Crawford & Burke HCB0342-HD Installation guide

Brand: Crawford & Burke

Model: HCB0342-HD

Type: Installation guide

SAVE THESE INSTRUCTIONS

ASSEMBLE ON A FLAT, PROTECTED SURFACE.

PART LIST FIGURE QUANTITY DESCRIPTION

A 1 PC BACK

B 1 PC RIGHT ARM

C 1 PC LEFT ARM

D 1 PC SEAT

E 2 PCS GLIDER

F 1 PC RIGHT LEG

G 1 PC LEFT LEG

H 2 PCS LEG SUPPORT

I 2 + 1 PCS LONG BOLT (M6*40)

J 14 + 1 PCS MEDIUM BOLT (M6*30)

K 8 + 1 PCS SHORT BOLT (M6*15)

L 24 + 1 PCS FLAT WASHER

M 1 PC ALLEN WRENCH

Page

1/3

ASSEMBLY INSTRUCTIONS (CONTINUED)

STEP 1

A. PLACE RIGHT ARM (B) UPSIDE DOWN ON A FLAT, PROTECTED

SURFACE.

B. ATTACH BACK (A) TO RIGHT ARM (B) USING FLAT WASHER (L) AND

MEDIUM BOLT (J). LOOSELY TIGHTEN WITH ALLEN WRENCH (M).

STEP 2

A. PLACE LEFT ARM (C) UPSIDE DOWN ON A FLAT, PROTECTED

SURFACE.

B. ATTACH BACK (A) TO LEFT ARM (C) USING FLAT WASHER (L) AND

MEDIUM BOLT (J). LOOSELY TIGHTEN WITH ALLEN WRENCH (M).

STEP 3

A. PLACE ASSEMBLY FACE DOWN ON A FLAT, PROTECTED SURFACE AS

SHOWN.

B. ATTACH THE FRONT OF SEAT (D) TO RIGHT ARM (B) USING FLAT

WASHER (L) AND MEDIUM BOLT (J). LOOSELY TIGHTEN WITH ALLEN

WRENCH (M).

C. REPEAT STEP B TO ATTACH THE BACK OF SEAT (D) TO RIGHT ARM (B),

DO NOT TIGHTEN COMPLETELY.

D. ATTACH THE FRONT OF SEAT (D) TO LEFT ARM (C) USING FLAT

WASHER (L) AND MEDIUM BOLT (J). LOOSELY TIGHTEN WITH ALLEN

WRENCH (M).

E. REPEAT STEP D TO ATTACH THE BACK OF SEAT (D) TO LEFT ARM (C).

F.FULLY TIGHTEN ALL BOLTS FROM PREVIOUS STEPS USING ALLEN

WRENCH (M).

STEP 4

A. CONNECT THE GLIDERS (E) TO RIGHT ARM (B) AND LEFT ARM (C)

USING FLAT WASHER (L) AND MEDIUM BOLT (J). LOOSELY TIGHTEN

WITH ALLEN WRENCH (M).

Page

2/3

ASSEMBLY INSTRUCTIONS (CONTINUED)

WEIGHT LIMIT

500 LBS

CARE AND CLEANING

IN ORDER TO PROLONG THE LIFE OF YOUR GLIDER, PLEASE STORE IN DRY SHELTERED PLACE WHEN NOT IN USE OR DURING INCLEMENT WEATHER.

STEP 5

A. CONNECT THE TOPS OF GLIDERS (E) TO THE TOP OF RIGHT LEG (F)

AND LEFT LEG (G) USING FLAT WASHER (L) AND MEDIUM BOLT (J).

LOOSELY TIGHTEN WITH ALLEN WRENCH (M).

STEP 6

A. ATTACH THE LEG SUPPORTS (H) TO THE BOTTOMS OF RIGHT LEG (F)

AND LEFT LEG (G) USING FLAT WASHER (L) AND SHORT BOLT (K).

LOOSELY TIGHTEN WITH ALLEN WRENCH (M). DO NOT TIGHTEN

COMPLETELY.

STEP 7

A. ROTATE BENCH TO UPRIGHT POSITION.

B. FULLY TIGHTEN ALL BOLTS WITH ALLEN WRENCH (M).

C. KEEP ALLEN WRENCH (M) TO TIGHTEN BOLTS PERIODICALLY AS

NEEDED.

Page

3/3

Crawford & Burke HCB0342-HD Installation guide

Crawford & Burke HCB0342-HD Installation guide

Crawford & Burke HCB0342-HD Installation guide

Related papers

Other documents