RUKO 1088 User manual

+1 888892-0155 Mon-Fri 7:00AM - 7:00PM (PST)

CONTACT US FOR MORE TECH SUPPORT

v3.0

+1 888892-0155 Mon-Fri 7:00AM - 7:00PM (PST)

CONTACT US FOR MORE TECH SUPPORT

Scan the QR code to download the Carle App

+86 19129317359

02-08

Please read this Disclaimer & Warning and Safety Guidelines

carefully before using our product.

This product is not recommended for people under the age of 3.

By using this product, you hereby agree to this disclaimer and

signify that you have read it fully. You agree that you are

responsible for your own conduct and damage caused while

using this product, and its consequences.

You agree to use this product only for purpoese that are proper

and in accordance with local regulations, terms and all

applicable policies and guidelines Ruko may make available.

When using this product, please be sure to strictly abide by the

speciﬁcation requirements and safety guidelines stated in this

document.

Any personal injury property damage, legal disputes and all

other adverse events caused by the violation of the safety

instructions or due to any other factor, WILL NOT be Ruko's

responsibility.

Suitable for users aged 3 and above.

Keep the product away from ﬁre and heat. In addition, please

keep it dry and clean.

Please take good care of the product. Don't apply too much force

while holding it.

Please use the robot on a ﬂat surface.

Please keep a safe distance from the robot while it is operating.

While the robot is operating, please don't hold its joints to avoid

pinching your ﬁngers and damaging the robot.

Please use the provided original charging cable to recharge the

robot(charger not included).

Please don't disassemble the robot's joints on your own. If you

need to do so, please contact our service team.

If the robot behaves abnormally, please cut off the power to

avoid ﬁnger-pinching and robot damage.

While operating the robot, please don't put it at an elevated

position or a place close to the edges to avoid the risks of falling

down and damage.

The company cannot be held liable for any damage resulting

from inappropriate use. In order to guarantee long service life,

we recommend not using the robot for longer than one hour

during a single use.

Please cut the power off, stop using the robot, and contact our after-sales

service team under the following circumstances :

The robot is emitting smoke or a scorched smell.

Water or other foreign matters get inside the robot.

The robot is damaged.

!

Do not allow the robot and Transmitter to touch with any kind of

liquid, or put it under sun exposure, severely squeezed, and

dropped from a high altitude.

Do not put the battery in the trans-

mitter when not in use. Because the

battery will discharge, power will

slowly decrease.

Do not allow the robot and transmitter to touch any kind of

liquid, or put it under sun exposure, severely squeezed, and

dropped from high altitude.

Violent strikes or trampling is strictly

prohibited. Repeated strikes or trampling

may cause damage to the robot and oil

paint may fall off.

Please make sure that the power of the robot is turned on

before playing.

Turn on the robot, then turn on the remote controller, please pair

it with the robot.

Connect robot Bluetooth with your phone, make sure that Carle

App in the phone is connected to the Bluetooth named

"JT_xxxx". (Reference to the Bluetooth Guidelines)

Remember to start the motor before playing. (Detail steps,

please refer to the Quick Start Guide)

Open Carle App, connect with robot Bluetooth "JT_xxxx", please

wait for about 2-10 seconds, then can control the Carle robot

through Carle App.

If you're still not connected to Bluetooth, please check your

phone's Bluetooth.

The voice commands did not follow the instruc-

tions.

The voice pronunciation is not standard or

speaking speed is too fast.

The robot is moving (needs to stop to recognize

voice commands).

Noisy environment.

Bluetooth is not turned on, Carle App is Bluetooth connection,

*not WiFi.

Whether it is connected to the wrong Bluetooth, one is a Blue-

tooth Playback named “JT_Speaker” and the other is a Blue-

tooth App named “JT_xxxx” control .

Need to wake up and connect to the Carle App again.

The crossed-out dustbin symbol indicates that batteries,

rechargeable batteries, button cells, battery packs, etc.

Must not be put in household waste. Batteries are harmful

to health and the environment. Please help to protect the

environment from health risks. If the toy is out of use,

please use a hammer to break the product to retrieve the

battery-operated toy or unscrew the battery door for

replaceable battery-operated toy, then take the battery out

from the toy. Dispose of the battery in accordance with

your local battery recycling or disposal laws.

Always remove batteries from the transmitter when it is not being

used for a long period of time.

To clean, wipe the toy gently with a clean cloth.

Keep the toy away from direct heat.

Do not submerge the toy in water, this can damage the robot.

Before ﬁrst use, read the user's information, and review it with

your child.

This toy is intended to be used in domestic areas (house and

garden) only.

Assembly should be performed under adult supervision

changing batteries/ spare parts, trimming, etc.)

Parental guidance is recommended when installing or replacing

batteries.

Do not change or modify anything on the toy.

Non-rechargeable batteries are not to be recharged.

Rechargeable batteries are to be removed before being charged

(Transmitter only).

Rechargeable batteries are only to be charged under adult

supervision.

Different types of batteries or new and used batteries are not to

be mixed (Transmitter only).

Only batteries of the same or equivalent type as recommended

are to be used.

Batteries are to be inserted with the correct polarity.

Exhausted batteries are to be removed from the toy and recycled

(Transmitter only).

The supply terminals are not to be short-circuited.

Do not mix old and new batteries (Transmitter only).

Do not mix alkaline, standard (carbon-zinc) or rechargeable

(nickel-cadmium) batteries (Transmitter only).

Please remove the battery from the remote control if it is not

used for a long time(Transmitter only).

Replace the remote control battery in time when it is out of

power(Transmitter only).

Do not dispose of the battery in ﬁre or heat.

Do not use or leave the battery near a heat source such as ﬁre or

heater.

Do not strike or throw the battery against a hard surface.

Do not immerse the battery in water, and keep the battery in a cool

dry environment.

When recharging, only use the battery charger speciﬁcally for

that purpose.

Do not over-discharge the battery.

Do not connect the battery to an electrical outlet.

Do not directly solder the battery or pierce the battery with a nail

or other sharp object.

Do not transport or store the battery together with metal objects

such as necklaces, hairpins, etc.

Do not disassemble or alter the battery.

The battery inside the toy can't be replaced by the user.

Charge the battery every 6 months.

It is forbidden to overcharge the battery, please remove the

charging cable in time after fully charged to avoid damage due

to overcharging.

The robot battery is located in the back of the robot to charge the

battery, please insert the robot battery that contained and is not

replaceable the provided USB charging cable to the robot with

any USB port of a power bank, mobile charger, car charger, or

computer. Switch off the robot before charging. A light in the

robot will be turned on during the charging process; when the

robot is fully charged the light will turn off. The charging time is

about 3 hours and the playing time is about 3 hours.

Reset Button

The reset button can be used to suspend the

program or wake up the robot on standby

state.

Page is loading ...

RUKO 1088 User manual

Related papers

Other documents