Ariel 801A Below you will find brief product information for Ariel 801A—a device that has many capabilities to help you relax and enjoy your bathing experience. Some of the features include:
- Top shower: This feature provides a rainfall-like shower experience.
- Movable shower head: The shower head can be moved to different positions to provide a more customized showering experience.
- Cold/hot water switch: This switch allows you to easily adjust the water temperature to your desired level.
- Steam generator: This feature generates steam to create a spa-like experience in your bathroom.
Ariel 801A Below you will find brief product information for Ariel 801A—a device that has many capabilities to help you relax and enjoy your bathing experience. Some of the features include:
- Top shower: This feature provides a rainfall-like shower experience.
- Movable shower head: The shower head can be moved to different positions to provide a more customized showering experience.
- Cold/hot water switch: This switch allows you to easily adjust the water temperature to your desired level.
- Steam generator: This feature generates steam to create a spa-like experience in your bathroom.
Movable
shower head
Top shower
Nozzle
Nozzle
Steam generator
Foot
massage
Switch
valve
Cold/hot
water switch
Cold water connection
(blue pipe)
Hot water connection
(red pipe)
WS-801A
Do not dispose this product as unsorted municipal
waste. Collection of such waste separately for special
treatment is necessary.
Drawing of water connection
As the“ ”from the picture,please make the connection according to the serial number v1,v2,etc.
M 6×2 5
M 4×1 5
STEP5
STEP6
01
Dear Guest,
Thank you very much for purchasing our sanitary ware. To
enable you to use this product safely and effectively, please
read this installation and operation manual carefully before
use.
1.Please ensure that the product installed reliable electric leakage
protection device, the power plug contains earth line, and make sure
it is reliable earth line. Check the protect system of leakage
protection each time before use.
2.Do not turn on water pump, heat pump or air bubble pump without
water.
3.Before turn on water pump, check if the water level over jets 10 to
20 mm or not, make sure regular usage of water pump otherwise it
will be destroy because of water leakage.
4.People with Hypertension symptom, after drink or heart disease are
not allowed to use the bathtub. Children have a bath must under
adult's guidance.
5.During use please noticed that don't blocked the jets and avoiding
the air adjustment valve overflowing. Also keep the bathtub clean
and don't let it blocked by hair or mess.
6.During use, please firstly adjust the water temperature or it will be
burned.
7.The bathtub is designed with ergonomic, rise and fall changes are
quite big so during usage pay more attention of be slipped.
8.Please shut down the system when not to use.
CAUTIONS
TECHNIQUE PARAMETER
AC220V( ±10%)
50/60 H Z
0.1~0 . 2 M p a
3KW
Volt age
Freq uenc y
Water Volatge Power of steam generator
06
05
02
2
3
1 3
4
6
8
1 0
1 1
1 2
14
15
17
19
21
22
25
24
5
9
16
18
20
23
1
7
SKETCH
1.ozone
2.top shower
3.roof lamp
4.speaker
5.decorated lamp
6.waist-shaped board
7.movable arm
8.switch
9.cold/hot water
switch
10.handrail
11.nozzle
12.steam out
13.drainage
14.roof
15.mirror
16.exhaust fan
17.moveable shower
18.temperature sensor
19.decorated board
20.control panel
21.nozzle
22.seat
23.foot massage
24.room body
25.bottom
M4×15
Chain wheel of glass door
Plastic pad
STEP3
STEP4
03 04
INSTALLATION SKETCH
2
50
250
1250
Cold water pipe
1800
The socket
of power and
the socket
of telephone
Hot water pipe
1
50
Specification
M6x25
Chain wheel of glass door
Specification
SP4x15 SP4x25
SIZE:1060X1060X2160mm
1.The products should be installed by technical
guy who are got the certificate or those
technical who are assign by dealers. The main
power switch and electronic leakage device should
be installed.
2.The plug of electronic should be installed above
the steam generator and the length of electronic
wire not less then 1800MM from the earth.
3.There are should be with main power switch for
hot and cold water pipe of steam room and the
water pipe should be connect to drainage water
pipe.
4.Install the products according to the diagram of
installation When fixed the place for the products.
ILLUSTRATION OF INSTALLATION
INSTALLATION PROCESS
STEP1
STEP2
-
1
-
2
-
3
-
4
Ariel 801A Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ariel 801A Below you will find brief product information for Ariel 801A—a device that has many capabilities to help you relax and enjoy your bathing experience. Some of the features include:
- Top shower: This feature provides a rainfall-like shower experience.
- Movable shower head: The shower head can be moved to different positions to provide a more customized showering experience.
- Cold/hot water switch: This switch allows you to easily adjust the water temperature to your desired level.
- Steam generator: This feature generates steam to create a spa-like experience in your bathroom.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Ariel WS-807A Installation guide
-
-
-
-
-
Ariel WS-802L Installation guide
-
-
-
-
Ariel BT-150150 Installation guide
Other documents
-
Aquatic Industries 3760621-WH Installation guide
-
EAGO AM152ETL-5 User guide
-
Aston WT622.1J-AC-ABS-II-L Installation guide
-
-
-
-
-
-
Aquatic LuxeAir Series User manual
-
Insignia GT5000L Installation guide