Bunn BrewWISE User manual

Brand: Bunn

Model: BrewWISE

Category: Coffee making accessories

Type: User manual

This manual is also suitable for

USE & CARE INSTRUCTIONS for BrewWISE

System

(Includes G92T DBC Grinder and DUAL SH DBC Brewer with Smart Funnel™)

STEP 1

STEP 2 STEP 3 STEP 4

34481 011403

Select the desired batch

size and coffee flavor on

the grinder. It is not nec-

essary to select a size on

the brewer.

Discard the grounds and

filter when brewing is com-

pleted.

Momentarily press and re-

lease the BREW button.

Place an empty server un-

der the funnel.

Slide funnel into the fun-

nel rails. The brewer reads

the batch size and flavor

ground through a chip in

the funnel handle and will

automatically select the

correct settings to brew.

Grind the proper amount

of fresh coffee into the

Smart Funnel™ using the

G92-HD with Smart Fun-

nel™ operation.

Insert a BUNN

filter into

the funnel.

A batch size must be cho-

sen at the brewer when

grounds are not obtained

from a Smart Funnel™

compatible grinder.

STEP 5

STEP 6 STEP 7

STEP 8

STEP 9 STEP 10

Level grounds by gently

shaking.

Press the ON/OFF button

to ON.

STEP 2

STEP 4

Clean mineral deposits and

rinse. Using a paper clip,

make sure all holes are

open. Replace sprayhead.

STEP 1

Remove the sprayhead.

STEP 5

Use a clean damp cloth

rinsed in nonabrasive,

mild detergent to clean all

surfaces.

Remove the lid of the

server.

STEP 3

Reinstall the sprayhead.

CLEANING

BUNN

COFFEE BREWING

34481 011403

STEP 6

STEP 8STEP 7 STEP 9 STEP 10

STEP 12 STEP 14STEP 11 STEP 15

Unscrew the inlet cap.

Pull out lid assembly.

Clean inlet tube with the

medium sized brush (BOM

#00675.0000) and clean-

ing product solution.

Rinse well. Reassemble

the lid making sure to re-

place the retainer cap.

Clean the sight gauge with

the large brush (BOM

#00674.0000) and reas-

semble.

Remove the glass tube.

Make sure reservoir is

empty and unscrew the

sight gauge cap.

Use a clean damp cloth

rinsed in nonabrasive,

mild detergent to clean all

surfaces.

Thoroughly rinse entire

inside of the server. DO

NOT immerse server in

water.

STEP 13

Reinstall glass tube and

the sight gauge cap.

Use a small brush (BOM

#00674.0000) to thor-

oughly scrub the faucet

shank.

Allow the parts to soak in a

sanitizer solution for a mini-

mum of ten minutes. Re-

move the faucet parts from

the sanitizer solution and

rinse thoroughly. Allow

parts to air dry over night.

Transfer these parts to a

three compartment sink

for cleaning. Fill the first

sink with a soap solution

using a mild detergent, the

second sink with a sani-

tizer solution (75°F warm

chlorine solution of at least

50-100 ppm) and the third

sink is used for clean rinse.

STEP 16

STEP 17 STEP 18 STEP 19 STEP 20

Turn the faucet wing nut

in a clockwise direction

and remove the faucet

from the dispenser. Un-

screw the faucet cap from

the faucet body and dis-

assemble all faucet parts.

Use a small brush (BOM

#00674.0000) to thor-

oughly scrub the faucet

body.

CLEANING (Continued)

USE & CARE INSTRUCTIONS for BrewWISE

System

(Includes G92T DBC Grinder and DUAL SH DBC Brewer with Smart Funnel™)

BUNN

Bunn BrewWISE User manual

Brand: Bunn

Model: BrewWISE

Category: Coffee making accessories

Type: User manual

This manual is also suitable for

Download PDF

report

Bunn BrewWISE User manual

This manual is also suitable for

Bunn BrewWISE User manual

Related papers

Other documents