View
3”
  • Page 1 1
  • Page 2 2

Atlas Metal Industries BLC-4-RM Datasheet

Brand
Atlas Metal Industries
Model
BLC-4-RM
Type
Datasheet
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents