JD Williams 211.96.105M Assembly Instructions Manual

Type
Assembly Instructions Manual

JD Williams 211.96.105M is a wall-mounted shelf with 3 hooks, perfect for organizing and displaying items in your home. Its dimensions are 65cm in width, 15cm in depth, and 55cm in height, providing ample space for storage. The shelf is easy to assemble, with all the necessary components and fittings included in the package. It comes with 19 screws, 16 screws, 6 dowels, 3 hooks, and 2 wall fixing packs. For assembly, you will need a Phillips screwdriver (medium and large), a 7mm suitable drill bit, and a drill.

The shelf is designed for durability and longevity.

JD Williams 211.96.105M is a wall-mounted shelf with 3 hooks, perfect for organizing and displaying items in your home. Its dimensions are 65cm in width, 15cm in depth, and 55cm in height, providing ample space for storage. The shelf is easy to assemble, with all the necessary components and fittings included in the package. It comes with 19 screws, 16 screws, 6 dowels, 3 hooks, and 2 wall fixing packs. For assembly, you will need a Phillips screwdriver (medium and large), a 7mm suitable drill bit, and a drill.

The shelf is designed for durability and longevity.

Dimensions
Width - 65cm
Depth - 15cm
Height - 55cm
Important Please read these instructions fully before starting assembly
Assembly Instructions - please keep for future reference
Issue 1 - 19/11/18
Wall Mounted Shelf with 3 Hooks
211.96.105M
Customer Helpline:
0121 776 5720
If you need help or have damaged or missing parts, call the
Safety and Care Advice
Important Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
the following pages.
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• During assembly do not stand
or put weight on the product,
this could cause damage.
Assemble the item as close
room) as possible.
Assemble on a soft level
surface to avoid damaging the
• Parts of the assembly will be
easier with 2 people.
To reduce
the likelihood of
damaging your
product please
ensure that your
power drill is set on a low torque
setting.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Care and maintenance
Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the bolts
• Regularly check and ensure
tightend properly.
Handy Hints
1
WARNING
In order to help prevent overturning –
To help prevent product toppling over please follow the below steps:-
Do not allow children to climb or hang on the furniture
Do not place heavy items in the top drawers
Do not place heavy items on top of the furniture, unless the furniture has been
designed for this purpose
You will need to provide wall plugs and screws applicable for your wall type
Components - Panels
Please check you have all the panels listed below
2
Top Plinth x 1
1
Shelf Plinth x 1
2
Lower Plinth x 1
3
Left Side Panel x 1
4
Right Side Panel x 1
5
Upper Shelfx 1
6
Lower Back Panel x 1
9
Upper Back Panel x 1
8
Lower Shelf x 1
7
3
Note:
may be supplied than are required.
Components - Fittings
Ruler - Use this ruler to help correctly identify the screws
Tools required
100 20 30 40 50 60 70 80 90 100
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
110 115 120 125 130 135 140 145 150 155 160 165 170
105
Phillips screwdriver
(medium & large)
Drill
7mm Suitable drill bit
(for use with wall plug)
The screws length is measured from the head to the point (30mm screw shown).
Screw x 19 Screw x 16 Dowel x 6 Hooks x 3
Wall Fixing pack x 2
4
Assembly Instructions
Step 1
1
2
3
5
6
7
Inserting Dowels
1. Into Panels 1 2 and
3 insert a total of
6 x Dowels C as shown
1
2
3
Step 2
1
3
2
Connecting Right Hand
Panel
1. Locate Panels
6 and 7 onto
Right Side Panel 5 as
shown.
2. Connect Panels using a
total of 7 x Screws A
as shown
1
2
3
6
7
5
5
Assembly Instructions
Step 3
4
9
8
Connecting Left Hand
Panel
1. Locate Panels
6 and 7 onto
Left Side Panel 5 as
shown.
2. Connect Panels using a
total of 7 x Screws A
as shown
1
2
3
6
7
4
1
3
6
7
2
Step 4
Connecting Back
Panels
1. On the reverse of the
unit fit Back Panels 8
and 9 as shown using
a total of 18 x Screws B
8
9
6
Assembly Instructions
Step 5
E
E
E
E
1. To mount the unit to the
wall 2 x holes will need to be
drilled.
Note: Please refer to the wall
mounting guide at the back
of this instruction for further
details.
2. With the aid of someone,
lift the unit into the desired
position and mark the
with a suitable scribe. Please
use a spirit lebel to ensure
your marks are level before
any holes are drilled
3. Drill holes and insert 2 x
suitable Wall Plugs,
Please check the type of wall
you are xing to and for more
information please see the
guide to wall mounting
& Fixings on the back page
4. With the aid of someone
else. Hold the unit in position
and using 2 x suitable screws,
attach the unit to the wall.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

JD Williams 211.96.105M Assembly Instructions Manual

Type
Assembly Instructions Manual

JD Williams 211.96.105M is a wall-mounted shelf with 3 hooks, perfect for organizing and displaying items in your home. Its dimensions are 65cm in width, 15cm in depth, and 55cm in height, providing ample space for storage. The shelf is easy to assemble, with all the necessary components and fittings included in the package. It comes with 19 screws, 16 screws, 6 dowels, 3 hooks, and 2 wall fixing packs. For assembly, you will need a Phillips screwdriver (medium and large), a 7mm suitable drill bit, and a drill.

The shelf is designed for durability and longevity.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI