KitchenAid KUDF204KPA Specification

KUDF204KPA
KitchenAid
Brand
KitchenAid
Model
KUDF204KPA
Category
Fridges
Type
Specification

This manual is also suitable for

W11533207
*
Add 3/4” (1.9 cm) to the height dimension when
leveling legs are fully extended.
**
For custom panel models, this will vary.
Product Dimensions
1
Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the
right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product.
Specifications subject to change without notice.
Style 1- Stainless steel (front view)
Style 1- Stainless steel (top view)
1/4"
(0.63 cm)
15"
(38.1 cm)
30
1
/8"
(76.6 cm)
15"
(38.1 cm)
34
1
/8"
(86.8 cm)
23
7
/8"
(60.6 cm)
21
5
/8"
(55 cm)
23
5
/8"
(60 cm)
25
7
/8"
(65.7 cm)**
Style 1 - Stainless steel (side view)
34
1
/8"
(86.8 cm)*
4" (10.2 cm)*
41
1
/2” (105.5 cm)**
17
7
/16"
(44.3 cm)
21
5
/8" (55 cm)
22
1
/4" (56.5 cm)
Without water filter
23
1
/3" (59.3 cm)
With water filter
39
3
/32" (99.3 cm)
Detailed Planning Dimensions Guide
DOUBLE DRAWERS
REFRIGERATOR/FREEZER
REFRIGERATOR/REFRIGERATOR
Models: KUDR204KSB, KUDR204KPA, KUDF204KSB,
KUDF204KPA
05-May-2021 10:44:01 EDT | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
*
Add 3/4” (1.9 cm) to the height dimension when
leveling legs are fully extended.
**
For custom panel models, this will vary.
Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the
right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product.
Specifications subject to change without notice.
Style 2 - Overlay (side view)
34
1
/8"
(86.8 cm)*
4" (10.2 cm)*
16
7
/8"
(42.9 cm)
21
5
/8" (55 cm)
22
1
/4" (56.5 cm)
Without water filter
23
1
/3" (59.3 cm)
With water filter
38.5" (97.9 cm)
Opening Dimensions
A
B
C
D
E
F
F
G
G
I
Recessed
receptacle
locations
Utility
opening
H
Opening and utility location dimensions
Opening width - A
24” (60.96 cm) min.
Opening depth - B
24” (60.96 cm) min.
Opening height - C
34
1
/2” (87.6 cm) min.
35” (88.9 cm) max.
Dimension - D
12
1
/16” (30.64 cm)
Dimension - E 21
3
/4” (55.24 cm)
Dimension - F 1
3
/4” (4.44 cm)
Dimension - G 3” (7.62 cm)
Dimension - H 4
1
/2” (11.43 cm)
Dimension - I 9
1
/4” (23.49 cm)
Opening dimensions:
Height dimensions are shown with the leveling legs
extended to the minimum height.
NOTE: When leveling legs are fully extended, add
5/8” (1.58 cm) to the height dimensions. See “Product
Dimensions.”
If the fl oor of the opening is not level with the kitchen fl oor,
shim the opening to make it level with the kitchen fl oor.
2
Style 2 - Overlay (front view)
1/4"
(0.63 cm)
15"
(38.1 cm)
30
1
/8"
(76.6 cm)
15"
(38.1 cm)
34
1
/8"
(86.8 cm)
Style 2- Overlay (top view)
21
5
/8"
(55 cm)
23
1
/16"
(58.6 cm)
23
7
/8"
(60.6 cm)
Product Dimensions
05-May-2021 10:44:01 EDT | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the
right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product.
Specifications subject to change without notice.
Electrical Requirements
A 115 V, 60 Hz, AC only, 15 A or 20 A fused, grounded
electrical supply is required. It is recommended that a
separate circuit serving only your refrigerator be
provided. Use an outlet that cannot be turned off by a
switch. Do not use an extension cord.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
For the refrigerator to be fl ush with the front of the base
cabinets, remove any baseboards or moldings from the
rear of the opening.
Flooring under product must be at the same level as
the room. If the fl oor of the opening is not level with the
kitchen fl oor, shim the opening to make it level with the
kitchen fl oor.
A cold water supply with water pressure of between
30 psi and 120 psi (207 kPa and 827 kPa) is required to
operate ice maker. If you have questions about your
water pressure, call a licensed, qualifi ed plumber.
IMPORTANT:
Connect to potable water supply only.
Location Requirements
Water Supply Requirements
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from refrigerator.
Failure to do so can result in death, explosion, or fire.
IMPORTANT:
The pressure of the water supply coming out of a
reverse osmosis system going to the water inlet valve of
the refrigerator needs to be between 30 psi and 120 psi
(207 kPa and 827 kPa).
If a reverse osmosis water fi ltration system is connected
to your cold water supply, the water pressure to the
reverse osmosis system needs to be a minimum of
40 psi to 60 psi (276 kPa to 414 kPa).
If the water pressure to the reverse osmosis system is
less than 40 psi to 60 psi (276 kPa to 414 kPa):
Check to see whether the sediment fi lter in the
reverse osmosis system is blocked. Replace the fi lter
if necessary.
Allow the storage tank on the reverse osmosis system
to refi ll after heavy usage.
If you have questions about your water pressure, call a
licensed, qualifi ed plumber
Reverse Osmosis Water Supply
3
05-May-2021 10:44:01 EDT | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
Wood Panel Guide
Lower Door
IMPORTANT:
Panel dimensions shown are the minimum size to
cover the appliance door. Panels can be made taller/
wider to match surrounding cabinetry.
The recommended thickness of the overlay panel is
3/4” (1.9 cm).
Custom glass door overlay panel must not weigh more
than 10 lb (4.54 kg).
Overlay panels weighing more than recommended
may cause damage to your appliance.
W11533207 12/2020
®
/™ ©2020 All rights reserved. Used under license in Canada.
CAUTION: Installation of door panels with less than
a 3/8” (0.95 cm) gap between the door panel and
the adjacent cabinet increases the risk of potential
pinching.
Upper Door
Bottom
15” (38 cm)
13/16”
(2.05 cm)
11/16”
(1.75 cm)
Top
11/16”
(1.75 cm)
13
7
/16”” (34.2 cm)
11/16”
(1.75 cm)
Pilot hole 4 places
3/4”
(1.9 cm)
22
3
/8” (56.8 cm)
23
3
/4” (60.3 cm)
Bottom
15” (38 cm)
11/16”
(1.75 cm)
11/16”
(1.75 cm)
Top
11/16”
(1.75 cm)
12
13
/16” (32.6 cm)
1
7
/16”
(3.65 cm)
Pilot hole 4 places
3/4”
(1.9 cm)
22
3
/8” (56.8 cm)
23
3
/4” (60.3 cm)
Top and bottom overlay drawer panel dimensions:
4
05-May-2021 10:44:01 EDT | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

KitchenAid KUDF204KPA Specification

KUDF204KPA
KitchenAid
Brand
KitchenAid
Model
KUDF204KPA
Category
Fridges
Type
Specification
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents