2. Unbranded
  3. HD59-3140

Unbranded HD59-3140 Installation guide

  • Hello! I've reviewed the installation instructions for Kissler's 59-3140 and 759-3140 sink strainer assemblies. The document provides step-by-step guidance, from cleaning the sink opening to checking for leaks after tubular drain installation. I'm ready to answer your questions about the installation process.
  • What is the first step in the installation process?
    What should be done after inserting the basket strainer assembly?
    What should be done after hand-tightening the 3 screw strainer nut?
Installation Instructions for
59-3140 and 759-3140
Step 3
Step 1
Step 2
Step 4
Below the sink, place the rubber washer,
the plastic friction washer, then the
galvanized retainer ring into place.
Then screw the 3 screw strainer nit
onto the assembly and hand-tighten.
Clean the sink opening with a
scrubbing sponge.
Insert the basket strainer assembly into
the hole and press firmly into place.
Using a screwdriver or pliers, tighten the
bolts alternating between the 3, until the
flange makes contact with the sink rim.
Remove the excess Perfect Putty from
the top of the sink and wipe with
scrubbing sponge.
You are now ready to install the tubular drain.
After tubular drain installation, check for leaks.
Step 5
Step 6
Step 7
/