KISSLER and CO HD59-3005 Installation guide

Installation Instructions for

59-3005 and 759-3005

Step 3

Step 1

Step 2

Step 4

Below the sink, place the rubber washer,

then the plastic friction washer into place.

Then screw the strainer nut onto the

assembly and hand-tighten.

Clean the sink opening with a

scrubbing sponge.

Insert the basket strainer assembly into

the hole and press firmly into place.

While holding the assembly and keeping

it from turning, use a strainer nut wrench

to tighten the nut until the flange makes

contact with the sink rim.

Remove the excess Perfect Putty from

the top of the sink and wipe with

scrubbing sponge.

You are now ready to install the tubular drain.

After tubular drain installation, check for leaks.

Step 5

Step 6

Step 7