ACR Electronics Sea Shelter™ 4 Cat I EPIRB Bracket Template

Sea Shelter™ 4 Cat I EPIRB Bracket

ACR Electronics

Brand: ACR Electronics

Model: Sea Shelter™ 4 Cat I EPIRB Bracket

Type: Template

This manual is also suitable for

2.62

2.57

9.48

3.00

5x

.281

C

L

1=25.4 (mm)

SCALE 1=1 ( in.)

0

1

2

3

4

Please Note: If mounting template is obtained from the ACR website, any

electronic media, or from a photocopy, please verify the dimensions of the scale

shown with actual measuring device. Duplicate templates may not be of true

1:1 scale. Any deviation should be considered when using mounting template.

5757 Ravenswood Road

Ft. Lauderdale, FL 33312

+1 (954) 981-3333

+1 (954) 983-5087 Fax

www.acrelectronics.com

[email protected]

Sea Shelter™

4

Mounting Template

Y1-06-0299 A

CAUTION: Category I brackets must be

mounted free from obstruction to allow

the beacon to automatically oat free

from the vessel in case of sinking. The

Sea Shelter™4 can be mounted on a

vertical surface with the beacon

antenna pointed skyward or a

horizontal surface with the beacon face

up. Avoid mounting locations that

subject the bracket to breaking waves.

Avoid structures like dodgers or cabin

tops that could trap the beacon upon

deployment.

1

ACR Electronics Sea Shelter™ 4 Cat I EPIRB Bracket Template

Sea Shelter™ 4 Cat I EPIRB Bracket

ACR Electronics

Brand: ACR Electronics

Model: Sea Shelter™ 4 Cat I EPIRB Bracket

Type: Template

This manual is also suitable for

Download PDF

Related papers

Other documents