Netcomm NCT240 User manual

Category
Network switches
Type
User manual

This manual is also suitable for

Management User Guide
IP DSLAM
NetComm NCT240 Management Guide Release 1.0
Table of Content
1. INTRODUCTION..............................................................................................................................5
1.1 FEATURES........................................................................................................................................6
1.2 BASIC OPERATING INFORMATION .....................................................................................................7
1.2.1 Default username and Password.............................................................................................7
1.2.2 Default IP addresses................................................................................................................7
1.2.3 Default profile..........................................................................................................................7
2. CONFIGURING THE SWITCH BY WEB INTERFACE..............................................................8
2.1 SYSTEM ...........................................................................................................................................8
2.1.1 System Info...............................................................................................................................8
2.1.2 System log................................................................................................................................9
2.1.3 SNMP setup...........................................................................................................................10
2.1.4 General setup.........................................................................................................................10
2.1.5 Reboot....................................................................................................................................11
2.1.6 Synchronization with Time server (SNTP).............................................................................12
2.1.7 User Management..................................................................................................................12
2.1.8 Log out...................................................................................................................................12
2.1.9 Server services.......................................................................................................................13
2.1.10 Alarm...................................................................................................................................13
2.1.11 Daisy control........................................................................................................................13
2.1.12 Software upgrade and Configuration backup......................................................................14
2.2 ADSL............................................................................................................................................15
2.2.1 xDSL port setup.....................................................................................................................15
2.2.1.1 Map profile ............................................................................15
2.2.1.2 copy Settings to other ports.......................................................16
2.2.1.3 PVC Map (single and Multiple PVC setup).......................................16
2.2.1.4 PVC show ...............................................................................17
2.2.1.5 PVC delete .............................................................................17
2.2.2 Multiple port xDSL set up......................................................................................................18
2.2.3 xDSL profiles .........................................................................................................................19
2.2.3.1 Port profile ............................................................................19
2.2.3.2 VC profile ..............................................................................19
2.2.3.3 Alarm profile ..........................................................................20
2.2.3.4 Map alarm profile....................................................................20
2.2.4 Line Diagnostic – DELT........................................................................................................21
2.3 SWITCH .........................................................................................................................................21
2.3.1 VLAN.....................................................................................................................................21
1
NetComm NCT240 Management Guide Release 1.0
2.3.2 Ethernet Port Setting.............................................................................................................22
2.3.3 MAC management.................................................................................................................23
2.3.4 IGMP snooping......................................................................................................................24
2.3.5 Port authentication 802.1x ....................................................................................................24
2.3.6 Queue MAP ...........................................................................................................................25
2.3.7 DHCP relay – option 82........................................................................................................26
2.3.8 Loop test................................................................................................................................26
2.4 STATUS ..........................................................................................................................................26
2.4.1 Channel status.......................................................................................................................26
2.4.2 Line status..............................................................................................................................27
2.4.4 Line state ...............................................................................................................................27
2.5 IP...................................................................................................................................................28
2.5.1 IP setup..................................................................................................................................28
2.5.2 ARP table Display and flush..................................................................................................28
2.5.3 PING function........................................................................................................................29
2.5.4 VLAN (For management ) .....................................................................................................29
2.6 PERFORMANCE ..............................................................................................................................29
2.6.1 ADSL performance ................................................................................................................29
2.7 STATISTICS.....................................................................................................................................30
2.7.1 Gigabit Ethernet port counters..............................................................................................30
2.7.2 Utopia counter.......................................................................................................................30
2.7.3 VCC counter..........................................................................................................................30
2.7.4 Ether port counter .................................................................................................................31
2.7.5 Vcencap counter....................................................................................................................31
2.7.6 Excpetion counter..................................................................................................................31
2.8 CONFIGURATION............................................................................................................................32
2.8.1 Configuration save ................................................................................................................32
2.8.2 Restore...................................................................................................................................32
3. CONFIGURING NCT240 BY CLI INTERFACE.........................................................................33
LOG IN PROCESS..................................................................................................................................35
COMMAND FORMAT.............................................................................................................................37
SYSTEM:...........................................................................................................................................38
daisycontrol....................................................................................................................................38
Update............................................................................................................................................39
Info .................................................................................................................................................40
User................................................................................................................................................40
Reboot.............................................................................................................................................41
SNMP..............................................................................................................................................42
2
NetComm NCT240 Management Guide Release 1.0
Server..............................................................................................................................................42
Syslog..............................................................................................................................................43
Time ................................................................................................................................................44
Date................................................................................................................................................44
Timeserver......................................................................................................................................45
Alarm..............................................................................................................................................46
ADSL: ................................................................................................................................................47
Enable.............................................................................................................................................47
Disable............................................................................................................................................48
Profile.............................................................................................................................................49
Name...............................................................................................................................................49
Line diagnostic ...............................................................................................................................50
Vcprofile .........................................................................................................................................50
Alarmprofile....................................................................................................................................51
PVC ................................................................................................................................................51
STATUS:...............................................................................................................................................52
Chstatusget.....................................................................................................................................52
Linestatusget...................................................................................................................................53
Linestateget ....................................................................................................................................53
SWITCH:............................................................................................................................................54
Queuemap.......................................................................................................................................54
VLAN..............................................................................................................................................55
MAC ...............................................................................................................................................55
802.1x.............................................................................................................................................56
IGMP snooping ..............................................................................................................................56
DHCP relay, option 82 ...................................................................................................................57
Eth ..................................................................................................................................................57
Looptest..........................................................................................................................................58
IP:.......................................................................................................................................................58
show................................................................................................................................................58
Arp..................................................................................................................................................59
Set...................................................................................................................................................59
Gateway..........................................................................................................................................60
Route...............................................................................................................................................60
Ping ................................................................................................................................................60
STATISTICS: .....................................................................................................................................61
Adsl.................................................................................................................................................61
Ethuto.............................................................................................................................................62
3
NetComm NCT240 Management Guide Release 1.0
CONFIG:............................................................................................................................................62
Save ................................................................................................................................................63
Restore............................................................................................................................................63
4. TROUBLESHOOTING...................................................................................................................64
TROUBLESHOOTING GUIDE..................................................................................................................64
6. GLOSSARY......................................................................................................................................66
4
NetComm NCT240 Management Guide Release 1.0
1. Introduction
This document is intended for First Office Acceptance test plan for NetComm’s ADSL2+
Broadband Access Switch solution (BAS). The Netcomm NCT240 Broadband Access Switch
contains 24 ADSL2/2+ circuits to deliver high-speed data, video and voice service over
traditional twisted copper pairs by using DSL technology.
To meet the increasing demand for high-speed internet access and triple play application
services. The next generation network offers a feasible functionality of integrated services
with the most cost effective architecture. Next generation broadband access networks are
designed to provide rich video contents, DSL , POTS and VoIP services over traditional copper
wire infrastructure. These types of services will be supported on NGN architecture
simultaneously. DSL is used as the data service platform for traditional POTS technology
which is used for voice services. The multimedia and local content-rich applications can also
be easily implemented on this NGN architecture.
xDSL (Digital Subscriber Line) is a technology for delivering high-bandwidth information over
copper telephone lines. xDSL service can deliver POTS and high date rate services
simultaneously over a single twisted-wire pair. The POTS and data service are simultaneous
and independent; the xDSL data service does not affect the POTS service. xDSL uses the
bandwidth above the 4-kHz POTS frequency to transmit duplex data using digital modulation
techniques from the C.O side to the Customer Premises Equipment (CPE).
ADSL is a form of xDSL service that delivers an asymmetric data rate over a twisted copper
pair. ADSL delivers a higher rate downstream, towards the customer premises and lower rate
upstream, from the customer premises. ITU standard compliant Full-Rate ADSL2+ can deliver
data rates up to 25 Mbps downstream and 1 Mbps upstream; Full-Rate ADSL can deliver data
rates up to 8 Mbps downstream and 800 kbps upstream; G.Lite ADSL can deliver up to 1.5
Mbps downstream and 512 kbps upstream. The actual data rate depends on the length, gauge,
and condition of the twisted-wire pair, the bandwidth of the uplink depends on the data
network, and the capacity of the network service provider.
Digital Subscriber Line (DSL) dominates broadband market. The position of national telecom
operators in most countries has given the advantage in reaching out to customers with
broadband services over DSL.
5
NetComm NCT240 Management Guide Release 1.0
The NCT240 Access system contains 24 ADSL2/2+ circuits to deliver high-speed data service
over twisted copper pairs using industry standard Discrete Multi-Tone (DMT) line coding
technology. The NCT240 complies with full-rate ADSL in accordance with ANSI T1.413 Issue 2,
ITU-T G.992.1 (G.dmt), ITU-T G.992.2 (G.lite)ITU-T G.992.3 (ADSL2) and ITU G.992.5
(G.ADSL2+) protocols.
The NCT240 greatly expand broadband capabilities in the access network, enhancing the
infrastructure for emerging services. With simple in-service upgrades, service providers
obtain the capacity and Quality of Service (QoS) to support larger populations of narrowband
and broadband users. For management, NCT240 can be easily configured by SNMP, Telnet,
SSH, HTTP, HTTPS and RS-232 console.
1.1 Features
î‚„ Complete Intelligent L2 switch feature
î‚„ Intelligent DSL interworking feature
î‚‹ RFC2684 MpoA
î‚‹ VPN pass-through
î‚‹ RFC2516 PPPoE packet forwarding.
î‚„ Advanced L2+/higher layer protocol & policy control
î‚‹ GVRP/GARP/GMRP (IEEE 802.1q) (phase2)
î‚‹ STP/RSTP (IEEE 802.1d/w) (phase2)
î‚‹ IGMP Snooping
î‚‹ DHCP relay and relay agent option 82
î‚‹ Packet inspection and do policy control (filtering, forwarding..)
î‚„ Security of authentication mechanism and encryption
î‚‹ SSH/SSL
î‚„ Rich user interface for management including security
î‚‹ CLI/Telnet/SSH/SNMP/HTTP/S-HTTP
î‚„ Variety of uplink interface
î‚‹ SFP for 1000 Base-SX, LX, LHX and ZX.
î‚‹ RJ45 for 1000 Base-TX. (Default)
î‚„ Remote software upgrade
6
NetComm NCT240 Management Guide Release 1.0
1.2 Basic operating information
1.2.1 Default username and Password
Username: admin
Password: admin
1.2.2 Default IP addresses
MGMT : (Management Ethernet port ) – 192.168.1.1
UPLINKs : 192.168.0.1
1.2.3 Default profile
The NetComm NCT240 comes with the following default settings for all of the ADSL ports and
it is ready to use as a basic DSLAM out of the box.
VC Profile:
Name: default
Encapsulation: LLC
VPI: 8
VCI: 35
DSL Profile:
Mode: Auto, Annex A
Latency: interleave
Downstream Upstream
Minimum Data Rate 4000000 512000
Maximum Data Rate 26000000 1280000
Maximum Interleave Delay Downstream 0 0
Minimum Impulse Noise Protection 0 0
Target Noise Margin 50 50
Minimum Noise Margin
10 10
Maximum Noise Margin
310 310
7
NetComm NCT240 Management Guide Release 1.0
2. Configuring the Switch by Web Interface
Log in
2.1 System
2.1.1 System Info
This page displays the basic system information
8
NetComm NCT240 Management Guide Release 1.0
2.1.2 System log
When you enter to the syslog page the first function visible is enable and disable,
default is enabled.
There are three types of syslogs ,
1) Error log
2) Warning log
3) Message log
Show – display the syslog
Clean - The syslog can be cleaned using the syslog CLEAN option,
Config – shows the current configuration of the syslog and the syslog server IP
Syslog server IP also can be set using the same web page.
9
NetComm NCT240 Management Guide Release 1.0
2.1.3 SNMP setup
This page is for configuring the built in SNMP agent, NCT240 support SNMP V2c
SNMP set community:
SNMP get community:
SNMP trap community and the Trap receiver IP address
2.1.4 General setup
10
NetComm NCT240 Management Guide Release 1.0
Display and Edit General information
Host Name: NCT240 Host name
Location: NCT240 location
Contact Person’s Name: maintainer’s name
Model: NCT240 model
User Time Server When Bootup: Select time service protocol during bootup.
Time Server IP Address: IP address of Time server
Current Time: current time
New Time (hh:min:ss): enter new time in hh:mm:ss format
Current Date (yyy-mm-dd): enter current date in yyyy-mm-dd format
2.1.5 Reboot
Reboot the system (ALL the unsaved settings will be lost)
11
NetComm NCT240 Management Guide Release 1.0
2.1.6 Synchronization with Time server (SNTP)
2.1.7 User Management
Add, delete and Modify user information
2.1.8 Log out
12
NetComm NCT240 Management Guide Release 1.0
2.1.9 Server services
2.1.10 Alarm
This page is used for displaying current alarms and alarm history,
Display current alarms or Alarm history,
2.1.11 Daisy control
Please refer to the application note on Daisy control for more details
13
NetComm NCT240 Management Guide Release 1.0
2.1.12 Software upgrade and Configuration backup
Page for setting the FTP server settings
Page for selecting which file to upgrade
Page to back the files
14
NetComm NCT240 Management Guide Release 1.0
2.2 ADSL
2.2.1 xDSL port setup
Enable and Disable ADSL ports, map ADSL profiles to each port individually, copy
settings of one port to another port
2.2.1.1 Map profile
15
NetComm NCT240 Management Guide Release 1.0
Map ADSL profile, Alarm profile, ADSL mode (and the annex) to ADSL ports
2.2.1.2 copy Settings to other ports
2.2.1.3 PVC Map (single and Multiple PVC setup)
PVC can be set to a range of ports or to Individual ports using this page.
16
NetComm NCT240 Management Guide Release 1.0
2.2.1.4 PVC show
The PVC profile of an individual port or a range of ports can be displayed using this
page.
2.2.1.5 PVC delete
17
NetComm NCT240 Management Guide Release 1.0
2.2.2 Multiple port xDSL set up
This page is used for configuring several ports with the same configuration:
After selecting the ports, click on Apply:
18
NetComm NCT240 Management Guide Release 1.0
2.2.3 xDSL profiles
2.2.3.1 Port profile
ADSL profiles can be added and deleted using this page
2.2.3.2 VC profile
VC profile can be added using this page
19
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71

Netcomm NCT240 User manual

Category
Network switches
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI