2. Computers & electronics
  3. Audio & home theatre
  4. MP3/MP4 players
  5. Docking speakers
  6. Pyle
  7. PIH20
PIH20

Pyle PIH20, PIH30R Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Pyle PIH20 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
iPod wireless headphone PIH20 / PIH30R
INSTRUCTIONS
The wireless Headphone PIH20/PIH30R for iPod use advanced 915MHz ultra high frequency technology for
crystal clear audio.
This wireless headphone system comprises of a wireless headphone and an iPod
dock transmitter which also functions as an 'easy-charge' cradle and docking station for iPods. The
PIH20/PIH30R utilizes RF wireless audio transmission, offering an effective range of 150 feet (line of
sight), and can serve up to several headphones.
Auxiliary connection lets you listen to non-docking iPod models, MP3 /CD/DVD/TV or any audio systems.
PIH30R offers a remote control, so you can adjust the volume, play, pause, mute or select tracks without
touching your iPod or iPhone.
Please take a few moments to read these instructions carefully, as we want you to enjoy your new Pyle
product quickly and to the full.
System components and connections
- 1 headphone - 1 iPod transmitter - 1 remote control (included with PIH30R) - 1 power supply
- 1 3.5mm stereo jack detachable audio cable - 1 instruction manual - 1 Warranty letter
Where to place the transmitter
Do not place the transmitter close to metal objects such as shelf bars, reinforced concrete walls, etc.
If there is no audio signal for about 4 minutes, the transmitter automatically switches off. The transmitter
is now in stand-by mode, its power consumption is very low so that it can remain connected to the
mains.
Pressing the headphone receiver on/off
The TUNE/ON/OFF button is on the right earpiece.
Make sure to turn off the headphones after each use.
Adjusting the volume
Set the volume of your sound source to a medium value.
With some devices, the volume for the headphone
output can be regulated separately. Use the VOLUME
control on the right earpiece to adjust the headphones
volume.
Changing the receiver channel
Press the ON/OFF button on the right earpiece until you
can hear the audio signal loud and clear. Your
headphones start on 1CH. Tap the power button to set
to 2CH. Tap again for 3CH. Tapping again will reset to
1CH, and so on.
Changing the transmission channel
To avoid interference caused by the simultaneous
operation of several transmitters, select a different channel on each transmitter. Depending on the
system variant, two or three switchable transmission channels are available.
Complete freedom of movement
It is not necessary that transmitter and headphone receiver are in a direct line of sight, so you can move
around freely in the home or outside in the garden. One transmitter can be used to transmit to several
receivers on the same frequency.
The iPod dock transmitter can charge the iPods if it is power supplied by AC adapter.
Some operating features
1. Audio Out Function: The transmitter can output the signal from docking iPod or AUDIO-IN connection.
2. The iPod dock transmitter can work with 4*AAA batteries, when using an external 5V DC power supply,
the internal batteries power will automatically cut off, and the external 5V DC power supply can charge
the iPod.
3. Audio input can choose the signal from iPod socket or AUDIO-IN, however, priority is AUDIO-IN. When
playing music with iPod socket, the AUDIO-IN connection should be disconnected at first.
4.
PIH20: The transmitter will automatically enter sleeping mode to save power if the transmitter detects no
audio input signal or iPod (or MP3, TV, VCD and other audio systems) volume is turned down to very
low level for more than 4 min. To leave sleeping mode, just put the iPod into the iPod socket or connect
your audio systems to the transmitter.
PIH30R: The transmitter will automatically enter sleeping mode to save power if the transmitter detects
no audio input signal or iPod (or MP3, TV, VCD and other audio systems) volume is turned down to very
low level for more than 4 min. To leave sleeping mode, just press the power button of remote control or
restart the power.
5. The remote control of PIH30R is used for controlling the iPods only. You can adjust the volume, play,
pause, mute or select tracks without touching your iPod. But the remote control is not workable to MP3,
TV, VCD or other audio systems.
ATTENTION: LISTENING AT HIGH VOLUME LEVELS FOR LONG PERIODS CAN PERMANENTLY
DAMAGE YOUR HEARING.
This device has been designed for iPods not iPhones. If you play it with iPhones, you may hear some
noise when a call comes in. Please take care of your ears.
Are all connections properly made?
Are the headphones and sound source switched on and is the volume correctly adjusted?
Are you too far from the transmitter? (if so, move closer)
Choose a different channel.
Adjust the setting with the TUNE control.
Technical data
System UHF/RF
Modulation FM, stereo
Power supply of Transmitter DC 5V 600mA or 4 x 1.5V AAA batteries
Power supply of Headphone
2 x 1.5V AAA batteries
Power supply of remote control 3V Button battery (required for PIH30R)
Transmit power 5mW
Signal-to-noise ratio >75 dB
3 Channels for selection
914MHz,914.5MHz,915MHz
Channel separation
>35dB
Frequency response 30 - 20,000Hz
Distortion <1%
www.pyleaudio.com
/