2. Toro
  3. Auxiliary Wire Harness Kit, Telescoping TXL 2000 Tool Carrier

Toro Auxiliary Wire Harness Kit, Telescoping TXL 2000 Tool Carrier Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Auxiliary Wire Harness Kit, Telescoping TXL 2000 Tool Carrier Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3430-985RevA
AuxiliaryWireHarnessKit
TXL2000ToolCarrier
ModelNo.139-1186
ModelNo.139-1188
InstallationInstructions
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
1
Nopartsrequired
–
Preparethemachine.
Wireharness1
Lockwasher1
Connectornut
1
Couplingcover
1
2
Cabletie(telescopingmodelsonly)
1
Installthewireharness.
Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
1
PreparingtheMachine
NoPartsRequired
Procedure
1.Parkthemachineonalevelsurface.
2.Lowertheloaderarms.
3.Shutofftheengineandremovethekey.
4.Opentherear-accesscover.
5.Turnthebattery-disconnectswitchtotheOFF
position(Figure1).
g261512
Figure1
1.Battery-disconnect
switch—OFFposition
2.Battery-disconnect
switch—ONposition
©2019—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3430-985*A
2
InstallingtheWireHarness
Partsneededforthisprocedure:
1Wireharness
1Lockwasher
1
Connectornut
1
Couplingcover
1
Cabletie(telescopingmodelsonly)
Procedure
1.Removetheplugfromanaccessoryconnector
(P50,P75,orP76)onthemachinewireharness
andplugtheaccessoryconnectorfromthe
auxiliarywireharnesstoit(Figure2).
g282599
Figure2
1.Accessoryconnectorfrom
auxiliarywireharness
2.Accessoryconnectors
frommachinewireharness
2.Routetheendwiththeattachmentconnector
alongtheauxiliaryhydraulichoseouttheleft
sideofthemachineframetotheleftloaderarm
(Figure3).
g282757
Figure3
1.Auxiliaryhydraulichose2.Wireharness
3.Continueroutingthewireharnessdownthe
loaderarm(Figure4orFigure5).
Note:Fortelescopingmodels,removethe
crossbarsonthehosecarriertoroutethewire
harnessalongthehoses,theninstallthecross
bars.
g282760
Figure4
Telescopingmodel
2
g282759
Figure5
Non-telescopingmodel
4.Securetheconnectortotheemptyholeinthe
couplermountusingalockwasher,connector
nut,andcouplingcover(Figure2).
g282758
Figure6
Hosettingsnotshownforclarity
1.Couplingcover
3.Lockwasher
2.Connectornut4.Connector
5.Fortelescopingmodels,securethewireharness
tothehydraulichosettingsusingacabletie,
asshowninFigure7.
g283190
Figure7
1.Cabletie
6.Turnthebattery-disconnectswitchtotheON
position(Figure1)andclosetherearcover.
3
/