Lenovo ThinkVision LT1423pwCA User manual

Brand: Lenovo

Model: ThinkVision LT1423pwCA

Type: User manual

Wide Touch Monitor

User's Guide

LT1423pwCA

Product numbers

60AC-UAR2-WW

First Edition (October 2013)

LENOVO products, data, computer software, and services have been developed exclusively at private

expense and are sold to governmental entities as commercial items as deﬁned by 48 C.F.R. 2.101 with

limited and restricted rights to use, reproduction and disclosure.

LIMITED AND RESTRICTED RIGHTS NOTICE: If products, data, computer software, or services are

delivered pursuant a General Services Administration "GSA" contract, use, reproduction, or disclosure is

subject to restrictions set forth in Contract No. GS-35F-05925.

Contents

Safty information iii

Chapter 1. Getting started 1-1

.............................................................................................

...........................................................................

Shipping contents ................................................................................................ 1-1

Product overview ................................................................................................. 1-2

Types of adjustments ....................................................................................... 1-2

User controls.................................................................................................... 1-2

LED indicator ................................................................................................... 1-4

Monitor Stylus Pen storage .............................................................................. 1-5

Cable lock slot ................................................................................................. 1-6

Setting up your monitor ........................................................................................ 1-6

Connecting and turning on your monitor .......................................................... 1-6

Using the Multi-touch screen .............................................................................. 1-10

Using the Monitor Stylus Pen ............................................................................. 1-10

Chapter 2. Adjusting and using your monitor .............................................2-1

.....................................................................................Comfort and accessibility 2-1

Arranging your work area ................................................................................. 2-1

Quick tips for healthy work habits ..................................................................... 2-2

Accessibility information ................................................................................... 2-2

Adjusting your monitor image ........................................................................... 2-3

Using the On-Screen Display (OSD) controls .................................................... 2-3

Understanding power management ..................................................................... 2-4

Caring for your monitor ......................................................................................... 2-4

Selecting a supported display mode ..................................................................... 2-5

Chapter 3. Reference information ...............................................................3-1

Monitor specifications ........................................................................................... 3-1

Troubleshooting .................................................................................................... 3-2

Getting further help .......................................................................................... 3-4

Service information ............................................................................................... 3-4

Chapter 4. Working with LT1423pwCA Wide WIFI monitor ........................ 4-1

Driver Installation .................................................................................................. 4-1

USB Monitor Display Information settings ........................................................... 4-10

Additional Information ......................................................................................... 4-14

Appendix A. Service and Support .............................................................. A-1

Telephone technical support ................................................................................. A-1

Appendix B. Notices ................................................................................... B-1

Recycling information ...........................................................................................B-1

Trademarks ..........................................................................................................B-2

Appendix C. USB WiFi adapter Statement ................................................ C-1

Appendix D. FR Statement ......................................................................... D-1

Safty information

General Safety guidelines

iii

Safety and Maintenance Guidelines

Important Safety Information

The power cord is designed for use with your monitor. To use a different cord, use only a power source and

connection compatible with this monitor.

CAUTION: To protect your monitor, as well as your computer, connect all power cords for your computer and

its peripheral devices (such as a monitor, printer, or scanner) to a surge protection device such as a power strip

with surge protection or uninterruptible power supply (UPS).

Not all power strips provide surge protection; the power strips must be specifically labeled as having this

ability. Use a power strip whose manufacturer offers a damage replacement policy, so you can replace your

equipment if surge protection fails.

CAUTION: A certified power supply cord has to be used with this equipment. The relevant national

installation and/or equipment regulations shall be considered. A certified power supply cord not lighter

than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation H05VV-F 3G 0.75mm²

or H05VVH2-F2 3G 0.75mm²) shall be used. Alternative a flexible cord be of synthetic rubber.

CAUTION: To prevent the monitor sliding out of the cover always carry as shown below.

Safety Precautions



To prevent electric shock, do not remove enclosure, no user-serviceable parts inside.



To protect your monitor, please do use this power adapter: PI Electronics (H.K) Ltd./ 51J0249.

Maintenance Guidelines

To enhance the performance and extend the life of your monitor:



Do not open your monitor cabinet or attempt to service this product yourself. If your monitor is not

operating properly or has been dropped or damaged, contact your Lenovo authorized dealer, reseller, or

service provider.



Adjust only those controls that are described in the operating instructions.



Turn your monitor off when not in use. You can substantially increase the life expectancy of the monitor by

using a screen saver program and turning off the monitor when not in use.



Keep your monitor in a well-ventilated area, away from excessive light, heat, or moisture.



Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked or

covered. Never push objects of any kind into cabinet slots or other openings.



Unplug the monitor from the power outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.



Do not drop the monitor or place it on an unstable surface.



When removing the monitor base, you must lay the monitor face down on a soft area to prevent it from

getting scratched, defaced, or broken.

The monitor is intended to be powered by the PC/Laptop USB3.0 output, and the PC/Laptop will be

IEC60950-1 approved, where the USB3.0 outputs comply with LPS requirement.

Cleaning the Monitor

The monitor is a high-quality optical device that requires special care when cleaning. To clean the monitor,

follow these steps:

1. Turn off the computer and the monitor.

2. Unplug your monitor from the power outlet before cleaning.

CAUTION: Do not use benzene, thinner, ammonia, or any volatile substance to clean the monitor screen or

cabinet. These chemicals may damage the monitor. Do not use liquid or aerosol cleaners. Never user water to

clean an LCD screen.

3. Wipe the screen with a dry, soft, clean cloth.

If the screen requires additional cleaning, use an antistatic screen cleaner.

4. Dust the monitor housing. Use a damp cloth to clean the cabinet.

If the cabinet requires additional cleaning, use a clean cloth dampened with isopropyl alcohol.

5. Plug in the monitor.

6. Turn on the monitor and the computer.

1-1

Chapter 1. Getting started

This User’s Guide contains detailed information on the ThinkVision

LT1423pwCA Wide

Touch Monitor. For a quick overview, please see the Setup Poster that was shipped with

your monitor.

Shipping contents

The product package should include the following items:

•

Information Flyer

•

Stylus Pen

•

USB Wifi adapter

•

USB Cable

•

Power Adaptor

•

Touch Monitor

•

Simple Cover

Product overview

This section will provide information on adjusting monitor positions, setting user

controls, and using the cable lock slot.

Types of adjustments

Tilt

Please see the illustration below for an example of the tilt range.

70°

12°

30°

By Kick-Stand By Simple Cover

User controls

How to use the power button

(If you connect the monitor with PC by USB cable, it will switch toUSB model

automatically, and the wireless module in the monitor will be shut down accordingly.)

1. Power on/off the wireless module.

1-2

LT1423pwCA Wide Touch Monitor User’s Guide

a) Hold the power button for 3 seconds to power on the monitor. After the completion

of the progress bar, the home page will display on screen. Then the monitor is ready

to be connected by WiFi.

b) Hold the power button for 3 seconds to power off the monitor when the monitor is

powered on, but not be connected.

c) Hold the power button for 5 seconds to active LT1423pwCA Control panel Options

page as below page, and the desired action can be selected.

d) If the power button is held for 10 seconds the LT1423pwCA will shut down even

when connected to the host system.

2. Power on/off the LCD panel’s backlight by clicking the power button when the

monitor is connected.

Chapter 1. Getting started

1-3

3. Your monitor has OSD control on the top of which is used to adjust the display.

With USB cable connection:

Menu Key: 1. To display the OSD menu on the screen.

2. To select the OSD sub-Menu.

Minus Key: 1. Back-Forward selection of the OSD menu.

2. Decease the value of sub-menu selection.

3. Auto config hot key.

Plus Key: 1. Forward selection of the OSD menu.

2. Increase the value of sub-menu selection.

After being prompted with successful Wi-Fi connection message:

Menu Key: Press to display the main menu of LT1423pwCA’s control panel.

Minus Key: Without any function assigned to it.

Plus Key: Press to rotate display screen.

LED indicator

1. Battery charge LED

When charging, the LED will be orange, and if the battery full-charged, the LED will

be green.

1-4

LT1423pwCA Wide Touch Monitor User’s Guide

2. Wifi LED

When connect by 2.4G, the LED will be blue, when 5G, LED will be amber.

Monitor Stylus Pen storage

A storage slot is available on the monitor to store the Stylus Pen.

Chapter 1. Getting started

1-5

Cable lock slot

Your monitor is equipped with a cable lock slot located on the side of your monitor

Setting up your monitor

This section provides information to help you set up your monitor.

Connecting and turning on your monitor

Note: The wireless interface to the monitor can be affected by the environment of the

location where it is being used, large objects, walls, etc can affect performance.

The wireless interface from the host PC to the LT1423pwCA monitor is fully

utilized and cannot be used for any other function like internet access.

If the host system uses wireless to connect to the internet, a separate wireless

interface device is required for the wireless monitor connection.

Depending on the configuration the integrated wireless adapter on the system

may give better performance with the LT1423pwCA monitor than the supplied

USB WiFi adapter.

To ensure the best wirele ss experience with LT1423pwCA the maximum

distance between the monitor and the host PC should be 8 metres.

1. Power on the computer.

1-6

LT1423pwCA Wide Touch Monitor User’s Guide

2. To install the monitor driver, follow the on-screen instructions.

a. Connect the USB cable to the USB port of the side of the monitor and the other

two ends to the appropriate USB ports on your computer.

b. To install the monitor driver, you can find the driver setup file in the monitor mass

storage USB disk. For detailed Setup steps, please see “Chapter 4”.

Remark:

a. To ensure optimal display performance, connect the monitor to your PC using a

USB3.0 and a USB 2.0 port at the same time. Using only one USB 2.0 port may

decrease the brightness level of the display.

b. At wireless display mode: If you connect the device to computer with USB cable,

the wireless display mode disabled automatically and switched to wired mode.

Disable the USB connection to enable the wireless display mode again.

3. Charging the battery

Your monitor is shipped with an AC adapter to charge your monitor from any

standard AC power outlet.

Note: The battery is not fully charged when shipped.

If a message is displayed indicating that the battery is less than 10% it is

recommended the monitor be shut down and the battery charged to maximize

battery life. your monitor’s battery need charge, please take the following actions:

a. Plug the AC adapter into a plug adaptor, then plug the plug adaptor into a

standard AC power outlet.

b. Disconnect the AC adapter from your monitor when the battery power is full, or

leave the AC adapter connected to operate from AC power.

Note: To remove connector, please refer to the picture (Part 2) for spliting

instructions.

Chapter 1. Getting started

1-7

Part 2

Part 1

4. How to use your USB Wifi adapter:

The attached USB WiFi adapter is an independent WiFi device for video connection

or network. Depending on the configuration, the integrated wireless adapter on

the system may give better performance with the LT1423pwCA monitor than the

supplied USB WiFi adapter.

1-8

LT1423pwCA Wide Touch Monitor User’s Guide

5. Using the cover

A cover is included with the monitor which provides protection when the monitor is

being carried or stored. The cover can also be used as a monitor stand as illustrated

below:

1) Attaching the cover

2) Using the cover as a monitor stand

a. Remove the monitor from the cover and lift the support feature.

b. Put monitor in front of stand leg.

Chapter 1. Getting started

1-9

Using the Multi-touch screen

Your Monitor support multi-touch function on Win7/Win8 32/64bits OS, can support

maximum ten point muti-touch function on Win 8 32/64bits OS.

Tap the screen to use the controls on the screen including icons, menu items, and the

on-screen keyboard.

Following provides instructions on how to use the multi-touch screen.

Tap

Tap gently on the screen with your fingertip to launch an application, select an item,

open a menu, orinput text using the onscreen keyboard.

Press and hold

Press and hold an object or a blank area on the screen until an action occurs.

Drag

To move an item such as an image and an icon on the screen, tap and hold your finger

on the item, moveyour finger to the desired location, and then take your finger off the

screen.

Swipe or slide

Move your finger in a vertical or horizontal direction on the screen to scroll through the

Start screen, Webpages, lists, picture thumbnails, and so on.

Zoom

•Zoomout:Movetwofingersclosetogetheronthescreenasifyouarepicking

something up to reducethe view of an image or a Web page.

•Zoomin:Movetwofingersapartonthescreentoenlargetheviewofanimageora

Web page.

Double-tap

For some applications, quickly tap twice on the screen to zoom in. Double-tap again to

zoom out.

Using the Monitor Stylus Pen

The LT1423pwCA supports touch pen functions on Win7 and Win8 (32 bit / 64 bit)

operating systems.

The Touch Stylus pen is linked to your monitor and you can use it to input text or draw

grahics as well as perform other operations without tapping the screen. It allows the

user to take notes on the screen, draw graphics when used with applications that

support editing and sketching.

The Monitor Stylus Pen consists of a tip A and a click button B. Hold the pen and point

the tip on the display to move the cursor .To make a selection (single click), tap the

display once with the pen. To double-click, tap twice withoutpausing. To do a right-

click, tap the display once and then hold the tip of the pen on the display; the right-click

icon appears. Pressing the click button to take a screen capture and snip the captured

image.

1-10

LT1423pwCA Wide Touch Monitor User’s Guide

Chapter 2. Adjusting and using your monitor

This section will give you information on adjusting and using your monitor.

Comfort and accessibility

Good ergonomic practice is important to get the most from your personal computer

and to avoid discomfort. Arrange your workplace and the equipment you use to suit

your individual needs and the kind of work that you perform. In addition, use healthy

work habits to maximize your performance and comfort while using your computer.

For more detailed information on any of these topics, visit the Healthy Computing Web

site at: http://www.lenovo.com/healthycomputing

Arranging your work area

Use a work surface of appropriate height and available working area to allow you to

work in comfort.

Organize you work area to match the way you use materials and equipment. Keep your

work area clean and clear for the materials that you typically use and place the items

that you use most frequently, such as the computer mouse or telephone, within the

easiest reach.

Equipment layout and setup play a large role in your working posture. The following

topics describe how to optimize equipment setup to achieve and maintain good

working posture.

Positioning and viewing your monitor

Position and adjust your computer monitor for comfortable viewing by considering the

following items:

•

Viewing distance: Optimal viewing distances for monitors range from approximately

510mm to 760mm (20 in to 30 in) and can vary depending on ambient light and time

of day. You can achieve different viewing distances by repositioning your monitor

or by modifying your posture or chair position. Use a viewing distance that is most

comfortable for you.

•

Monitor height: Position the monitor so your head and neck are in a comfortable

and neutral (vertical, or upright) position. If your monitor does not have height

adjustments, you have to place books or other sturdy objects under the base of

the monitor to achieve the desired height. A general guideline is to position the

monitor such that the top of the screen is lightly below your eye-height when you are

comfortably seated. However, be sure to optimize your monitor height so the line of

site between your eyes and the center the monitor suits your preferences for visual

distance and comfortable viewing when your eye muscles are in a relaxed stated.

•

Tilt: Adjust the tilt of your monitor to optimize the appearance of the screen content

and to accommodate your preferred head and neck posture.

•

General location: Position your monitor to avoid glare or reflections on the screen

from overhead lighting or nearby windows.

2-1

The following are some other tips for comfortable viewing of your monitor:

•

Use adequate lighting for the type of work you are performing.

•

Use the monitor brightness, contrast, and image adjustment controls, if equipped, to

optimize the image on your screen to meet your visual preferences.

•

Keep your monitor screen clean so you can focus on the screen’s contents.

Any concentrated and sustained visual activity can be tiring for your eyes. Be sure to

periodically look away from your monitor screen and focus on a far object to allow your

eye muscles to relax. If you have questions on eye fatigue or visual discomfort, consult

a vision care specialist for advice.

Quick tips for healthy work habits

The following information is the summary of some important factors to consider to help

you remain comfortable and productive when you use computer.

•

Good posture starts with equipment setup: The layout of your work area and the

setup of your computer equipment have a large effect on your posture when using

your computer. Be sure to optimize the position and orientation of your equipment

by following the tips outlined in “Arranging your work area” on page 2-1 so you can

maintain a comfortable and productive posture. Also, be sure to use the adjustment

capabilities of your computer components and office furniture to best suit your

preferences now and as your preferences change over time.

•

Minor changes in posture can help avoid discomfort: The longer you sit and

work in front of your computer, the more important it is to observe your working

posture. Avoid as summing any one posture for an extended period of time.

Periodically make minor modifications in your posture to help deter any discomforts

that might arise. Make use of any adjustments that your office furniture or equipment

provide to accommodate changes in posture

•

Short, periodic breaks help ensure healthy computing: Because computing is

primarily a static activity, it is particularly important to take short breaks from your

work. Periodically, stand up from your work area, stretch, walk for a drink of water,

or otherwise take a short break from using your computer. A short break from work

gives your body a welcome change in posture and helps to ensure you remain

comfortable and productive while you do work.

Accessibility information

Lenovo is committed to provide greater access to information and technology to people

with disabilities. With assistive technologies, users can access information in the way

most appropriate to their disability. Some of these technologies are already provided

in your operating system; others can be purchased through vendors or accessed at:

https://lenovo.ssbbartgroup.com/lenovo/request_vpat.php

2-2

LT1423pwCA Wide Touch Monitor User’s Guide

Adjusting your monitor image

This section describes the user control features used to adjust your monitor image.

Using the On-Screen Display (OSD) controls

The display settings can be viewed through the on-screen-display (OSD), as shown

below

USB video connection When WIFI is ready

To use the controls:

1. Press to open the main OSD menu. If wireless connection is made via the

LT1423pwCA control panel, and the display is normal, you can press the “ ”

button to turn on the OSD of LT1423pwCA control panel on the computer, and you

need to use the mouse to operate it. Please refer to Point 4 of “Wireless Using” in 4-9.

2. Use or to move across the icons. Select an icon and press to access that

function. Then use or to make adjustments, when you’re satisfied with the

settings, press to exit the current adjustment.

3. Press to exit from the OSD.

“ ” is hot key for adjust the image.

able 2-1. OSD functions

OSD Icon on

Main Menu

Description

Brightness

Adjusts overall brightness.

Note: In the wireless mode, if the LT1423pwCA device is not

connected through the LT1423pwCA control panel, and

the current brightness is 100, you can long press the +

key for ten seconds to enter the brightness enhancement

mode, to get 10-order brightness. The maximum brightness

is 110. This mode will be released when the USB cable is

connected or the brightness is adjusted to 100 or below.

Contrast

Adjusts difference between light and dark areas.

Automatic

Automatically optimizes the image.

Note: The function is activated during image displayed through

USB connection.

Option

Go to the options menu.

Channel

Adjust the monitor’s WIFI channel to match your WIFI adapter.

Note:

This function is only available when the monitor’s WIFI is

Ready to connect.

Exit

Exit from the OSD.

Chapter 2. Adjusting and using your monitor

2-3

OSD Icon on Option Menu Description

Language

This section lists the languages supported by your monitor

Note: The language chosen only affects the language of the OSD.

It has no effect on any software running on the computer.

When LT1423pwCA control panel is connected via WIFI,

the language setting of the monitor will be consistent with

the language of the computer system (which must be the

language supported by the monitor).

Button Repeat Rate

Change button repeat rate.

Menu time out

Change menu time out setting.

Reset OSD setting reset.

Return Return to the main menu.

Understanding power management

Power management is invoked when the computer goes to stand-by mode. The

monitor states are described below.

For optimal performance, unplug the USB cable and switch off your monitor by

monitor’s power key at the end of each working day, or whenever you expect to leave it

unused for long periods during the day.

Table 2-2. Power indicator of USB mode

State Power Indicator WIFI Indicator Screen

On Green Off Normal

Sleep Green Off Black

Off Off Off Black

Table 2-3. Power indicator of WIFI mode

State Power Indicator WIFI Indicator Screen

On Gr

een Blue/Amber

Normal

Sleep

een Blue/Amber

Black

ff O

ff Black

2-4

LT1423pwCA Wide Touch Monitor User’s Guide

Page is loading ...

Lenovo ThinkVision LT1423pwCA User manual

Lenovo ThinkVision LT1423pwCA User manual

Lenovo ThinkVision LT1423pwCA User manual

Related papers

Other documents