FormNo.3431-601RevA
DipstickKit
TXL2000ToolCarrier
ModelNo.139-4845
InstallationInstructions
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Nopartsrequired
–
Preparethemachine.
Nopartsrequired
–
Removetheenginepanel.
Dipstickguide1
Dipstick1
Bolt(M8x12mm)
1
Cabletie
1
Installthenewdipstick.
PreparingtheMachine
1.Parkthemachineonalevelsurface.
2.Removeanyattachments;refertotheOperator’s
Manualforthemachine.
3.Raisetheloaderarmsandsecurethemwith
cylinderlocks.
4.Shutofftheengineandremovethekey.
RemovingtheEnginePanel
Note:Reversetheproceduretoinstalltheengine
panelafterinstallingthekit.
1.Openthehood.
2.Removethescrewclampsecuringthehoseto
thehydraulic-tankbreatherontherightsideof
theenginepanel(Figure1).
g286600
Figure1
1.Hydraulic-tankbreather3.Hose
2.Screwclamp
©2019—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3431-601*A
3.Removethehosefromthebreather.
4.Ontheleftsideoftheenginepanel,remove
the2bolts(5/16inch)and2nuts(5/16inch)
securingtheleftgrilleplatetotheenginepanel
(Figure2).
g286599
Figure2
1.Enginepanel
4.Bolt—5/16inch(2)
2.Nut—5/16inch(2)5.Bolt—3/8inch(2)
3.Leftgrilleplate6.Nut—3/8inch(2)
5.Removethe2bolts(3/8inch)and2nuts(3/8
inch)securingtheenginepaneltothemain
frameofthemachine(Figure2).
6.Repeatsteps4and5fortherightsideofthe
machine.
7.Removetheenginepanel.
InstallingtheNewDipstick
Note:Theexistingdipstickandguidedoesnotneed
toberemoved.
1.Removetheplugontheleftsideoftheengine
(Figure3).
g286748
Figure3
1.Wireharness3.Plug
2.Cabletie
2.Cutandremovethecabletiesecuringthewire
harnesstotheengine(Figure3).
3.Installthedipstickguideanddipstick(Figure4).
2
/