Formufit F00190E-BK-4 Operating instructions

Brand
Formufit
Model
F00190E-BK-4
Type
Operating instructions
90 Degree PVC Fitting
FORMUFIT 90 Degree PVC Fittings can accept up to two (2) segment of PVC pipe and can be
used to create perfect right angles in PVC pipe projects. To connect this product to PVC pipe,
follow the instructions shown below.
Assembly
Securing
For permanent and strong connections, it is!recommended to use!PVC cement/solvent to
attach the PVC pipe and 90 Degree PVC Elbow fitting.
You can also temporarily connect this fitting by driving a self-tapping screw where the pipe
and fitting meet, or apply electrical tape over the end of the pipe before inserting into the
fitting for a temporary, yet strong connection.
All rights reserved. TM, ® & Copyright © 2009-2018 FORMUFIT LC
https://formufit.com
PRODUCT INSTRUCTIONS
Slip a segment of!PVC pipe inside one
of the sockets on the!90 Degree fitting.
Push or tap into place until the pipe
hits the stop inside of the socket.
Repeat for each additional socket.
1
2
  • Page 1 1

Formufit F00190E-BK-4 Operating instructions

Brand
Formufit
Model
F00190E-BK-4
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents