2. Benjara
  3. BM273196

Benjara BM273196 Operating instructions

  • Hello! I have reviewed the assembly instructions for the BM273196 chair. This document outlines the necessary steps and precautions for assembling your new chair, including the parts list and proper tightening procedures. I'm here to answer any questions you may have about the assembly process or features of your chair.
  • What is the weight capacity of this chair?
    What should I do if the cushion gets wet?
    Can I use power tools to assemble the chair?
    What is the chair made of?
ASSEMBLY INSTRUCTIONS
(For BM273196)
1
Wrench
Parts List
Pieces Schema Description QTY
4
8
4
Screw
Flat washer
Lock washer
4
Nut
A
B
C
D
G
(M8 *35)
(M8 )
(M8 )
(M8 )
H
I
J
K
Seat
Base
Seat Cushion
1
1
1
Made in China
ENut cap 4
Foot Leveler
1. Please read these instructions carefully before assembly.
2. Aluminum is soft metal over tighten may strip threads or break the part.
3. DO NOT use power tools.
4. Check parts against the parts list to make sure you have all parts needed for
proper assembly.
5.Familiarize yourself with the inventory of parts and the accompanying illustrations
to ensure safe and proper assembly.
This chair has a 275 lbs weight capacity.
Hang cushion over chair frame to dry if it gets wet to prevent mold/mildew.
WARNING!WARNING!
ATTENTION:ATTENTION:
4
I
J
Warning : DO NOT use acid or alkaline
washing liquid to clean the product.
K
H:This part have been assembled by
factory already.
Made in China
C
B
A
D
E
B
1.Place the base on a flat, solid surface.
Loosely attach the seat to the base.
Please using screws(A), flat washers(B),
lock washers(C), nuts(D) and nut caps(E).
2.Tighten all the bolts and nuts completely.
Use the adjuster feet to level the legs.
3.Put Cushion(K) on the unit(as shown in
the picture).
DO NOT OVER TIGHTEN
*
NO SOCKET DRIVERS
*
NO POWER TOOLS
*
/