Moen WICNT016G1USA, a smart sprinkler controller, automates your irrigation system, allowing you to control and customize your watering schedule from anywhere using your smartphone or tablet. With its user-friendly app, you can easily set watering schedules, adjust them based on real-time weather conditions, and monitor your water usage. The controller also features a compatibility with in-ground Moen Smart Wireless Soil Sensors (sold separately) that can help you save water by skipping scheduled watering when the soil moisture level is sufficient.
Moen WICNT016G1USA, a smart sprinkler controller, automates your irrigation system, allowing you to control and customize your watering schedule from anywhere using your smartphone or tablet. With its user-friendly app, you can easily set watering schedules, adjust them based on real-time weather conditions, and monitor your water usage. The controller also features a compatibility with in-ground Moen Smart Wireless Soil Sensors (sold separately) that can help you save water by skipping scheduled watering when the soil moisture level is sufficient.
Mount your Smart Sprinkler ControllerContents:
Requirements:
STEP 1BEFORE YOU BEGIN
Need help? We’ve got you covered.
STEP 2
Download the Moen Smart Water App
and create an account
You can find the Moen Smart Water App on the Apple App Store or the
Google Play Store. Once you’ve installed the App, create your account.
Scan to download the Moen Smart Water App
on your iOS or Android device.
USA / CA: 1-844-633-8356
Mexico: 01-800-718-4345
Visit our customer support and service website
moen.com/contact
Learn more about Moen’s smart water products,
including FAQs on this product: moen.com/smart-home
Wi-Fi
®
2.4 GHz
Magnetic
faceplate
Screws x3
Anchors x3
Power adapter Wire label
stickers
Smart Sprinkler
Controller
Screwdrivers:
Phillips and ⁄" flathead
Smartphone
or tablet
Level
*optional
30 minutes
to set-up
Plug in the AC power adapter and add your
Smart Sprinkler Controller to your account
Open the Moen Smart Water App and tap at the top of your homepage.
Follow the prompts in the App to add your Smart Sprinkler Controller to your
account if you have not already done so.
Once your Smart Sprinkler Controller is online, the light bar at the top of the
controller will light up green. You can now attach the magnetic faceplate.
Complete set-up in the Moen
Smart Water App
Now that the controller is online, use the Moen Smart Water App
to customize your zones and create schedules.
STEP 3
Before installation:
Further enhance your watering with
the Moen Smart Wireless Soil Sensor
*
Test your existing system to ensure
sprinklers are working properly.
Photograph the wiring inside
your existing controller to
reference during installation.
2. Test sprinklers
Give us a call Customer support
For safety, unplug your
sprinkler system.
3. Turn off power
Place matching wire labels on
existing wires before uninstalling
the old controller.
5. Wire label stickers
4. Photograph wiring
Plug in Moen Smart Sprinkler Controller at
the installation location and follow the
prompts in the Moen Smart Water app to
register the device to your account.
Verify that your network signal is strong
enough to reach the controller. Make sure
your controller is able to connect before
proceeding with the installation.
1. Test your signal strength
Unplug and remove your existing
controller from the wall.
6. Remove existing controller
STEP 4
Connect your wires
While referencing the photo of your previous wiring and/or the applied
wire labels, insert the wires into the appropriate terminals.
# 1-16
AC
C/COM/VC
MV
Zone numbers
Power for accessories
Common wire
Master valve
F+
F-
SN
Flow meter (positive)
Flow meter (negative)
Wired rain sensors
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16AC C/COM MV SN SN F+ F-
Automatically skips
schedules
Only water when your
soil needs it
Custom watering
routines
Create custom watering routines based
on each zone's varying moisture needs
Know your controller
Power your controller on by connecting the AC power adapter
and plugging it into an outlet.
Pair your Smart Sprinkler Controller with our
in-ground Smart Wireless Soil Sensors.
Automatically skip schedules when your soil
moisture is above set thresholds so you never have
to worry about over-watering again. We recommend
one Smart Wireless Soil Sensor per zone.
App Store is a service mark of Apple Inc. | Google Play and the Google Play logo are trademarks of Google LLC.
© 2023 Moen Incorporated. All rights reserved. QSG00021 | W23-0212
Online
Running
Setup
Offline
Reset
Power
adapter input
Connector
has no function
Light bar
Smart Sprinkler Controller
WICNT016G1USA and WICNT008G1USA
Quick Start Guide
1. Position
Remove your Smart Sprinkler Controller’s
magnetic faceplace. Use the provided anchors if
screwing directly into drywall. Screw one of the
provided screws into the wall. The Smart
Sprinkler Controller will sit ½" higher than the
position of this screw. Leave ¼" of the screw
head away from the wall.
Hang your Smart Sprinkler Controller on
the screw from the top hole on the back
of the device.
2. Attach
STEP 6STEP 5
¼"
4. Secure
Use a level to level your Smart Sprinkler
Controller on the wall.
3. Level (optional)
Mark location for bottom anchors and screws.
Screw the last two provided screws into the
bottom two holes into the wall.
*Sold separately
30
Moen Artwork Information:
Designer: Mike Satira | mik[email protected]
Native Artwork Created With: Adobe Illustrator 2022
Supplier originally printing this package: Winglee 2657
Project Number: 6396
Internal Job Number: W23-0212
Ink: 4C Process + 1 PMS Color
Color Standard
MOEN SMART WATER BLUE
(PMS 533)
Print Vendor:
Match to Pantone
Chip PMS 533
Mount your Smart Sprinkler ControllerContents:
Requirements:
STEP 1BEFORE YOU BEGIN
Need help? We’ve got you covered.
STEP 2
Download the Moen Smart Water App
and create an account
You can find the Moen Smart Water App on the Apple App Store or the
Google Play Store. Once you’ve installed the App, create your account.
Scan to download the Moen Smart Water App
on your iOS or Android device.
USA / CA: 1-844-633-8356
Mexico: 01-800-718-4345
Visit our customer support and service website
moen.com/contact
Learn more about Moen’s smart water products,
including FAQs on this product: moen.com/smart-home
Wi-Fi
®
2.4 GHz
Magnetic
faceplate
Screws x3
Anchors x3
Power adapter Wire label
stickers
Smart Sprinkler
Controller
Screwdrivers:
Phillips and ⁄" flathead
Smartphone
or tablet
Level
*optional
30 minutes
to set-up
Plug in the AC power adapter and add your
Smart Sprinkler Controller to your account
Open the Moen Smart Water App and tap at the top of your homepage.
Follow the prompts in the App to add your Smart Sprinkler Controller to your
account if you have not already done so.
Once your Smart Sprinkler Controller is online, the light bar at the top of the
controller will light up green. You can now attach the magnetic faceplate.
Complete set-up in the Moen
Smart Water App
Now that the controller is online, use the Moen Smart Water App
to customize your zones and create schedules.
STEP 3
Before installation:
Further enhance your watering with
the Moen Smart Wireless Soil Sensor
*
Test your existing system to ensure
sprinklers are working properly.
Photograph the wiring inside
your existing controller to
reference during installation.
2. Test sprinklers
Give us a call Customer support
For safety, unplug your
sprinkler system.
3. Turn off power
Place matching wire labels on
existing wires before uninstalling
the old controller.
5. Wire label stickers
4. Photograph wiring
Plug in Moen Smart Sprinkler Controller at
the installation location and follow the
prompts in the Moen Smart Water app to
register the device to your account.
Verify that your network signal is strong
enough to reach the controller. Make sure
your controller is able to connect before
proceeding with the installation.
1. Test your signal strength
Unplug and remove your existing
controller from the wall.
6. Remove existing controller
STEP 4
Connect your wires
While referencing the photo of your previous wiring and/or the applied
wire labels, insert the wires into the appropriate terminals.
# 1-16
AC
C/COM/VC
MV
Zone numbers
Power for accessories
Common wire
Master valve
F+
F-
SN
Flow meter (positive)
Flow meter (negative)
Wired rain sensors
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16AC C/COM MV SN SN F+ F-
Automatically skips
schedules
Only water when your
soil needs it
Custom watering
routines
Create custom watering routines based
on each zone's varying moisture needs
Know your controller
Power your controller on by connecting the AC power adapter
and plugging it into an outlet.
Pair your Smart Sprinkler Controller with our
in-ground Smart Wireless Soil Sensors.
Automatically skip schedules when your soil
moisture is above set thresholds so you never have
to worry about over-watering again. We recommend
one Smart Wireless Soil Sensor per zone.
App Store is a service mark of Apple Inc. | Google Play and the Google Play logo are trademarks of Google LLC.
© 2023 Moen Incorporated. All rights reserved. QSG00021 | W23-0212
Online
Running
Setup
Offline
Reset
Power
adapter input
Connector
has no function
Light bar
Smart Sprinkler Controller
WICNT016G1USA and WICNT008G1USA
Quick Start Guide
1. Position
Remove your Smart Sprinkler Controller’s
magnetic faceplace. Use the provided anchors if
screwing directly into drywall. Screw one of the
provided screws into the wall. The Smart
Sprinkler Controller will sit ½" higher than the
position of this screw. Leave ¼" of the screw
head away from the wall.
Hang your Smart Sprinkler Controller on
the screw from the top hole on the back
of the device.
2. Attach
STEP 6STEP 5
¼"
4. Secure
Use a level to level your Smart Sprinkler
Controller on the wall.
3. Level (optional)
Mark location for bottom anchors and screws.
Screw the last two provided screws into the
bottom two holes into the wall.
*Sold separately
30
Moen Artwork Information:
Designer: Mike Satira | mik[email protected]
Native Artwork Created With: Adobe Illustrator 2022
Supplier originally printing this package: Winglee 2657
Project Number: 6396
Internal Job Number: W23-0212
Ink: 4C Process + 1 PMS Color
Color Standard
MOEN SMART WATER BLUE
(PMS 533)
Print Vendor:
Match to Pantone
Chip PMS 533
Mount your Smart Sprinkler ControllerContents:
Requirements:
STEP 1BEFORE YOU BEGIN
Need help? We’ve got you covered.
STEP 2
Download the Moen Smart Water App
and create an account
You can find the Moen Smart Water App on the Apple App Store or the
Google Play Store. Once you’ve installed the App, create your account.
Scan to download the Moen Smart Water App
on your iOS or Android device.
USA / CA: 1-844-633-8356
Mexico: 01-800-718-4345
Visit our customer support and service website
moen.com/contact
Learn more about Moen’s smart water products,
including FAQs on this product: moen.com/smart-home
Wi-Fi
®
2.4 GHz
Magnetic
faceplate
Screws x3
Anchors x3
Power adapter Wire label
stickers
Smart Sprinkler
Controller
Screwdrivers:
Phillips and ⁄" flathead
Smartphone
or tablet
Level
*optional
30 minutes
to set-up
Plug in the AC power adapter and add your
Smart Sprinkler Controller to your account
Open the Moen Smart Water App and tap at the top of your homepage.
Follow the prompts in the App to add your Smart Sprinkler Controller to your
account if you have not already done so.
Once your Smart Sprinkler Controller is online, the light bar at the top of the
controller will light up green. You can now attach the magnetic faceplate.
Complete set-up in the Moen
Smart Water App
Now that the controller is online, use the Moen Smart Water App
to customize your zones and create schedules.
STEP 3
Before installation:
Further enhance your watering with
the Moen Smart Wireless Soil Sensor
*
Test your existing system to ensure
sprinklers are working properly.
Photograph the wiring inside
your existing controller to
reference during installation.
2. Test sprinklers
Give us a call Customer support
For safety, unplug your
sprinkler system.
3. Turn off power
Place matching wire labels on
existing wires before uninstalling
the old controller.
5. Wire label stickers
4. Photograph wiring
Plug in Moen Smart Sprinkler Controller at
the installation location and follow the
prompts in the Moen Smart Water app to
register the device to your account.
Verify that your network signal is strong
enough to reach the controller. Make sure
your controller is able to connect before
proceeding with the installation.
1. Test your signal strength
Unplug and remove your existing
controller from the wall.
6. Remove existing controller
STEP 4
Connect your wires
While referencing the photo of your previous wiring and/or the applied
wire labels, insert the wires into the appropriate terminals.
# 1-16
AC
C/COM/VC
MV
Zone numbers
Power for accessories
Common wire
Master valve
F+
F-
SN
Flow meter (positive)
Flow meter (negative)
Wired rain sensors
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16AC C/COM MV SN SN F+ F-
Automatically skips
schedules
Only water when your
soil needs it
Custom watering
routines
Create custom watering routines based
on each zone's varying moisture needs
Know your controller
Power your controller on by connecting the AC power adapter
and plugging it into an outlet.
Pair your Smart Sprinkler Controller with our
in-ground Smart Wireless Soil Sensors.
Automatically skip schedules when your soil
moisture is above set thresholds so you never have
to worry about over-watering again. We recommend
one Smart Wireless Soil Sensor per zone.
App Store is a service mark of Apple Inc. | Google Play and the Google Play logo are trademarks of Google LLC.
© 2023 Moen Incorporated. All rights reserved. QSG00021 | W23-0212
Online
Running
Setup
Offline
Reset
Power
adapter input
Connector
has no function
Light bar
Smart Sprinkler Controller
WICNT016G1USA and WICNT008G1USA
Quick Start Guide
1. Position
Remove your Smart Sprinkler Controller’s
magnetic faceplace. Use the provided anchors if
screwing directly into drywall. Screw one of the
provided screws into the wall. The Smart
Sprinkler Controller will sit ½" higher than the
position of this screw. Leave ¼" of the screw
head away from the wall.
Hang your Smart Sprinkler Controller on
the screw from the top hole on the back
of the device.
2. Attach
STEP 6STEP 5
¼"
4. Secure
Use a level to level your Smart Sprinkler
Controller on the wall.
3. Level (optional)
Mark location for bottom anchors and screws.
Screw the last two provided screws into the
bottom two holes into the wall.
*Sold separately
30
Moen Artwork Information:
Designer: Mike Satira | mik[email protected]
Native Artwork Created With: Adobe Illustrator 2022
Supplier originally printing this package: Winglee 2657
Project Number: 6396
Internal Job Number: W23-0212
Ink: 4C Process + 1 PMS Color
Color Standard
MOEN SMART WATER BLUE
(PMS 533)
Print Vendor:
Match to Pantone
Chip PMS 533
Mount your Smart Sprinkler ControllerContents:
Requirements:
STEP 1BEFORE YOU BEGIN
Need help? We’ve got you covered.
STEP 2
Download the Moen Smart Water App
and create an account
You can find the Moen Smart Water App on the Apple App Store or the
Google Play Store. Once you’ve installed the App, create your account.
Scan to download the Moen Smart Water App
on your iOS or Android device.
USA / CA: 1-844-633-8356
Mexico: 01-800-718-4345
Visit our customer support and service website
moen.com/contact
Learn more about Moen’s smart water products,
including FAQs on this product: moen.com/smart-home
Wi-Fi
®
2.4 GHz
Magnetic
faceplate
Screws x3
Anchors x3
Power adapter Wire label
stickers
Smart Sprinkler
Controller
Screwdrivers:
Phillips and ⁄" flathead
Smartphone
or tablet
Level
*optional
30 minutes
to set-up
Plug in the AC power adapter and add your
Smart Sprinkler Controller to your account
Open the Moen Smart Water App and tap at the top of your homepage.
Follow the prompts in the App to add your Smart Sprinkler Controller to your
account if you have not already done so.
Once your Smart Sprinkler Controller is online, the light bar at the top of the
controller will light up green. You can now attach the magnetic faceplate.
Complete set-up in the Moen
Smart Water App
Now that the controller is online, use the Moen Smart Water App
to customize your zones and create schedules.
STEP 3
Before installation:
Further enhance your watering with
the Moen Smart Wireless Soil Sensor
*
Test your existing system to ensure
sprinklers are working properly.
Photograph the wiring inside
your existing controller to
reference during installation.
2. Test sprinklers
Give us a call Customer support
For safety, unplug your
sprinkler system.
3. Turn off power
Place matching wire labels on
existing wires before uninstalling
the old controller.
5. Wire label stickers
4. Photograph wiring
Plug in Moen Smart Sprinkler Controller at
the installation location and follow the
prompts in the Moen Smart Water app to
register the device to your account.
Verify that your network signal is strong
enough to reach the controller. Make sure
your controller is able to connect before
proceeding with the installation.
1. Test your signal strength
Unplug and remove your existing
controller from the wall.
6. Remove existing controller
STEP 4
Connect your wires
While referencing the photo of your previous wiring and/or the applied
wire labels, insert the wires into the appropriate terminals.
# 1-16
AC
C/COM/VC
MV
Zone numbers
Power for accessories
Common wire
Master valve
F+
F-
SN
Flow meter (positive)
Flow meter (negative)
Wired rain sensors
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16AC C/COM MV SN SN F+ F-
Automatically skips
schedules
Only water when your
soil needs it
Custom watering
routines
Create custom watering routines based
on each zone's varying moisture needs
Know your controller
Power your controller on by connecting the AC power adapter
and plugging it into an outlet.
Pair your Smart Sprinkler Controller with our
in-ground Smart Wireless Soil Sensors.
Automatically skip schedules when your soil
moisture is above set thresholds so you never have
to worry about over-watering again. We recommend
one Smart Wireless Soil Sensor per zone.
App Store is a service mark of Apple Inc. | Google Play and the Google Play logo are trademarks of Google LLC.
© 2023 Moen Incorporated. All rights reserved. QSG00021 | W23-0212
Online
Running
Setup
Offline
Reset
Power
adapter input
Connector
has no function
Light bar
Smart Sprinkler Controller
WICNT016G1USA and WICNT008G1USA
Quick Start Guide
1. Position
Remove your Smart Sprinkler Controller’s
magnetic faceplace. Use the provided anchors if
screwing directly into drywall. Screw one of the
provided screws into the wall. The Smart
Sprinkler Controller will sit ½" higher than the
position of this screw. Leave ¼" of the screw
head away from the wall.
Hang your Smart Sprinkler Controller on
the screw from the top hole on the back
of the device.
2. Attach
STEP 6STEP 5
¼"
4. Secure
Use a level to level your Smart Sprinkler
Controller on the wall.
3. Level (optional)
Mark location for bottom anchors and screws.
Screw the last two provided screws into the
bottom two holes into the wall.
*Sold separately
30
Moen Artwork Information:
Designer: Mike Satira | mik[email protected]
Native Artwork Created With: Adobe Illustrator 2022
Supplier originally printing this package: Winglee 2657
Project Number: 6396
Internal Job Number: W23-0212
Ink: 4C Process + 1 PMS Color
Color Standard
MOEN SMART WATER BLUE
(PMS 533)
Print Vendor:
Match to Pantone
Chip PMS 533
Mount your Smart Sprinkler ControllerContents:
Requirements:
STEP 1BEFORE YOU BEGIN
Need help? We’ve got you covered.
STEP 2
Download the Moen Smart Water App
and create an account
You can find the Moen Smart Water App on the Apple App Store or the
Google Play Store. Once you’ve installed the App, create your account.
Scan to download the Moen Smart Water App
on your iOS or Android device.
USA / CA: 1-844-633-8356
Mexico: 01-800-718-4345
Visit our customer support and service website
moen.com/contact
Learn more about Moen’s smart water products,
including FAQs on this product: moen.com/smart-home
Wi-Fi
®
2.4 GHz
Magnetic
faceplate
Screws x3
Anchors x3
Power adapter Wire label
stickers
Smart Sprinkler
Controller
Screwdrivers:
Phillips and ⁄" flathead
Smartphone
or tablet
Level
*optional
30 minutes
to set-up
Plug in the AC power adapter and add your
Smart Sprinkler Controller to your account
Open the Moen Smart Water App and tap at the top of your homepage.
Follow the prompts in the App to add your Smart Sprinkler Controller to your
account if you have not already done so.
Once your Smart Sprinkler Controller is online, the light bar at the top of the
controller will light up green. You can now attach the magnetic faceplate.
Complete set-up in the Moen
Smart Water App
Now that the controller is online, use the Moen Smart Water App
to customize your zones and create schedules.
STEP 3
Before installation:
Further enhance your watering with
the Moen Smart Wireless Soil Sensor
*
Test your existing system to ensure
sprinklers are working properly.
Photograph the wiring inside
your existing controller to
reference during installation.
2. Test sprinklers
Give us a call Customer support
For safety, unplug your
sprinkler system.
3. Turn off power
Place matching wire labels on
existing wires before uninstalling
the old controller.
5. Wire label stickers
4. Photograph wiring
Plug in Moen Smart Sprinkler Controller at
the installation location and follow the
prompts in the Moen Smart Water app to
register the device to your account.
Verify that your network signal is strong
enough to reach the controller. Make sure
your controller is able to connect before
proceeding with the installation.
1. Test your signal strength
Unplug and remove your existing
controller from the wall.
6. Remove existing controller
STEP 4
Connect your wires
While referencing the photo of your previous wiring and/or the applied
wire labels, insert the wires into the appropriate terminals.
# 1-16
AC
C/COM/VC
MV
Zone numbers
Power for accessories
Common wire
Master valve
F+
F-
SN
Flow meter (positive)
Flow meter (negative)
Wired rain sensors
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16AC C/COM MV SN SN F+ F-
Automatically skips
schedules
Only water when your
soil needs it
Custom watering
routines
Create custom watering routines based
on each zone's varying moisture needs
Know your controller
Power your controller on by connecting the AC power adapter
and plugging it into an outlet.
Pair your Smart Sprinkler Controller with our
in-ground Smart Wireless Soil Sensors.
Automatically skip schedules when your soil
moisture is above set thresholds so you never have
to worry about over-watering again. We recommend
one Smart Wireless Soil Sensor per zone.
App Store is a service mark of Apple Inc. | Google Play and the Google Play logo are trademarks of Google LLC.
© 2023 Moen Incorporated. All rights reserved. QSG00021 | W23-0212
Online
Running
Setup
Offline
Reset
Power
adapter input
Connector
has no function
Light bar
Smart Sprinkler Controller
WICNT016G1USA and WICNT008G1USA
Quick Start Guide
1. Position
Remove your Smart Sprinkler Controller’s
magnetic faceplace. Use the provided anchors if
screwing directly into drywall. Screw one of the
provided screws into the wall. The Smart
Sprinkler Controller will sit ½" higher than the
position of this screw. Leave ¼" of the screw
head away from the wall.
Hang your Smart Sprinkler Controller on
the screw from the top hole on the back
of the device.
2. Attach
STEP 6STEP 5
¼"
4. Secure
Use a level to level your Smart Sprinkler
Controller on the wall.
3. Level (optional)
Mark location for bottom anchors and screws.
Screw the last two provided screws into the
bottom two holes into the wall.
*Sold separately
30
Moen Artwork Information:
Designer: Mike Satira | mik[email protected]
Native Artwork Created With: Adobe Illustrator 2022
Supplier originally printing this package: Winglee 2657
Project Number: 6396
Internal Job Number: W23-0212
Ink: 4C Process + 1 PMS Color
Color Standard
MOEN SMART WATER BLUE
(PMS 533)
Print Vendor:
Match to Pantone
Chip PMS 533
Mount your Smart Sprinkler ControllerContents:
Requirements:
STEP 1BEFORE YOU BEGIN
Need help? We’ve got you covered.
STEP 2
Download the Moen Smart Water App
and create an account
You can find the Moen Smart Water App on the Apple App Store or the
Google Play Store. Once you’ve installed the App, create your account.
Scan to download the Moen Smart Water App
on your iOS or Android device.
USA / CA: 1-844-633-8356
Mexico: 01-800-718-4345
Visit our customer support and service website
moen.com/contact
Learn more about Moen’s smart water products,
including FAQs on this product: moen.com/smart-home
Wi-Fi
®
2.4 GHz
Magnetic
faceplate
Screws x3
Anchors x3
Power adapter Wire label
stickers
Smart Sprinkler
Controller
Screwdrivers:
Phillips and ⁄" flathead
Smartphone
or tablet
Level
*optional
30 minutes
to set-up
Plug in the AC power adapter and add your
Smart Sprinkler Controller to your account
Open the Moen Smart Water App and tap at the top of your homepage.
Follow the prompts in the App to add your Smart Sprinkler Controller to your
account if you have not already done so.
Once your Smart Sprinkler Controller is online, the light bar at the top of the
controller will light up green. You can now attach the magnetic faceplate.
Complete set-up in the Moen
Smart Water App
Now that the controller is online, use the Moen Smart Water App
to customize your zones and create schedules.
STEP 3
Before installation:
Further enhance your watering with
the Moen Smart Wireless Soil Sensor
*
Test your existing system to ensure
sprinklers are working properly.
Photograph the wiring inside
your existing controller to
reference during installation.
2. Test sprinklers
Give us a call Customer support
For safety, unplug your
sprinkler system.
3. Turn off power
Place matching wire labels on
existing wires before uninstalling
the old controller.
5. Wire label stickers
4. Photograph wiring
Plug in Moen Smart Sprinkler Controller at
the installation location and follow the
prompts in the Moen Smart Water app to
register the device to your account.
Verify that your network signal is strong
enough to reach the controller. Make sure
your controller is able to connect before
proceeding with the installation.
1. Test your signal strength
Unplug and remove your existing
controller from the wall.
6. Remove existing controller
STEP 4
Connect your wires
While referencing the photo of your previous wiring and/or the applied
wire labels, insert the wires into the appropriate terminals.
# 1-16
AC
C/COM/VC
MV
Zone numbers
Power for accessories
Common wire
Master valve
F+
F-
SN
Flow meter (positive)
Flow meter (negative)
Wired rain sensors
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16AC C/COM MV SN SN F+ F-
Automatically skips
schedules
Only water when your
soil needs it
Custom watering
routines
Create custom watering routines based
on each zone's varying moisture needs
Know your controller
Power your controller on by connecting the AC power adapter
and plugging it into an outlet.
Pair your Smart Sprinkler Controller with our
in-ground Smart Wireless Soil Sensors.
Automatically skip schedules when your soil
moisture is above set thresholds so you never have
to worry about over-watering again. We recommend
one Smart Wireless Soil Sensor per zone.
App Store is a service mark of Apple Inc. | Google Play and the Google Play logo are trademarks of Google LLC.
© 2023 Moen Incorporated. All rights reserved. QSG00021 | W23-0212
Online
Running
Setup
Offline
Reset
Power
adapter input
Connector
has no function
Light bar
Smart Sprinkler Controller
WICNT016G1USA and WICNT008G1USA
Quick Start Guide
1. Position
Remove your Smart Sprinkler Controller’s
magnetic faceplace. Use the provided anchors if
screwing directly into drywall. Screw one of the
provided screws into the wall. The Smart
Sprinkler Controller will sit ½" higher than the
position of this screw. Leave ¼" of the screw
head away from the wall.
Hang your Smart Sprinkler Controller on
the screw from the top hole on the back
of the device.
2. Attach
STEP 6STEP 5
¼"
4. Secure
Use a level to level your Smart Sprinkler
Controller on the wall.
3. Level (optional)
Mark location for bottom anchors and screws.
Screw the last two provided screws into the
bottom two holes into the wall.
*Sold separately
30
Moen Artwork Information:
Designer: Mike Satira | mik[email protected]
Native Artwork Created With: Adobe Illustrator 2022
Supplier originally printing this package: Winglee 2657
Project Number: 6396
Internal Job Number: W23-0212
Ink: 4C Process + 1 PMS Color
Color Standard
MOEN SMART WATER BLUE
(PMS 533)
Print Vendor:
Match to Pantone
Chip PMS 533
-
1
-
2
-
3
-
4
-
5
-
6
Moen WICNT016G1USA, a smart sprinkler controller, automates your irrigation system, allowing you to control and customize your watering schedule from anywhere using your smartphone or tablet. With its user-friendly app, you can easily set watering schedules, adjust them based on real-time weather conditions, and monitor your water usage. The controller also features a compatibility with in-ground Moen Smart Wireless Soil Sensors (sold separately) that can help you save water by skipping scheduled watering when the soil moisture level is sufficient.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Rachio 8ZUWLC-S User manual
-
Aeon Matrix Yardian Pro Smart Sprinkler Controller User guide
-
Aeon Matrix PRO1902 User manual
-
Yardian YDN1602 User manual
-
Orbit B-hyve Smart Indoor Sprinkler Controller User guide
-
Orbit 57946 User manual
-
Orbit B-HYVE XR Smart Indoor-Outdoor Sprinkler Timer User guide
-
Rachio 16RACHBX Installation guide
-
-
Rachio 8ZULW-B User manual
