Qomo QPC60 Quick Manual

Brand
Qomo
Model
QPC60
Type
Quick Manual
1. Plugging in the Power Outlet
Quick Guide to Connecting QPC60
• Connecting via VGA cable
Use VGA cable to connect
VGA IN connector on
the QPC60 (2A) to the VGA OUT
connector on the computer (2B).
Use VGA cable to connect VGA
OUT connector on QPC60 (2C) to
VGA IN connector on projector (2D).
• Connecting via USB
Press MENU button > select “USB Connect”. Choose “Disk” to connect mass storage. Choose “PC Cam” to
be as a PC-Cam.
• To display computer image, press PC
button (PC) on the control panel.
• To toggle between display modes, use
keyboard command (Fn + ).
• The signal is only pass through from
VAG IN to VGA OUT port on
document camera.
2. Connect to a computer or projector
2A 2C
2D
2B
Use power adapter to connect DC IN connector on the product to
a standard 100V~240V AC power outlet.
Innovative • Interactive • Intuitive
www.Qomo-Europe.eu
HD TV
• Connect via HDMI OUTPUT
1. Use HDMI cable to connect to your HDTV via the
HDMI OUT connector
2. Make sure the output switch is set for HDMI
mode and select an appropriate Aspect Ratio
Standard TV
• Connect via VGA OUTPUT
1. Use VGA cable to connect your TV’s RGB port via
the VGA OUT connector.
2. Make sure the output switch is set for VGA mode and
select an appropriate Aspect Ratio.
3. To output sound, simply use internal speaker, or
connect a speaker to the AUDIO OUT port.
• Connect via VIDEO OUTPUT
1. Use VIDEO cable (yellow) to connect to C-Video on
your TV via VIDEO OUT connector
2. Make sure the output switch is set for VIDEO mode.
3. To output sound, use AUDIO cable to connect to
your TV via the AUDIO OUT connector.
Connecting to a Television
www.Qomo-Europe.eu
Innovative • Interactive • Intuitive
  • Page 1 1
  • Page 2 2

Qomo QPC60 Quick Manual

Brand
Qomo
Model
QPC60
Type
Quick Manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents