ISSUED: 05-31-02 SHEET #: 031-9003-2 07-30-04
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
1 of 1
Installation and Assembly - Concrete Back-Up Wall Plate
IMPORTANT! Read entire instruction sheet before you start installation and assembly.
Model: WSP 415
This Back-up Wall Plate is for attachment to
concrete block or cinder block
Description
back-up wall plate
Part Number
120-1028
Qty.
1
Parts List
A
CINDER BLOCK OR
CONCRETE BLOCK WALL
SUPPORT
ARM
Drills 5/16" dia. hole all the way thru concrete or
cinder bock. Then attach support arm (not pro-
vided) to wall using back-up wall plate (A) and
fasteners (not provided). Note: See instructions of
wall arm for recommended mounting locations.
M A X. L O A D C A P A C I T Y
150 lb (68.2 kg)
A
• Installer must verify that the wall and mounting hardware (to be provided by installer) can safely support the
combined weight of the attached TV Bracket, accessories, and electronic equipment (TV, VCR, etc.).
• This Back-Up Wall Plate is intended for use only with TV Brackets designed and manufactured by Peerless.
Screws for attachment of TV Bracket to Back-Up Wall Plate are not included. Screws for attachment of Back-up
Wall Plate to wall must be provided by installer.
WARNING
/