Gigaset E630 A GO Owner's manual

Category
Mobile phones
Type
Owner's manual

This manual is also suitable for

Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / Cover_front_c.fm / 11/8/17
E630 A GO
You can find the most up-to-date
user guide at
www.gigaset.com/manuals
User guide online on your
smartphone or tablet:
Download the Gigaset Help app
Gigaset E630A GO / AU / A31008-M2725-C401-1-7619 / Cover_front_c.fm / 11/8/17
1
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / GO_intro.fm / 11/8/17
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Gigaset GO: For the fixed line network with a future
Make telephony at home flexible with this Gigaset GO phone. There are three connection
alternatives, as well as all the GO functions.
Making calls using the analogue fixed line network
Connect the phone to your analogue fixed line connection (PSTN). Plug the phone cable into the
fix
ed line connection. You can then
• Use the analogue line to make phone calls
• Use the integrated answer machine
• Use the other functions of your Gigaset phone (directory, call lists etc.)
Making calls over the Internet
Connect the phone to a router. In this case, ignore the phone cable and plug the network cable
in
to a LAN connection on your router. Register the phone with your internet telephony provider
(IP). With this connection, you can
• Make two calls at the same time
• Assign a separate number to each handset
• Make calls using different telephony providers
• Set up three answer machines with individual recording and advisory texts
• Use the other functions of your Gigaset phone (directory, call lists etc.).
Making calls using the analogue fixed line network and over the Internet
If you have both an analogue fixed line connection and an Internet connection, you can use the
func
tions of both connections, e. g. make a fixed line call and two I
nternet calls at the same time.
New functions of the Gigaset GO phones
In addition to the functions of previous analogu
e or IP phones, Gigaset GO phones also offer
further new options:
• Make calls between Gigaset GO phones across the world free of charge via Gigaset.net
• Display online services information, e. g. weather tickers or eBay messages
• Use online directories (not available in all countries)
• Use cloud services and smartphone apps for connecting between fixed line network
phones and smartphones: e. g. receive notifications on your smartphone if there is an
incoming call or a voice message on the GO phone at home or transfer smartphone
contacts to the GO phone
The range of functions is constantly updated.
Further information about Gigaset GO can be found at
www.gigaset.com/go
2
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Contents
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / LUG_GOIVZ.fm / 11/8/17
Contents
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Base station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 5
Illustration in the user guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 6
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 7
Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 8
Contents of the package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 8
Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 9
Changing the display language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 11
Base station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 11
Setting up an IP account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 13
Using the telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 17
Getting to know your telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 17
Making calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 20
Making calls via the Internet (VoIP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 25
Provider-specific functions (network services) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
28
Message lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 32
Call lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . 34
Local handset directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 35
Online directories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 39
Gigaset.net directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 41
Answer machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 43
Local answer machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 43
Network mailbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 48
Set fast access for the answer machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 49
Additional functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 50
Sound profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 50
Spot LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 51
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 51
Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 53
Baby monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 54
ECO DECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 55
Protection against unwanted calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 56
SMS (text messages) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 58
E-Mail notifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 65
Info Centre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 68
Expanding the functionality of the telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Multiple handsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 73
Repeater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 75
Operation with a PABX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 76
3
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / LUG_GOIVZ.fm / 11/8/17
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Contents
Adjusting the telephone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 86
Internet telephony (VoIP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 90
Web configurator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 93
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 109
Customer service & product warranty – Australia and New Zealand . . . . . . . . . . . . . . . . . . . . 109
Manufacturer's advice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 114
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 116
Display icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 118
Menu overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 120
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Open Source Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Not all functions described in the user guide are available in all countries or from all
network providers.
4
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / overview_1 _GO.fm / 11/8/17
3
5
6
9
16
2
15
13
INT 1
Calls Calendar
4
14
7
12
1
11
8
10
A
5
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / overview_2_GO.fm / 11/8/17
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Overview
Overview
Handset
Base station
1Spot LED ( p. 51) /
Visual call signal ( p. 83)
2Display
3 Status bar ( p. 118)
Icons display current settings and operating
status of the phone
5Display keys ( p. 18)
Various functions, depending on the operating
situation
6 End call key, On/off key
End call; cancel function;
Go back one menu level Press briefly
Return to idle status Press and
hold
Switch the handset on/off
(in idle status)
Press and
hold
7Message key ( p. 32)
Access to the calls and message lists;
Flashes: new message or new call
8 Profile key
Switch between sound profiles
9Hash key
Lock/unlock the keypad
(in idle status)
Press and
hold
Toggle between upper/lower
case and digits
(when inputting text)
Press briefly
10 Headset connection
(2.5 mm jack)
11 Microphone
12 Star key
Open special characters table
(when inputting text)
Press briefly
13 Key 1
Select answer machine/
network mailbox
Press and
hold
14 Recall key
Consultation call (flash) Press briefly
Insert a dialling pause Press and
hold
15 Talk key / Handsfree key
Accept call; select displayed number; send SMS
(when composing an SMS)
Switch between earpiece and speaker mode
Open the redial list Press briefly
Start dialling Press and
hold
16 Control key / Menu key ( p. 17)
Open a menu; navigate in menus and entry
fields; access functions (depending on the situa-
tion)
A Registration/paging key
Locate a handset (paging);
Show IP address on handset
Press briefly
Register handset Press and
hold
Illuminated: LAN connection active (phone is
connected to router)
Flashes: Base station in registration mode
6
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Illustration in the user guide
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / user_guide_operating_steps.fm / 11/8/17
Illustration in the user guide
Keys
Procedures
Example: Switching Auto answer on/off
Warnings, which, if not heeded, can result in i
njury to persons or damage to devices.
Important information regarding function and appropriate handling or functions
that could generate costs.
Prerequisite for being able to carry out the following action.
Additional helpful information.
or Talk key or Handsfree key
End call key to Number / letter keys
/ Control key rim / centre Message key
Recall key Star key
Hash key Profile key
OK, Back, Select, Change, Save, . . . Display keys
¤ . . . use to select Settings OK Telephony OK Auto Answer
Change ( = on)
Step Follow this procedure
¤ When in idle status press the centre of the control key.
The main menu opens.
¤
¤ OK
Navigate to the icon using the control key .
Select OK to confirm. The submenu Settings opens.
¤ Telephony
¤ OK
Select the Telephony entry using the control key .
Select OK to confirm. The submenu Tele ph ony opens.
¤ Auto Answer The function to switch Auto answer on/off appears as the first menu
item.
¤ Change Select Change to activate or deactivate.
Function is activated /deactivated .
7
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / security.fm / 11/8/17
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Safety precautions
Safety precautions
Read the safety precautions and the user guide before use.
The device cannot be used in the event of a power failure. It is also no
t possible to
transmit emergency calls.
Emergency numbers ca
nnot be dialled if the keypad/display lock is activated!
Use only r
echargeable batteries that correspond to the specification (see list of permit-
ted batteries
www.gigaset.com/service). Never use a conventional (non-rechargea-
ble) battery or other battery types as this coul
d result in significant health risks and per-
sonal injury. Rechargeable batteries, which a
re noticeably damaged, must be replaced.
The handset must not be operated if the battery cover is open.
Do not use the devices in environments with a potential explosion hazard
(e
.g., paint shops).
The base and charger are not splashproof. For this r
eason do not install them in a damp
environment such as bathrooms or shower rooms.
Use only the power adapter indicated on the device.
Whilst charging, the power socket must be easily accessible.
Remove faulty devices from use or have them repaired by our Service team, as these
c
ould interfere with other wireless services.
Do not use the device if the display is cracked o
r broken. Broken glass or plastic can cause
injury to hands and face. Send the device to our Service department to be repaired.
Do not hold the rear of the handset to your ear when it is ringing or when speaker mode
is ac
tivated. Otherwise you risk serious and permanent damage to your hearing.
The phone may cause interference in analogue hearing
aids (humming or whistling) or
cause them to overload. If you require assistance, please contact the hearing aid sup-
plier.
Using your telephone may affect nearby medical equipment. Be aware of the technical
conditi
ons in your particular environment, e.g., doctor's surgery.
If you use a medical device (e.g., a pacemaker)
, please contact the device manufacturer.
They will be able to advise you regarding the susceptibility of the device to external
sources of high frequency energy (for the specifications of your Gigaset product see
"Technical data").
8
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Getting started
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / starting_GO.fm / 11/8/17
Getting started
Contents of the package
• One base station,
• One power adapter for the base station,
• One phone cable,
• One LAN cable,
• One handset,
• One charging cradle incl. power adapter,
• One battery cover (rear cover for the handset),
• One locking disc for the battery cover,
• Two batteries,
• One belt clip,
• One rubber cover for the headset socket,
• One user guide
Models with multiple handsets, per handset:
• One handset,
• One charging cradle incl. power adapter,
• Two batteries, one battery cover, one locking disc, one rubber cover and one belt clip
The base station and charging cradle are designed for use in closed, dry rooms within
a temperature range of +5 °C to +45 °C.
The device's feet do not usually leave any marks on surfaces. However, due to the mul-
titude of different varnishes and polishes used on furniture, contact marks on the sur-
faces cannot be completely ruled out.
Never expose the telephone to heat sources, direct sunlight or other electrical
devices.
Protect your telephone from moisture, dust, corrosive liquids and vapours.
9
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / starting_GO.fm / 11/8/17
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Handset
Handset
Connecting the charging cradle
¤ Connect the flat plug of the power
adapter .
¤ Plug the mains unit into your power
socket .
To remove the plug from the charging cradle
again:
¤ Disconnect the power adapter from the
mains power supply.
¤ Press the release button .
¤ Pull out the plug .
Setting up the handset for use
The display is protected by a plastic film. Please remove the protective film!
Inserting the batteries
¤ Insert the batteries (for correct +/- direction,
see diagram ).
¤ Hold the battery cover at a slight angle and insert
the bottom into the casing first .
¤ Press the cover until it clicks into place.
¤ Insert the locking disc as shown (at an angle of
approx. 20°) . Pay attention to the arrow
markings.
2
1
3
4
1
2
3
4
Only use rechargeable batteries, as this could otherwise result in significant health
risks and personal injury. For example, the outer casing of the batteries could be
destroyed or the batteries could explode. The device could also malfunction or be
damaged as a result of using batteries that are not of the recommended type.
2
3
4
1
1
2
3
4
10
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Handset
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / starting_GO.fm / 11/8/17
¤ Turn locking disc clockwise to the end stop .
The locking disc is closed once the markings on
the disc are aligned with those on the cover .
Re-opening the battery cover
¤ Turn the locking disc anti-clockwise to the end
stop (approx. 20°) and remove .
¤ Place your fingernail in the notch on the side
between the cover and the casing . Remove
the cover .
Charging the batteries
¤ Charge the batteries fully prior to first use in the
charging cradle.
The batteries are fully charged when the power icon
disappears from the display.
Attaching the belt clip
The handset has notches on each side for attaching
the belt clip.
• Attaching the belt clip: Press the belt clip onto
the back of the handset so that the tabs on the
belt clip click into place in the notches.
• Removing the belt clip: Press the centre of the
belt clip firmly with your right thumb. Push the
nail of your left thumb up between the clip and
the casing. Slide the clip upwards to remove.
6
5
5
6
8
9
10
7
7
8
9
10
7.5 h
Batteries may heat up during charging. This is not dangerous.
After a time, the charge capacity of the battery will decrease for technical reasons.
Handsets contained in the package have already been registered to the base. In the
event that a handset is not registered however, (indicated by "Please register
handset"), register the handset manually (
p. 73).
11
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / starting_GO.fm / 11/8/17
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Changing the display language
Changing the display language
You can change the display language, if the telephone has been set to an incomprehensible
language.
¤ Press the centre of the control key .
¤ Press the keys and slowly and successively . . . the
language settings display appears, the set language
(e. g. English) is highlighted ( = selected).
¤ To select a different language: Press the control key until
the desired language is highlighted on the display,
e. g. Francais press the key on the right directly underneath the display to activate the
language.
¤ To revert to idle status: Press and hold the End call key
Base station
Connecting to the mains power supply
¤ Insert the power cable of the power
adapter into the upper connection socket
at the rear of the base station.
¤ Push both cables into the appropriate cable
channels .
¤ Insert the power adapter into the power
socket .
Connecting to the analogue fixed line network
¤ Insert the phone cable into the lower
connection socket at the rear of the base
station.
¤ Push both cables into the appropriate cable
channels .
¤ Insert the phone cable into the fixed line
network connection .
Deutsch
English
Francais
1
2
3
Only use the supplied network cable.
The network cable must always be connected in order to function, as the phone will
not operate without a power supply.
1
2
3
12
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Base station
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / starting_GO.fm / 11/8/17
You can now use your phone to make calls via the fixed line network and you can be reached
on your fixed line network number.
An answer machine in the base station is
set with a pre-recorded announcement in answer
and record mode (
p. 43).
Connecting to the Internet
You will need to connect the phone to the Internet for Internet telephony (IP) and access to the
Internet and home network and Gigaset GO functions.
Connecting the base to a router
¤ Insert a jack from the Ethernet cable
supplied into the LAN connection
socket at the side of the base station
.
¤ Insert the second jack of the Ether-
net cable into an LAN connection
socket on the router .
As soon as the cable between the tele-
phone and the router is plugged in and the router is switched on, the key on the front of the base
st
ation lights up (paging key).
The phone is now connected to the Internet.
Only use the supp
lied phone cable. The pin connections of phone cables may vary.
For connecting to the Internet: a router connected to the Internet.
For Internet telephony: a broadband Internet connection (e.g. DSL) with a flat rate.
1
2
1
2
In order to be able to use all Gigaset GO functions, you may need to install apps on your
smartphone and apply settings in the phone's web configurator, e.g. registering your
phone with Gigaset elements.
Further information about the settings web configurator
Further information about Gigaset GO can be found at www.gigaset.com/go
13
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / starting_GO.fm / 11/8/17
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Setting up an IP account
Setting up an IP account
So that you are able to make calls via the Internet (VoIP), you must have at least one IP account
with an Internet telephony provider. You can register using the access data that you receive from
your provider (user name, authentication name, password etc.).
To register the phone with your provider, please use:
• The VoIP wizard on the handset
• Or the web configurator on a PC or tablet ( p. 97)
Registering using the VoIP wizard on the handset
¤ Press the Message key Yes . . . the wizard starts . . . scroll through the
displayed text OK
Data protection notice
When the device is connected to the router, it will automatically contact the Gigaset Support Server. It will
send the following device-specific information daily:
• Serial number/item number
• MAC address
• Private IP address for the Gigaset in the LAN/its port numbers
• Device name
• Software version
On the support server, this information is linked to the existing device-specific information:
• Gigaset.net phone number
• System-related/device-specific passwords
Further information about the data stored in relation to the Gigaset.net Service can be found at:
www.gigaset.net/privacy-policy
You can configure up to six IP accounts.
As soon as the handset battery has sufficient charge, the
Message key on the handset will flash.
If the wizard does not start properly or you have terminated it: Start the VoIP wizard
using the handset menu
¤ . . . Use to select Settings OK Telephony OK VoIP
Wizard
If "New firmware available" is shown on the display, there is a firmware update
available for your phone.
To update firmware: Yes . . . the new firmware is loaded (takes approx. 6 mins.)
The Message key will then flash again.
¤ To start configuration: Press the Message key .
14
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Setting up an IP account
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / starting_GO.fm / 11/8/17
The display shows the possible IP accounts (IP 1 to IP 6). Accounts
that are already configured are marked with .
¤ . . . Use to select the required account OK
The wizard establishes a connection to the Gigaset configuration server on the Internet. Various
profiles with general configuration data for different providers can be downloaded here.
Select provider
A list of countries is loaded.
¤ . . . Use to select the country in which you want to use the
phone OK . . . a list of providers in this country is displayed
. . . use to select provider OK . . . the general
configuration data for your provider is downloaded and stored
in the phone
Entering user data for your IP account
You are required to enter your personal access data for your IP account, e. g. Us
er ID, Password,
. . . (depending on the provider).
¤ Enter registration data confirm each entry using OK
Message on successful transfer: Y
our IP account is registered at your provider.
The fixed line network connection is assigned to the handsets as a send connection. Please
c
hange the send connection to make calls over the Internet.
Select IP Account
IP 1
IP 2
IP 3
IP 4
IP 5
Back OK
If no Internet connection can be established, a corresponding error message will be
generated. For more information, see "Questions and answers" Appendix
¤ Terminate the VoIP wizard: OK . . . The VoIP wizard will close Troubleshoot if
necessary Open the wizard again later via the menu to configure the IP account.
Select a Provider
Provider 1
Provider 2
Provider 3
Provider 4
Provider 5
Back OK
If your provider does not appear in the list:
Terminate the wizard: Press and hold the End call key . . . the handset returns to
idle status . . . set up the IP account using the web configurator
Pay attention when entering access data, as it is case sensitive.
¤ To switch between lowercase, uppercase and number entry mode: Press the
key
¤ To delete incorrectly entered characters: Press the display key
¤ To navigate within an entry field: Press right/left on the control key
15
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / starting_GO.fm / 11/8/17
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Setting up an IP account
Send and receive connections
Assign the available phone connections (fixed line network, Gigaset.net and up to six IP
connections) to the end devices as receive and, where necessary, send connections. End devices
are the registered handsets and the three base answer machines.
• Receive connection: Phone numbers you may be called on. Incoming calls are forwarded to
the end devices for which the relevant connection is assigned as receive connection.
• Send connection: A line that you use for an outgoing call. The corresponding number will be
transferred to the recipient. You can assign each end device a number or the associated
connection as a send connection.
Each connection (number) of your phone can be both a send as well as a receive connection and
c
an be assigned to several end devices. It may only be assigned to one answer machine as a
receive connection.
Default assignment
• All configured connections are assigned to the handsets and answer machine 1 as receive
connections on delivery.
• The fixed line network connection is assigned to the handsets as a send connection. If you
have no fixed line network connection, no send connection is assigned.
Change send connections
¤ . . . Use to select Settings OK Telephony OK Send
Connections OK
Select handset:
¤ . . . Use to select the handset on which you wish to change
the default assignment OK . . . the current connection for
outgoing calls assigned to the handset is displayed: Fixed Line
(if you have a fixed line network connection)
Change assignment:
¤ . . . use to select the desired connection or select Sel. at each
call Save
Sel. at each call: For each call, the line on which the call is
established can be selected.
You can now change the default assignment one after the other for
al
l registered handsets.
Change receive connection
¤ . . . Use to select Settings OK Telephony OK Rec.
Connections OK
INT 1
Connection for
outgoing calls:
< IP 1 >
Back Save
16
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Setting up an IP account
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / starting_GO.fm / 11/8/17
Select handset or answer machine :
¤ . . . Use to select the handset or answer machine on which
you wish to change the default assignment OK . . . the display
shows an entry for each available phone connection (IP 1– IP 6,
Gigaset.net, Fixed Line)
Change assignment:
¤ . . . Use to select the desired connection . . . use to
select Ye s or No (Ye s = calls to this connection will be diverted to
the handset/answer machine ) Save
INT 1
Receive calls for
IP 1:
< Yes >
Receive calls for
Gigaset.net:
Back Save
Only one receive connection can be assigned per answer machine.
One connection can only be assigned to one answer machine as a receive connection.
If you assign a receive connection to an answer machine and this connection is already
assigned to another answer machine, the "old" assignment is deleted.
17
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / operating.fm / 11/8/17
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Getting to know your telephone
Using the telephone
Getting to know your telephone
Switching the handset on/off
Locking/unlocking the keypad
The keypad lock prevents any accidental use of the telephone.
Lock/unlock the keypad: Press and hol
d
Keypad lock activated: the symbol appears in the display.
Control key
In the description below, the side of the control key (up, down, right, left) that you have to press
in the different operating situations is marked in black, e.g. for "press right on the control
key" or for "press the centre of the control key".
In idle status
In submenus, selection and entry fields
During a conversation
Switch on:
¤ Press and hold the End call key on the handset when switched off
Switch off:
¤ When the telephone is in idle status, press and hold the End call key
If a call is indicated on the handset, the keypad automatically unlocks and you can
accept the call. It then locks again when the call is finished.
It is not possible to call emergency numbers either when keypad lock is activated.
The control key enables you to navigate the menus and input fields, and also to
c
all up certain functions depending on the situation.
Open the directory Press briefly
Open the list of available online directories Press and hol
d
Open the main menu or
Open the list of handsets
Confirm a function
Open the directory
Open the list of available online directories Press and hold
Mute the microphone
Initiate an internal consultation call
Adjust the loudspeaker volume for receiver and handsfree
mode
18
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Getting to know your telephone
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / operating.fm / 11/8/17
Volume keys
Set volume for receiver/headset, ringtone, handsfree mode and indicating appointments:
Press the volume keys / on the right side of the handset
Display keys
The display keys perform a range of functions depending on the operating situation.
Display key icons p. 118.
Menu guidance
The functions of your telephone are displayed in a menu that consists of several levels p. 120
Select/confirm functions
Main menu
In idle status: Press the centre of the control key . . . use
the control key to select a submenu OK
The main menu functions are shown in the display as icons. The
icon f
or the selected function is highlighted in colour and the
name of the associated function appears in the display header.
The display keys have a function preset by defaul
t in idle status. Changing the assign-
ment:
p. 86
Confirm selection using OK or press the middle of the control key
One menu level back using Back
Change to idle status by Press and hold
Switch function on/off using Change on / off
Activate/deactivate option using Select activated / not activated
Current display key
functions
Display keys
Back Save
Settings
Back OK
Example
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137

Gigaset E630 A GO Owner's manual

Category
Mobile phones
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI