Equinox Systems AZTEC User manual

Equinox Systems
Brand
Equinox Systems
Model
AZTEC
Category
Stroboscopes & disco lights
Type
User manual

This manual is also suitable for

Order code: EQLED368
Aztec
User Manual
www.prolight.co.uk Aztec User Manual
2
Safety advice
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL
CAREFULLY BEFORE YOUR INITIAL START-UP!
• Beforeyourinitialstart-up,pleasemakesurethatthereisnodamagecausedduringtransportation.
• Shouldtherebeanydamage,consultyourdealeranddonotusetheequipment.
• Tomaintaintheequipmentingoodworkingconditionandtoensuresafeoperation,itisnecessary
fortheusertofollowthesafetyinstructionsandwarningnoteswritteninthismanual.
• Pleasenotethatdamagescausedbyusermodicationstothisequipmentarenotsubjecttowarranty.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance
of this manual or any unauthorised modication to the equipment.
OPERATING DETERMINATIONS
Ifthisequipmentisoperatedinanyotherway,thanthosedescribedinthismanual,theproductmaysufferdamageand
thewarrantybecomesvoid.Incorrectoperationmayleadtodangere.g:short-circuit,burnsandelectricshocksetc.
Donotendangeryourownsafetyandthesafetyofothers!
Incorrectinstallationorusecancauseseriousdamagetopeopleand/orproperty.
CAUTION!
KEEP THIS EQUIPMENT
AWAY FROM RAIN,
MOISTURE AND LIQUIDS
CAUTION!
TAKE CARE USING
THIS EQUIPMENT!
HIGH VOLTAGE-RISK
OF ELECTRIC SHOCK!!
• Neverletthepowercablecomeintocontactwithother
cables.Handlethepowercableandallmainsvoltage
connectionswithparticularcaution!
• Neverremovewarningorinformativelabelsfromtheunit.
• Donotopentheequipmentanddonotmodifytheunit.
• Donotconnectthisequipmenttoadimmerpack.
• Donotswitchtheequipmentonandoffinshortintervals,
asthiswillreducethesystem’slife.
• Onlyusetheequipmentindoors.
• Donotexposetoammablesources,liquidsorgases.
• Alwaysdisconnectthepowerfromthemainswhen
equipmentisnotinuseorbeforecleaning!Onlyhandle
thepower-cablebytheplug.Neverpullouttheplugby
pullingthepower-cable.
• Makesurethattheavailablemainssupplyvoltageis
between100~240VAC,50/60Hz.
• Makesurethatthepowercableisnevercrimpedor
damaged.Checktheequipmentandthepowercable
periodically.
• Iftheequipmentisdroppedordamaged,disconnectthe
mainspowersupplyimmediatelyandhaveaqualied
engineerinspecttheequipmentbeforeoperatingagain.
• Iftheequipmenthasbeenexposedtodrastic
temperatureuctuation(e.g.aftertransportation),
donotconnectpowerorswitchitonimmediately.
Thearisingcondensationmightdamagetheequipment.
Leavetheequipmentswitchedoffuntilithasreached
roomtemperature.
• Ifyourproductfailstofunctioncorrectly,stopuse
immediately.Packtheunitsecurely(preferablyinthe
originalpackingmaterial),andreturnittoyourProLight
dealerforservice.
• Onlyusefusesofsametypeandrating.
• Repairs,servicingandpowerconnectionmustonlybe
carriedoutbyaqualiedtechnician.THISUNITCONTAINS
NOUSERSERVICEABLEPARTS.
• Thislightingxtureisforprofessionaluseonly-itis
notdesignedfororsuitableforhouseholduse.The
productmustbeinstalledbyaqualiedtechnicianin
accordancewithlocalterritoryregulations.Thesafetyof
theinstallationistheresponsibilityoftheinstaller.The
xturepresentsrisksofsevereinjuryordeathduetore
hazards,electricshockandfalls.
• Warning!RiskGroup2LEDproductaccordingto
EN62471.Donotviewthelightoutputwithoptical
instrumentsoranydevicethatmayconcentratethebeam.
• WARRANTY:Oneyearfromdateofpurchase.
www.prolight.co.uk Aztec User Manual
3
Product overview & technical specications
Thiseffectparcombinesmultipletechnologiesintoasingle,compactlightweighthousing.Thethree8WRGB+UV
LEDs,atriformationofRGBSMDLEDsandaringofwhitestrobeSMDLEDsmakeforaneffectlikenoother.
Theon-boardmenusystemofferscontrolinauto,soundactivation,
master/slaveandDMXmodesandtheincludedIRremoteallowseach
effecttobeusedindependentlyormultipleeffectstobecombined.
•3x8Wquad-colourLEDs(RGBUV)plus18x0.5Wtri-colourSMD5050
LEDs(RGB)and27x0.5WwhiteSMD5050LEDs
•Beamangle:25°
•1,003Lux@2m(fullon)
•DMXchannels:1/7or11selectable
•Auto,soundactiveandmaster/slavemodes
•0-100%dimmingandvariablestrobe
•Bracketallowsformultiplerigging
andoorstandingapplications
•4pushbuttonmenuwithLEDdisplay
•IECpowerinput/output
•3-PinXLRinput/output
•Fancooled
•SuppliedwithIRremote
Aztec
Specications Aztec
Powerconsumption 38W
Powersupply 100~240V,50/60Hz
Fuse F1A250V
Dimensions 250x210x123mm
Weight 1.2kg
Ordercodes EQLED368
250mm
210mm 123mm
0m 1m 2m 3m 4m 5m
25° - Lux
FULL ON
R
G
B
UV
4000
1630
2420
212
N/A
1003
407
606
53
N/A
444
181
269
23.6
N/A
25°
250
102
152
13.3
N/A
160
65.1
97
8.4
N/A
www.prolight.co.uk Aztec User Manual
4
Technical specications
DOWNUPMENU ENTER
www.prolight.co.uk
POWER INPUT:
100-240V~50/60Hz
FUSE: F1A 250V
POWER CONSUMPTION: 38W
SAFETY EYE
DMX INPUT DMX OUTPUT
MIC
POWER OUTPUT:
100-240V~50/60Hz
01
02
09
10
06
08
07
04
05
09
11
03
01-LEDdisplay
02-Functionbuttons
03-Microphone
04-3-PinDMXinput
05-3-PinDMXoutput
06-IECpowerinput
07-IECpoweroutput
08-FuseF1A250V
09-Bracketknobs
10-Bracket
11-Safetyeye
Inthebox:1 x xture,
1 x IR remote,
1 x power cable,
& 1 x user manual
www.prolight.co.uk Aztec User Manual
5
Operating instructionsOperating instructions
MENU
A u 1
A u 4
A u t o
Auto modes
S o 1
S o 4
S o u n
Sound modes
S P 1
S P 9
S P E E
Speed setting
d I 1
d I 9
d I N N
Master dimmer
S 0 1
S 1 7
S t @ t
Static colour mode (par LEDs)
S E 1
S E 9
S E n S
Sound sensitivity
o n
o F F
I n F r
IR remote on/off
S L A V
Slave mode
d 0 0 1
d 5 1 2
DMX settings
1 C h
7 C h
1 1 C h
A d d r
C o L o
r 0 0 1
g 0 0 1
r 2 5 5
g 2 5 5
b 0 0 1
u 0 0 1
b 2 5 5
u 2 5 5
Colour mix mode
www.prolight.co.uk Aztec User Manual
6
DMX mode:
OperatinginaDMXcontrolmodeenvironmentgivestheuserthegreatestexibilitywhenitcomes
tocustomisingorcreatingashow.Inthismodeyouwillbeabletocontroleachindividualtraitof
thextureandeachxtureindependently.
ToaccesstheDMXmode,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonstoshow
AddrontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonsto
chooseoneofthe1/7or11DMXchannelmodes.Pressthe“ENTER”buttontoconrmthesetting.
ThedisplaywillnowshowAddrontheLEDdisplay.Pressthe“ENTER”buttonandusethe“UP”and
“DOWN”buttonstosettherequiredDMXaddress.Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Operating instructions
1 channel mode:
Channel Value Function
CH1
000-009 Nofunction
010-039
Automode1-Par
LEDs+TriSMDLEDs
+WhiteSMDLEDs
(slow-fast)
040-069
Automode2-
ParLEDs
070-099
Automode3-
TriSMDLEDs+
WhiteSMDLEDs
100-129
Automode4-
WhiteSMDLEDs
130-159
Soundmode1-Par
LEDs+TriSMDLEDs
+WhiteSMDLEDs
(sensitivity
setinmenu)
160-189
Soundmode2-
ParLEDs
190-219
Soundmode3-
TriSMDLEDs+
WhiteSMDLEDs
220-255
Soundmode4-
WhiteSMDLEDs
www.prolight.co.uk Aztec User Manual
7
7 channel mode:
Channel Value Function
CH1 000-255 Masterdimmer(0-100%)
CH2 000-255 Strobe(slow-fast)
ParLEDs
CH3
000-009 Nofunction
010-019 Red
020-029 Green
030-039 Blue
040-049 UV
050-059 Yellow
060-069 Magenta
070-079 Cyan
080-089 DarkOrange
090-099 LimeGreen
100-109 SalmonPink
110-119 Turquoise
120-129 LightGreen
130-139 Orange
140-149 Lavender
150-159 LightBlue
160-169 DarkBlue
170-255 Pink
CH4
000-009 Nofunction
WhiteSMD
LEDs
010-255 Strobe(slow-fast)
CH5
000-009 Nofunction
010-149 StaticPatterns
150-255 MovingPatterns
CH6
000-009 Nofunction
TriSMD
LEDs
010-029 Red
030-049 Green
050-069 Blue
070-089 Yellow
090-109 Cyan
110-129 Magenta
130-149 White
150-255 MovingPatterns
Operating instructions
Channel Value Function
CH7
000-009 Nofunction
010-039
Automode1-Par
LEDs+TriSMDLEDs
+WhiteSMDLEDs
(slow-fast)
040-069
Automode2
-ParLEDs
070-099
Automode3
-TriSMDLEDs+
WhiteSMDLEDs
100-129
Automode4
-WhiteSMDLEDs
130-159
Soundmode1-Par
LEDs+TriSMDLEDs
+WhiteSMDLEDs
(sensitivity
setinmenu)
160-189
Soundmode2
-ParLEDs
190-219
Soundmode3
-TriSMDLEDs+
WhiteSMDLEDs
220-255
Soundmode4
-WhiteSMDLEDs
www.prolight.co.uk Aztec User Manual
8
Operating instructions
11 channel mode:
Channel Value Function
CH1 000-255 Masterdimmer(0-100%)
Par
LEDs
CH2 000-255 Strobe(slow-fast)
CH3 000-255 Reddimmer(0-100%)
CH4 000-255 Greendimmer(0-100%)
CH5 000-255 Bluedimmer(0-100%)
CH6 000-255 UVdimmer(0-100%)
CH7
000-009 Nofunction
010-019 Red
020-029 Green
030-039 Blue
040-049 UV
050-059 Yellow
060-069 Magenta
070-079 Cyan
080-089 DarkOrange
090-099 LimeGreen
100-109 SalmonPink
110-119 Turquoise
120-129 LightGreen
130-139 Orange
140-149 Lavender
150-159 LightBlue
160-169 DarkBlue
170-255 Pink
CH8
000-009 Nofunction
White
SMD
LEDs
010-255 Strobe(slow-fast)
CH9
000-009 Nofunction
010-149 StaticPatterns
150-255 MovingPatterns
CH10
000-009 Nofunction
TriSMD
LEDs
010-029 Red
030-049 Green
050-069 Blue
070-089 Yellow
090-109 Cyan
110-129 Magenta
130-149 White
150-255 MovingPatterns
Channel Value Function
CH11
000-009 Nofunction
010-039
Automode1-ParLEDs
+TriSMDLEDs+White
SMDLEDs
(slow-
fast)
040-069
Automode2
-ParLEDs
070-099
Automode3
-TriSMDLEDs+White
SMDLEDs
100-129
Automode4
-WhiteSMDLEDs
130-159
Soundmode1-Par
LEDs+TriSMDLEDs+
WhiteSMDLEDs
(sens
setin
menu)
160-189
Soundmode2
-ParLEDs
190-219
Soundmode3
-TriSMDLEDs+White
SMDLEDs
220-255
Soundmode4
-WhiteSMDLEDs
www.prolight.co.uk Aztec User Manual
9
Operating instructions
Static colour mode (par LEDs):
Toaccessthestaticcolourmode,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonsto
showSt@tontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttons
tochooseoneofthestaticcoloursbetweenS 01~S 17.
Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Auto modes:
Toaccesstheautomodes,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonstoshow
AutoontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonsto
chooseoneoftheautomodesbetweenAu 1~Au 4.
Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Sound modes:
Toaccessthesoundmodes,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonstoshow
SounontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonsto
chooseoneofthesoundmodesbetweenSo 1~So 4.
Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
01 Red
02 Green
03 Blue
04 UV
05 Yellow
06 Magenta
07 Cyan
08 DarkOrange
09 LimeGreen
10 SalmonPink
11 Turquoise
12 LightGreen
13 Orange
14 Lavender
15 LightBlue
16 DarkBlue
17 Pink
Colour macros:
Automode1 ParLEDs+TriSMDLEDs+WhiteSMDLEDs
Automode2 ParLEDs
Automode3 TriSMDLEDs+WhiteSMDLEDs
Automode4 WhiteSMDLEDs
Soundmode1 ParLEDs+TriSMDLEDs+WhiteSMDLEDs
Soundmode2 ParLEDs
Soundmode3 TriSMDLEDs+WhiteSMDLEDs
Soundmode4 WhiteSMDLEDs
www.prolight.co.uk Aztec User Manual
10
Speed setting:
Toaccessthespeedsettingforautoandsoundmodes,pressthe“MENU”buttonandusethe“UP”and
“DOWN”buttonstoshowSPEEontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”
and“DOWN”buttonstoselectbetweenSP 1~SP 9.
Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Sound sensitivity:
Toaccessthesoundsensitivitysetting,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttons
toshowSEnsontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”
buttonstoselectthesoundsensitivitybetweenSE 1~SE 9.
Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Colour mix mode:
Toaccessthecolourmixmode,pressthe“MENU”buttontoshowCoLoontheLEDdisplay.
Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochooser001.
Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstoselectthebrightnessofRed
between000~255.Value: 000 - 255 (000 = low, 255 = high). Nowpressthe“ENTER”buttonand
repeatforgGreen,bBlueanduUV.
Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Master dimmer:
ToaccessthemasterdimmersettingfortheparLEDs,pressthe“MENU”buttonandusethe“UP”and
“DOWN”buttonstoshowdINNontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”
and“DOWN”buttonstoselectthebrightnessbetweendI 1~dI 9.
Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Pleasenote:thisoverridesthebrightnessofparLEDsforstaticcolour,auto,sound
andcolourmixmodes.
Operating instructions
www.prolight.co.uk Aztec User Manual
11
Master/slave mode:
Tosetthemasterunit,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonstoselectoneof
theprogrammodes.
Tosettheotherunitsinslavemode,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonsto
showSLAVontheLEDdisplay.Pressthe“ENTER”buttontoconrmthesetting.
Theunitwillnowruninsequencewiththemasterunit.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
PleaseensurethatallslaveunitsaresettothesameDMXchannelmodeasthemasterunit.
IR remote setting:
ToaccesstheIRremotesetting,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonsto
showInFrontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttons
tochoosebetweenonorofF.Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
www.prolight.co.uk Aztec User Manual
12
Operating instructions
BL ACK
OU T
AUTO SO UND
STROB E SP EED
SE NSI-
TI VITY
%
DMX
MA N UAL
FADE
UNIT
R
B
G
A W
P
UV
0
31 2
4 5 6
8 9
+
7
07
01
02
04
08
10
11
05
09
03
06
12
11
A B C
D E
IR remote functions:
A-Red
B-Green
C-Blue
D-UV
E-White
01-Setstheunitintoblackoutoff/on(LEDon/off)
02-Activatestheautomodes,usethe‘+’and‘–’buttonsto
selecttheautomode.Pressingthe‘speed’buttonfollowed
bythe‘+’and‘–’buttonswillthenallowtheautomode
speedtobeadjusted
03-Activatesthesoundmodes,usethe‘+’and‘–’buttons
toselectthesoundmode.Pressingthe‘sensitivity’button
followedbythe‘+’and‘–’buttonswillthenallowthe
soundsensitivitybeadjusted
04-Activatesthestrobe,usethe‘+’and‘–’buttons
toadjustthestrobespeed
05-Activatestheautomodespeed.Pressthisbutton
followedbythe‘+’and‘–’buttonstoadjustthe
programspeed
06-Activatesthesoundmodesensitivity.Pressthisbutton
followedbythe‘+’and‘–’buttonstoadjustthe
soundsensitivity
07-ActivatestheDMXmode
Pleasenote:theDMXaddressandchannelmust
bepresetinthemenu
08-Activatesthestaticcolour/manualmodes,usethe
‘+’and‘–’buttonstoselectacolourfromthepre-
programmedstaticcoloursorusethe‘R’,‘G’,‘B’,‘UV’or
‘W’buttonstocreateamanualcolour.Pressingthe‘Fade/
unit’buttonallowsthechosencolourtoenterthefade
program
09-Activatesthefademode
10-Manualcolourselection
11-Adjuststheautomode,soundmode,speed,
soundsensitivity,strobespeedandstaticcolour/manual
colourmodes
12-Setsthebrightnessofauto,sound,staticcolourand
manualmodes(1-lowbrightness,9-highbrightness)
Pleasenote:inmanualmode‘R’,‘G’and‘B’buttonswill
controlthecolouroftheparLEDsandthetri-colourSMD
LEDs.The‘UV’buttoncanonlybeusedwiththeparLEDs.
The‘White’buttoncanonlybeusedwiththewhite
SMDLEDs.
www.prolight.co.uk Aztec User Manual
13
Setting the DMX address:
TheDMXmodeenablestheuseofauniversalDMXcontroller.Eachxturerequiresa“startaddress”
from1-512.Axturerequiringoneormorechannelsforcontrolbeginstoreadthedataonthechannel
indicatedbythestartaddress.Forexample,axturethatoccupiesoruses7channelsofDMXandwas
addressedtostartonDMXchannel100,wouldreaddatafromchannels:100,101,102,103,104,105
and106.Chooseastartaddresssothatthechannelsuseddonotoverlap.E.g.thenextunitinthe
chainstartsat107.
DMX 512:
DMX(DigitalMultiplex)isauniversalprotocolusedasaformofcommunicationbetweenintelligent
xturesandcontrollers.ADMXcontrollersendsDMXdatainstructionsformthecontrollertothexture.
DMXdataissentasserialdatathattravelsfromxturetoxtureviatheDATA“IN”andDATA“OUT”
XLRterminalslocatedonallDMXxtures(mostcontrollersonlyhaveadata“out”terminal).
DMX linking:
DMXisalanguageallowingallmakesandmodelsofdifferentmanufacturestobelinkedtogether
andoperatefromasinglecontroller,aslongasallxturesandthecontrollerareDMXcompliant.
ToensureproperDMXdatatransmission,whenusingseveralDMXxturestrytousetheshortest
cablepathpossible.TheorderinwhichxturesareconnectedinaDMXlinedoesnotinuencethe
DMXaddressing.Forexample;axtureassignedtoaDMXaddressof1maybeplacedanywherein
aDMXline,atthebeginning,attheend,oranywhereinthemiddle.Whenaxtureisassigneda
DMXaddressof1,theDMXcontrollerknowstosendDATAassignedtoaddress1tothatunit,
nomatterwhereitislocatedintheDMXchain.
DATA cable (DMX cable) requirements (for DMX operation):
ThisxturecanbecontrolledviaDMX-512protocol.TheDMXaddressissetonthebackoftheunit.
YourunitandyourDMXcontrollerrequireastandard3-pinXLRconnectorfordatainput/output,
seeimagebelow.
Also remember that DMX cable must be daisy chained and cannot be split.
DMX setup
FurtherDMXcablescanbe
purchasedfromallgoodsound
andlightingsuppliersor
ProLightConceptsdealers.
Pleasequote:
CABL10 – 2m
CABL11 – 5m
CABL12 – 10m
www.prolight.co.uk Aztec User Manual
14
Notice:
Besuretofollowthediagramsbelowwhenmakingyourowncables.Donotconnectthecables
shieldconductortothegroundlugorallowtheshieldconductortocomeincontactwiththeXLRs
outercasing.Groundingtheshieldcouldcauseashortcircuitanderraticbehaviour.
Special note:
Line termination:
Whenlongerrunsofcableareused,
youmayneedtouseaterminatoron
thelastunittoavoiderraticbehaviour.
Using a cable terminator will decrease
the possibilities of erratic behaviour.
(3-pin - Order ref: CABL90, 5-pin - Order ref: CABL89)
5-pin XLR DMX connectors:
Somemanufacturesuse5-pinXLRconnectorsfordatatransmissioninplaceof3-pin.5-pinXLRxtures
maybeimplementedina3-pinXLRDMXline.Wheninsertingstandard5-pinXLRconnectorsintoa
3-pinlineacableadaptormustbeused.Thediagrambelowdetailsthecorrectcableconversion.
Terminationreducessignaltransmission
problemsandinterference.itisalways
advisabletoconnectaDMXterminal,
(resistance120Ohm1/4W)betweenpin2
(DMX-)andpin3(DMX+)ofthelastxture.
5-pin XLR (female)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-pin XLR (female)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
3-pin XLR (male)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
5-pin XLR (male)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
DMX setup
www.prolight.co.uk Aztec User Manual
15
WEEE notice
Correct Disposal of this Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries
with separate collection systems)
Thismarkingshownontheproductoritsliterature,indicatesthatitshouldnotbedisposedof
withotherhouseholdwastesattheendofitsworkinglife.Topreventpossibleharmtothe
environmentorhumanhealthfromuncontrolledwastedisposal,pleaseseparatethisfromother
typesofwastesandrecycleitresponsiblytopromotethesustainablereuseofmaterialresources.
Householdusersshouldcontacteithertheretailerwheretheypurchasedthisproduct,ortheir
localgovernmentofce,fordetailsofwhereandhowtheycantakethisitemforenvironmentally
saferecycling.
Businessusersshouldcontacttheirsupplierandcheckthetermsandconditionsofthe
purchasecontract.Thisproductshouldnotbemixedwithothercommercialwastesfordisposal.
www.prolight.co.uk Aztec User Manual
16
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Equinox Systems AZTEC User manual

Equinox Systems
Brand
Equinox Systems
Model
AZTEC
Category
Stroboscopes & disco lights
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents