Unbranded HD59-3140 Installation guide

Installation Instructions for

59-3140 and 759-3140

Step 3

Step 1

Step 2

Step 4

Below the sink, place the rubber washer,

the plastic friction washer, then the

galvanized retainer ring into place.

Then screw the 3 screw strainer nit

onto the assembly and hand-tighten.

Clean the sink opening with a

scrubbing sponge.

Insert the basket strainer assembly into

the hole and press firmly into place.

Using a screwdriver or pliers, tighten the

bolts alternating between the 3, until the

flange makes contact with the sink rim.

Remove the excess Perfect Putty from

the top of the sink and wipe with

scrubbing sponge.

You are now ready to install the tubular drain.

After tubular drain installation, check for leaks.

Step 5

Step 6

Step 7