Aigital US T821-2W-XX User manual

Brand: Aigital

Model: US T821-2W-XX

Category: Mobile headsets

Type: User manual

This manual is also suitable for

13
T821

User Manual

for

T821 Bluetooth In-car Speakerphone

Unit Picture & Button Description

Thanks for choosing this Bluetooth in-car Speakerphone from us Aigital. It is

specially designed for safe driving, easy to call out and answer incoming calls while

driving. It has clear and loud sound, so you can hear phone talking or music or GPS

navigation clearly even though you are in noisy downtown or on highway. The

most important is that it keeps your eyes and attention on the road when driving to

keep safe.

Please read below user manual carefully before using it:

Operation:

1. Charge your Bluetooth In-car Speakerphone

Make sure that your Bluetooth in-car speakerphone is fully charged before you

start selling it. Please use micro USB cable to charge it. When the LED is red, it's

charging. When the LED light turns off, it's fully charged. (Some will show solid blue

when fully charged)

When it's with low battery, it will have voice prompt of "Battery Low".Please

charge the unit when you hear voice prompt to ensure this Bluetooth in-car

speakerphone work well.

2. Turn on your Bluetooth in-car Speakerphone

Please toggle ON/OFF button to turn on/turn off the speakerphone.

3. Pairing it with your phone:

When use this device first time,you need to pair it with your cell phone:

a.Turn on the device,you will hear the voice "Pairing";

b.Activate the Bluetooth Function of your phone and search Bluetooth signals;

c.Select pairing name "T821" on your phone, and click it to pair(some mobile

phones require entering password"0000").When pair successfully,you can hear the

voice prompt "CONNTECED".

※

NOTE

If not paired successfully first time, please turn off then turn on the device to

repeat above steps for pairing.

△Connecting To Phone 2：

This device supports to connect 2 phones simultaneously on working.If you

want to connect it to another Bluetooth Enabled phone, please follow up below

steps:

Cut off the 1st mobile phone Bluetooth function to disconnect with this device;

Turn off and turn on the device again;

Follow the steps above of connection with 1st phone and pair it with 2nd

phone.

Turn on your 1st phone Bluetooth function and click T821 to pair it.

※

NOTE

After switch on/off,the device will automatically connect with above 2

connected phones.

4. Support Multi-Languages:

This speakerphone supports English/French/Spanish/Chinese voice prompt.

Please turn off the device and turn it on, then press the volume button "+" and "-" at

same time to switch languages. You will hear voice prompts.

·See how to switch languages:

https://www.amazon.com/dp/B07CJF2ZFP?ref=cp_d_n_mn

5. Answer / Reject / End Up Phone Calls:

When phone rings, press the calling button once to answer call; Press calling

button again to end up talking.

Long press the calling button for 3 seconds to reject calls.

6. Redial Last Calling Number:

When speakerphone is on, shortly press the calling button twice to redial last

call number.

7. Volume Control:

Press the volume button +/- on the speakerphone to increase or decrease the

volume.

8. Play music

When speakerphone is on standby mode, shortly press calling button once to

play music, and press button +/- to adjust the volume.

9. Activate Siri / Google assistant

On standby mode, long press calling button for 3 seconds then release it to

activate siri or Google assistant (Your phone should supports siri or Google assistant

function).

10. AUTO POWER ON:

This Bluetooth car speakerphone has built-in motion sensor, so it could turn on

automatically when it senses shocking.

Please clip it on your sun visor. When you leave your car, you don't need to turn

it off by switching the ON/OFF button. Just leave it there. It will turn to sleep mode

after it disconnects with your phone for about 5 minutes. Then when you come back,

get in your car, open and close your car door, it will sense your car shocking, then it

will turn on and re-connect with your phone automatically.

Specifications:

Bluetooth Version: Bluetooth V4.1+EDR

Bluetooth Profile: AVRCP 1.5, A2DP 1.2, Hands-Free Profile 1.6, Headset Profile v1.1

Frequency Range: ISM 2.4GHz ~ 2.48GHz

Wireless Transmission Range: ≥15M (free space)

Charging Input: 5V/500mA

Rechargeable Li-Polymer Battery: 3.7V, 1000mAh

Charging Time: About 2-3 hours

Talking Time: Up to 20 hours

Stand-by Time: 40 days

Maintenance:

1. Don't put the Bluetooth in-car Speakerphone in the liquid & extreme

humidity or heavy perspiration, extreme heat conditions

2. Keep the Bluetooth in-car Speakerphone away from fire, corrosive liquid,

sharp objects.

3. Don't try to open the case by yourself.

What we provide:

1. Unbelievable Warranty and Service

2. 7/24 online support: [email protected]

3. Welcome to send your suggestion to us, so we can improve

our products all the time.

Aigital US T821-2W-XX User manual

Brand: Aigital

Model: US T821-2W-XX

Category: Mobile headsets

Type: User manual

This manual is also suitable for

13
T821

Download PDF

report

Aigital US T821-2W-XX User manual

This manual is also suitable for

Aigital US T821-2W-XX User manual

Related papers

Other documents