IMPORTANT
This product should be installed by a competent person
and in accordance with the current IET Wiring Regulations.
If in doubt,consult a qualified electrician.
GENERAL INFORMATION
IMPORTANT
• Never look directly into the LED light source
• Do not place in water or other liquids
• Never operate with wet hands
• Never cover the fitting
• Never operate when the casing is open, or when the wiring
casing is missing or damaged, or when the diffuser is defective
• Never attempt to repair this unit yourself, there are no user
serviceable parts
• Never remove the diffuser
Installation Instructions for ‘Libra’ Range - LED Link Lights
Part Nos: Cool White - UCLED3CW, UCLED5CW,
UCLED8CW, UCLED14CW & UCLED16CW
Part Nos: Warm White - UCLED3WW, UCLED5WW,
UCLED8WW, UCLED14WW & UCLED16WW
INSTALLATION
1. Fixing holes must be clear of any obstruction (eg.cables)
between the mounting surface and fitting. The minimum
distance between the fitting and any adjacent flammable
surface is 10mm (as shown In Dia.1).
Dia.1
2. Select the type of brackets you need to use and mark off the
fixing points. If fixing to a shelf or under a cupboard check the
screw size required and screw into place. (see Dia.2).
Dia.2
Dia.3
3. Fittings may be butted (see Dia.3) together or with the optional
link lead (Part Codes: UC250LL -250mm, UC500LL - 500mm or
UC1000LL -1000mm). Note: - Max 10 connection.
LIBRA Ins May 18.qxp_Layout 1 24/05/2018 12:18 Page 1