Topeak TWSC01 Owner's manual

Brand: Topeak

Model: TWSC01

Type: Owner's manual

Art no. TWSC01

WEIGHT SCALE

digital display

for PrepStand

User's Guide

INSTALLATION OF WEIGHT SCALE ON PREPSTAND

Repair & storage solutions

PrepStand Series

for

WEIGHT SCALE

digital display

Size: (LxWxH)

5.4" x 2.5" x 1"

Weight: 240 grams

Repair & storage solutions

QUICK START MANUAL

Ready to weigh/

weight completed

indicator

Negative indicator

Low battery indicator Digital display

screen

Scale

Display screen

On/Off/Reset

Unit selection

WEIGHT SCALE

Measured data from the Topeak

weight scale is for personal

reference only and cannot be

used for other purposes.

BE AWARE

On Press

Off Press and hold for 3 seconds.

Unit Selection Press kg lb

Reset Press when unit is on.

Auto-off Display screen will shut off automatically

after 3 minutes of inactivity.

NOTE:

1. Maximum weight capacity is 25 kilograms (55lbs), accuracy tolerance: 20 grams.

2. The Weight Scale is water resistant, however, care should be taken when used in wet

environments. The Weight Scale should never be submerged in water.

3. When cleaning the Weight Scale, use only a damp cloth to remove excess dirt. Never use

compressed air to clean the Weight Scale.

PrepStand Series

for

WEIGHT SCALE

digital display

Weight units

OPERATION:

(Screws -

M4 x 0.7mm x L20

Supplied)

Screw Holes

(Screws -

M4 x 0.7mm x L20

Supplied)

Screw Holes

PREPSTAND WITH WEIGHT SCALE WEIGHT MEASUREMENT

Topeak products are available only from professional bicycle shops.

Please contact your nearest Topeak authorized bicycle dealer for any questions.

For customers in the USA, call: 1-800-250-3068 Website: www.topeak.com

1. Press on button to turn on the weight scale.

The screen will display:

2. Wait for a few seconds until ready to weigh indicator appears.

The screen will display:

3. Press unit selection button to choose your desired weight unit.

4. Place item to be weighed on the scale as shown on right.

5. Read indicated weight.

Kg lb

MEASURE PROCEDURE

1. Open battery cover.

2. Replace batteries. Be sure positive and

negative sides of batteries are inserted correctly

when replacing.

CHANGING BATTERIES (CR2032 x 2 pcs)

Repair & storage solutions

PrepStand Series

for

WEIGHT SCALE

digital display

IMPORTANT

The specifications and design are subject to

change without notice.

1. In order to weigh accurately, the

supporting legs should be on flat

ground and the weight scale facing

up in a vertical position. Make sure

the item being weighed is not

touching the Prepstand.

2. Accuracy tolerance of this weight

scale is 20 grams. When the

weight scale is not facing up in a

vertical position, the error tolerance

will increase. Reposition the scale to

face up a vertical position and reset

the unit by pressing the reset button

3. Measured data from the Topeak

weight scale is for personal

reference only and cannot be used

for other purposes.

LIMITED WARRANTY

Warranty Claim Requirements

To obtain warranty service, you must have your

original sales receipt. Items returned without

a sales receipt will assume that the warranty

begins on the date of manufacture. All

warranties will be void if the Weight Scale is

damaged due to user abuse, overweight

measurements, system alteration, modification,

or used in any way not intended as described

in this operating manual.

M-TWSC01-GB 7/05

1-year Warranty: All mechanical components

against manufacturer defects only. Batteries are

not covered under any implied warranty.

Topeak TWSC01 Owner's manual

Topeak TWSC01 Owner's manual

Topeak TWSC01 Owner's manual

Related papers

Other documents