1. Overview
2.
Microphone
Speaker
Call button
Specification
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. : Tel.; +82-31-7393-540~550 Fax.; +82-31-745-2133
Web site : www.commax.com
Door Phone 2-Wire System(Nonpolar)
9V (Supplied from the door phone)
3.
Wiring & Installation
Door Release Cable
To Monitor Cable
Front case
Stationary hole
LED & Sensor
(+)RED, (-)BLACK
1. Connect Room station cables as appeared in the figure.(polarity with care)
2. Connect Door Release cable as appeared in the figure.
(applied only for DR-2GNR)
3. Check to see whether the system functions.
To Roomstation
#1 : RED
#2 : BLUE
Door Locking(DC9V-12V)
DL-3L(K)
OPTION OF CONTACT VERSION
Door release normal open contact
To Roomstation
#1 : RED
#2 : BLUE
the
groove around the case as
4. If there is no hole on the wall,
you
can allocate the wire on
appeared in the figure.
5. Place the system on the wall and
mount with screws supplied.
<In case of taking the cover off>
Pls use the drill-bit 3.5mm
83.5
120
87.5
2-6.5mm
PM132GN00010
Printed In Korea / 2016.06.105