Neoway M590E V1 is a versatile and powerful GPRS module that enables wireless connectivity and data transmission for various IoT applications. With its compact size and low power consumption, it's ideal for battery-powered devices. Key features include:
- Reliable GPRS connectivity for data transmission and communication
- Comprehensive AT command set for easy integration and control
- Supports various network protocols, including TCP/IP, UDP, and PPP
- Data rates up to 85.6 kbps for efficient data transfer
- Extended temperature range (-40°C to +85°C) for use in harsh environments
- Embedded TCP/IP stack for direct connection to the Internet
Neoway M590E V1 is a versatile and powerful GPRS module that enables wireless connectivity and data transmission for various IoT applications. With its compact size and low power consumption, it's ideal for battery-powered devices. Key features include:
- Reliable GPRS connectivity for data transmission and communication
- Comprehensive AT command set for easy integration and control
- Supports various network protocols, including TCP/IP, UDP, and PPP
- Data rates up to 85.6 kbps for efficient data transfer
- Extended temperature range (-40°C to +85°C) for use in harsh environments
- Embedded TCP/IP stack for direct connection to the Internet
Neo_M590E V1 GPRS Module
Software Upgrade Guide
Version 1.0
Neo_M590E V1 GPRS Module Software Upgrade Guide
Copyright © Neoway Technology Co., Ltd
i
Copyright © Neoway Technology Co., Ltd 2016. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without
prior written consent of Shenzhen Neoway Technology Co., Ltd.
is the trademark of Neoway Technology Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their
respective holders.
Notice
This document provides guide for users to use the M590E V1.
This document is intended for system engineers (SEs), development engineers, and test
engineers.
The information in this document is subject to change without notice due to product version
update or other reasons.
Every effort has been made in preparation of this document to ensure accuracy of the contents,
but all statements, information, and recommendations in this document do not constitute a
warranty of any kind, express or implied.
Neoway provides customers complete technical support. If you have any question, please
contact your account manager or email to the following email addresses:
Sales@neoway.com
Support@neoway.com
Website: http://www.neoway.com
Neo_M590E V1 GPRS Module Software Upgrade Guide
Copyright © Neoway Technology Co., Ltd
ii
Revision Record
Issue
Changes
Date
V1.0
Initial draft
2016-02-29
Neo_M590E V1 GPRS Module Software Upgrade Guide
Copyright © Neoway Technology Co., Ltd
iii
Contents
1 Upgrade Interfaces ............................................................................................................ 1
2 Upgrade Tools .................................................................................................................... 2
3 Cable Connection .............................................................................................................. 3
4 Tool Installation ................................................................................................................ 5
5 Upgrading the Module ..................................................................................................... 6
Neo_M590E V1 GPRS Module Software Upgrade Guide
Copyright © Neoway Technology Co., Ltd
1
About This Document
This document describes how to upgrade the M590E V1 module and lists required hardware and software.
It provides upgrade instruction for users to commission the module.
1 Upgrade Interfaces
M590E V1 support software upgrade through the HOST interfaces.
The following figure shows the HOST pins on M590E V1.
Neo_M590E V1 GPRS Module Software Upgrade Guide
Copyright © Neoway Technology Co., Ltd
2
2 Upgrade Tools
To upgrade the module software through cable connections, you need to prepare both hardware and
software tool.
Hardware tool:
A set of demo board
USB-to-UART cable
Four cable threads of different colors
Pin connector
Software tool:
Software upgrade tool
USB-to-UART driver
Software package of the module
Neo_M590E V1 GPRS Module Software Upgrade Guide
Copyright © Neoway Technology Co., Ltd
3
3 Cable Connection
The following figure show a USB-to-UART cable.
From the top to the bottom, the threads are respectively: VBAT (red), GND (Black), HOST-RXD
(yellow), and HOST-TXD (green).
Fix the four cable threads of different colors as shown in the following figure.
The following figure shows a pin connector.
Green: HOST-TXD
Yellow: HOST-RXD
Black : GND
Red : VBAT
Neo_M590E V1 GPRS Module Software Upgrade Guide
Copyright © Neoway Technology Co., Ltd
4
The following figure shows the cable connection between the demo board and a computer.
Neo_M590E V1 GPRS Module Software Upgrade Guide
Copyright © Neoway Technology Co., Ltd
5
4 Tool Installation
ProductLineToolV9.00.02_20150508.rar is recommended for the upgrade.
Step 1 Decompress the package to any disk or folder.
No character of any other languages expect English is allowed in the directory to the tool.
Step 2 Open the folder and send the download.exe icon to the desktop.
Neo_M590E V1 GPRS Module Software Upgrade Guide
Copyright © Neoway Technology Co., Ltd
6
5 Upgrading the Module
Step 1 Double-click download_english.exe to start the upgrade tool.
Neo_M590E V1 GPRS Module Software Upgrade Guide
Copyright © Neoway Technology Co., Ltd
7
Step 2 Click Setup.
Neo_M590E V1 GPRS Module Software Upgrade Guide
Copyright © Neoway Technology Co., Ltd
8
Step 3 In the dialog box that is displayed, click the Download tab, select the LOD file for upgrade, and
click OK.
No character of any other languages expect English is allowed in the directory to the LOD file.
Neo_M590E V1 GPRS Module Software Upgrade Guide
Copyright © Neoway Technology Co., Ltd
9
Step 4 Connect the demo board to the computer properly, and then click Start all.
The upgrade starts.
——End
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
Neoway M590E V1 is a versatile and powerful GPRS module that enables wireless connectivity and data transmission for various IoT applications. With its compact size and low power consumption, it's ideal for battery-powered devices. Key features include:
- Reliable GPRS connectivity for data transmission and communication
- Comprehensive AT command set for easy integration and control
- Supports various network protocols, including TCP/IP, UDP, and PPP
- Data rates up to 85.6 kbps for efficient data transfer
- Extended temperature range (-40°C to +85°C) for use in harsh environments
- Embedded TCP/IP stack for direct connection to the Internet
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Quectel MC60-TE-A User manual
-
Quectel M66 Hardware Design
-
Quectel MC60-TE-A User manual
-
Quectel Wireless Solutions M10 User manual
-
Quectel M12 Hardware Design
-
Quectel M85 Hardware Design
-
SimCom SIM800H Hardware Design Manual
-
Quectel M10 Hardware Description
-
Quectel UC15 Hardware Design
-
Quectel Wireless Solutions M50 User manual
