Two-Piece Toilets
Two-Piece Toilets
ELONGATED FRONT TOILET
Models ❏ 1000EL.WHT and ❏ 1000EL.BON
❏ Bowl – White 1100EL.WHT
❏ Bowl – Bone 1100EL.BON
❏ Tank – White 120012.WHT
❏ Tank – Bone 120012.BON
Nominal Dimensions:
29-1/4" x 19-7/16" x 26-7/8"
(743 x 494 x 683mm)
C/L OF
OUTLET
FINISHED WALL
FINISHED
FLOOR
SUPPLY
AS
REQ’D
15"
(380mm)
1" ± 1/4"
(25mm ± 6mm)
27-1/4"
(692mm)
16-1/2"
(419mm)
C/L OF SEAT POST
HOLES 5-1/2"
(140MM) CENTERS
14"
(356mm)
3-1/4"
(83mm)
8"
(202mm)
26-7/8"
(683mm)
19-7/16"
(494mm)
9-5/8"
(245mm)
6"
(152mm)
10"
(254mm)
12"
(304mm)
12"
(304mm)
6-7/16"
(163mm)
16mm
(5/8)
*
C/L OF
OUTLET
FINISHED WALL
FINISHED
FLOOR
SUPPLY
AS
REQ’D
14-5/8"
(370mm)
1" ± 1/4"
(25mm ± 6mm)
29-1/4"
(743mm)
18-1/2"
(470mm)
C/L OF SEAT POST
HOLES 5-1/2"
(140MM) CENTERS
14"
(356mm)
3-1/4"
(83mm)
8"
(202mm)
12"
(304mm)
26-7/8"
(683mm)
19-7/16"
(494mm)
9-7/8"
(250mm)
6"
(152mm)
10"
(254mm)
12"
(304mm)
7"
(177mm)
16mm
(5/8)
*
• Close-coupled, two-piece toilet
• Fixture only, seat and supply by others
• Vitreous china
• 1.6 gallons (6 liters) of water per flush
• 12" (305mm) rough-in
• Available in Elongated and Round Front
• Siphon vortex bowl
• 14" (356mm) rim height
• Fully glazed 2" trapway
• 9" x 8-3/4" water surface area
• Two color-matched bowl caps
• One year limited warranty
ROUND FRONT TOILET
Models ❏ 1000RF.WHT and ❏ 1000RF.BON
❏ Bowl – White 1100RF.WHT
❏ Bowl – Bone 1100RF.BON
❏ Tank – White 120012.WHT
❏ Tank – Bone 120012.BON
Nominal Dimensions:
27-1/4" x 19-7/16" x 26-7/8"
(692 x 494 x 683mm)
To Be Specified:
Color:
❏
White
❏
Bone
❏
Supply with stop: _____________
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED. SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Compliance Certifications –
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures –
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
Revised 10/08
-
1
-
2
American Standard ChinaLUX 1000El.Bon User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
American Standard 4314.016 User manual
-
-
-
-
-
-
-
-
American Standard 738995-0020A User manual
-