2. Computers & electronics
  3. Computer cables
  4. DisplayPort cables
  5. Extron electronics
  6. DPH 101

Extron electronics DPH 101 User manual

  • Hello! I am an AI chatbot trained to assist you with the Extron electronics DPH 101 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
IMPORTANT:
Refer to www.extron.com for the complete
user guide, installation instructions, and
specifications before connecting the
product to the power source.
IMPORTANT:
Go to www.extron.com for the complete
user guide, installation instructions, and
specifications before connecting the
product to the power source.
DPH 101 • Setup Guide
The Extron DPH 101 provides connectivity between DisplayPort equipped sources and HDMI
sink devices. Follow these instructions to install the DPH 101.
Cabling
DPH 101
HDMI OUT
SIG
12V
0.2 A MAX
POWER
DPH
101
SIG
DP IN
1
Rear Front
2 3
1
Power connector − Wire the
power supply as shown at right and
connect it to the power connector.
The DPH 101 can share power with
an Extron switcher or similar device
(see the wiring diagram, Figure 1).
PS 1210 C
DPH 101
SW4 HDMI
12V
0.2 A MAX
POWER
DPH
101
SIG
DP IN
0.5A MAX
POWER
12V
1
Tx Rx
1234+V
1234G
RS-232 AUTOCONTACT
TALLY OUT
SW4 HDMI
234
INPUTS OUTPUT REMOTE
DC Power
Output
DC Power
Shared
Figure 1. Sharing Power with an Extron Switcher
2
DP input − Connect a dual-mode DisplayPort input device to the DP input.
3
HDMI output − Connect an HDMI output device to the HDMI output.
12V
0.2 A MAX
POWER
DPH
101
SIG
DP IN
DPH 101
HDMI OUT
SIG
Rear
Front
A
B
C
12V
0.2 A MAX
POWER
DPH
101
SIG
DP IN
DPH 101
HDMI OUT
SIG
Rear
Front
A
B
C
SECTION A–A
Ridges
Smooth
Power Supply Output Cord
A
A
3/16”
(5 mm) Max.
LED Indicators
A
SIG LED (rear) − Lights up to indicate
signal presence on the DisplayPort input.
B
Power LED − Lights up to indicate power.
C
SIG LED (front) − Lights up to indicate
signal presence on the HDMI output.
Mounting
Use the included hook and loop tape to attach the DPH 101 to the application surface.
Application Diagram
The following is a typical application diagram for the DPH 101.
12
V
0.
2
A
MA
X
POWE
R
D
PH
101
SI
G
DP
I
N
Cable Retractable
System
Cable Cubby
Laptop
0.3
A
MA
X
POWER
12
V
1
2
3
4
INPUTS
OUTPUT
Tx Rx
RS-
232
AUTO
REMOTE
1 2 3
4 G
CO
NTACT
1 2 3
4
+v
TALLY OUT
DPH 101
HDMI OUT
SIG
Blu-ray
SW4 HDMI
Switcher
Extron
DPH 101
DPH 101
HDMI Cables
HDMI Display
DisplayPort
Cable
68-2656-50
Rev. A
11 14
Extron Headquarters
+1.800.633.9876 (Inside USA/Canada Only)
Extron Asia
+65.6383.4400
Extron China
+86.21.3760.1568)
Extron Korea
+82.2.3444.1571
Extron Europe
+31.33.453.4040
Extron Japan
+81.3.3511.7655
Extron Middle East
+971.4.299.1800
Extron India
+91.80.3055.3777
© 2014 Extron Electronics — All rights reserved. All trademarks mentioned are the property of their respective owners. www.extron.com
NOTE: In order for the DPH 101 to operate in the system, the DisplayPort source (laptop
or desktop PC) must be a dual mode DisplayPort device. Dual mode DisplayPort devices
are marked with the
logo.
/