Polti VAPORELLA PRO 4100 R Owner's manual

Category
Steam ironing stations
Type
Owner's manual
Dear Customer,
Thank you for the confidence you have placed in POLTI
in buying this product. Before using it, we recommend that you fol-
low the operating instructions closely.
VAPORELLA PRO 4100 R is one of the latest generation of profes-
sional irons. Our team of design engineers has equipped it with fea-
tures to make it work even more safely and efficiently:
The patented safety cap, a result of POLTI’s technology, which pre-
vents the device being opened (including by accident) if there is the
slightest pressure inside it.
The 0.9 litre capacity generator is made of Extra Al-P, a special alu-
minium alloy which guarantees its long life and prevents limescale
build up.
The steam pressure can be varied at will with fingertip control from
0 to 50 gr./min.
Vaporella is equipped with a safety valve, a safety thermostat and
an additional thermostat which prevents operation of the machine
when it is empty, and which maintains Vaporella in an absolutely
safe condition at all times.
This unit conforms with EC-directives 89/336 as amended
by 93/68 (EMC) and 73/23 as amended by 93/68
(low voltage).
ENGLISH
TECHNICAL DATA
Supply 230V - 50 Hz
Boiler power consumption 1000 W
Iron power consumption 750 W
Nominal boiler capacity 0.9 l
Ironing time ~ 1.5 h
Weight ~ 5.5 Kg
Dimensions cm 35 x 24 x 27
Polti S.p.A. reserves the right to change equip-
ment or accessory specification without prior
notice.
A) Patented safety cap
B) Generator on/off switch (illuminated)
C) Iron on/off switch (illuminated)
D) Power supply cable
E) Monoflex (power and steam)
F) Heat resistant iron rest
G) Iron temperature control
H) Steam on/off button
J) Continuous steam jet button
I) Funnel
L) Steam flow regulator
ENGLISH
PP
PP
LL
LL
EE
EE
AA
AA
SS
SS
EE
EE
RR
RR
EE
EE
AA
AA
DD
DD
TT
TT
HH
HH
EE
EE
FF
FF
OO
OO
LL
LL
LL
LL
OO
OO
WW
WW
II
II
NN
NN
GG
GG
BB
BB
EE
EE
FF
FF
OO
OO
RR
RR
EE
EE
UU
UU
SS
SS
EE
EE
Before using your Vaporella carefully read these usage instructions.
Before connecting Vaporella to the mains make sure that the current is the same as
indicated for the machine and that the plug is an earthed plug.
Do not introduce any detergent or chemical substance into the generator tank.
If your tap water is very hard, please use our special decalcifier TP 2000
PROGRESSO CASA with a natural basis, which is sold in all Polti services.
Do not use in any case distilled water.
Switching on the appliance, be sure that the button for continuous steam jet has not
been activated.
Do not refill the tank while it is still hot, allow it to cool down for a few minutes before
refilling.
During filling and refilling we recommend you to disconnect the appliance from the
mains supply.
Never empty Vaporella when the water inside the generator tank is still hot.
Do not place the appliance in water or in any other liquids.
Do not touch the appliance with wet hands or feet whilst the appliance is connected
to the mains.
Never leave the appliance unattended whilst it is connected to the mains.
Do not allow Vaporella to be used by children or by people who are not familiar with
the usage instructions.
We recommend that the appliance is disconnected from the mains whenever it is not
in use.
ENGLISH
PP
PP
RR
RR
EE
EE
PP
PP
AA
AA
RR
RR
AA
AA
TT
TT
II
II
OO
OO
NN
NN
FF
FF
OO
OO
RR
RR
UU
UU
SS
SS
EE
EE
1. Unscrew the patented safety cap (A) and fill the boiler
with about 0.9 litres of ordinary tap water using the
special funnel (I) making sure that it does not overflow
(fig. 1).
2. Retighten the cap fully and carefully.
3. Connect the power supply cable (D) into an earthed
power supply of the correct voltage (230V - 240V).
4. Switch on the boiler and iron by pressing the switches
(B) and (C) which will light up (fig. 2).
II
II
NN
NN
SS
SS
TT
TT
RR
RR
UU
UU
CC
CC
TT
TT
II
II
OO
OO
NN
NN
SS
SS
FF
FF
OO
OO
RR
RR
UU
UU
SS
SS
EE
EE
5. Set the iron temperature to the “COTTON - LINEN” steam
position (fig. 3), by turning the knob (G). All types of fab-
ric can be ironed at this temperature.
When dry ironing, set the knob (G) to the required tem-
perature for the fabric, shown on the rotating indicator.
Fig. 1
Fig. 2
Fig. 3
II
II
MM
MM
PP
PP
OO
OO
RR
RR
TT
TT
AA
AA
NN
NN
TT
TT
Before leaving our factory all our products are rigorously tested. For this rea-
son your Vaporella contains a small quantity of water and on first use we
recommend that you do not add further water until all existing water in the tank
has been exhausted and allowed to escape as steam.
ENGLISH
6. Wait for the generator on/off switch (B) to go out (about
10 minutes). Push button (H) on the iron to release bursts
of steam from the holes on the soleplate. Release the
button and the steam will stop (fig. 4).
NOTE: during initial operation of the iron, a few drops
of water mixed with steam may come out of the soleplate
until the temperature stabilises. It is advisable to direct
the first jets of steam onto an old cloth until a uniform
stable jet of steam is obtained.
7. In order to have a continuous steam jet, press the button
(J). Steam will keep on coming out, even releasing the
button. To interrupt the outlet press button (H) (fig. 5).
8. By turning the steam flow control knob (L) you can vary
the amount of steam according to the type of textile to
be ironed (more or less delicate). You can use this con-
trol to increase the steam flow by turning in anti-clock-
wise direction. Turning the control in a clockwise direc-
tion reduces the steam flow (fig. 6).
Fig. 4
Fig. 5
Fig. 6
+
ENGLISH
PP
PP
AA
AA
TT
TT
EE
EE
NN
NN
TT
TT
EE
EE
DD
DD
SS
SS
AA
AA
FF
FF
EE
EE
TT
TT
YY
YY
CC
CC
AA
AA
PP
PP
//
//
WW
WW
AA
AA
TT
TT
EE
EE
RR
RR
OO
OO
UU
UU
TT
TT
All Polti machines are equipped with the unique Polti patented safety cap, which prevents
opening of the generator tank as long as there is any pressure remaining inside the tank.
This is an important and indispensable safety device, and it is necessary to follow certain
procedures when re-filling the tank.
Whenever when you have used up all the water in the tank, do as follow :
1a. Switch off the machine at the generator on/off switch (B).
2a. Press the steam request button on the iron (H) so as to fully exhaust the steam
supply from the tank.
3a. Disconnect the power supply cable (D) from the mains.
4a. Unscrew anti-clockwise the patented safety cap (A).
5a. Wait 3 or 4 minutes to allow the generator tank to cool down.
6a. When cool proceed to carefully refill the tank as described in paragraph 3 of the sec-
tion “PREPARATION FOR USE” in the instructions. If refilling the generator when not
completely cooled, we recommend that you carefully pour only very small quantities
of water at each pouring into the tank, so as to avoid spitting from the tank.
II
II
MM
MM
PP
PP
OO
OO
RR
RR
TT
TT
AA
AA
NN
NN
TT
TT
Do not leave the iron unattended whilst connected to the mains.
Iron only on heat resistant surfaces and on surfaces that allow the steam to escape
e. g. mash ironing boards.
Ensure the patented safety cap is fully and correctly screwed on, otherwise you may
experience steam escaping from around the cap.
The generator on/off switch (B) may go on and off from time to time during use of
Vaporella. This indicates the machine maintaining the correct and constant pressure
and is quite normal.
If no steam is released from the iron, check the following: there is water in the boiler;
the steam control switch (L) is set to one of the “Steam” settings.
If repairs or replacement parts are required, and in particular the special safety cap,
use only original Polti replacement parts.
The appliance is fitted with a safety thermostat, which should only be replaced by an
authorised technician.
If it is necessary to replace the power supply cable, please refer to the nearest Polti
authorised service centre, since the use of special tool is necessary.
In the case of breakdown or malfunction do not attempt to repair the
appliance yourself but refer to your nearest authorised service centre.
ENGLISH
CC
CC
AA
AA
RR
RR
EE
EE
OO
OO
FF
FF
YY
YY
OO
OO
UU
UU
RR
RR
VV
VV
AA
AA
PP
PP
OO
OO
RR
RR
EE
EE
LL
LL
LL
LL
AA
AA
Before attempting any maintenance operation, be sure to always disconnect
the appliance from the mains.
To maintain efficient performance, we recommend emptying and flushing out the
generator with tap water at least once a month; this operation flushes away the scale
deposits inside the generator. Never empty the Vaporella when the water in the
generator is still hot.
To clean the body of the appliance, simply use a moist cloth. Do not use solvents or
detergents which may harm the body material.
GG
GG
UU
UU
AA
AA
RR
RR
AA
AA
NN
NN
TT
TT
EE
EE
EE
EE
The Vaporella is guaranteed to the original purchaser for one year from purchase date
against manufacturing or raw material defects. The guarantee is not valid if the appliance
has been misused in any way. Unauthorised alterations or repairs to the machine will auto-
matically invalidate this guarantee.
Polti declines liability for any damage or accident derived from any use of
Vaporella which is not in conformity with the instructions contained in this
booklet.
ENGLISH
HH
HH
OO
OO
WW
WW
TT
TT
OO
OO
AA
AA
CC
CC
HH
HH
II
II
EE
EE
VV
VV
EE
EE
PP
PP
EE
EE
RR
RR
FF
FF
EE
EE
CC
CC
TT
TT
II
II
RR
RR
OO
OO
NN
NN
II
II
NN
NN
GG
GG
To achieve perfect ironing using conventional irons, you have to iron the fabric several
times with the hot iron to dry all residual moisture. The Stiro Professional Vaporella,
the revolutionary New-Concept professional ironing board by Polti, is heated and incor-
porates a vacuum-press for effortless professional results.
Perfect ironing is dependent on these two characteristics: the suction which locks the gar-
ment on the board, so preventing the formation of annoying wrinkles which are so diffi-
cult to eliminate on conventional ironing boards, and the heated board which dries the
fabrics and makes ironing easier, faster and less laborious.
The Stiro Professional Vaporella offers high comfort during ironing:
• a solid, strong, height adjustable metal structure
• a large working surface
• a space-saving boiler holder under the board
• minimum dimensions when folded.
ASK YOUR LOCAL DEALER FOR A DEMONSTRATION OF STIRO PROFESSIONAL
VAPORELLA - HE’LL BE GLAD TO INTRODUCE YOU TO PERFECT IRONING.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44

Polti VAPORELLA PRO 4100 R Owner's manual

Category
Steam ironing stations
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI