Kichler Lighting 52049BKT User manual

Brand
Kichler Lighting
Model
52049BKT
Type
User manual

Kichler Lighting 52049BKT is a versatile light fixture compatible with various ceiling types and bulb types. It features a sturdy mounting strap and adjustable canopy for a secure and customized fit. The fixture accommodates multiple light bulbs, allowing you to tailor the brightness to your needs. Its elegant design, featuring a combination of metal and glass elements, complements a variety of décor styles. Installation requires basic electrical knowledge and should be performed by a qualified electrician to ensure safety and proper functioning.

Kichler Lighting 52049BKT is a versatile light fixture compatible with various ceiling types and bulb types. It features a sturdy mounting strap and adjustable canopy for a secure and customized fit. The fixture accommodates multiple light bulbs, allowing you to tailor the brightness to your needs. Its elegant design, featuring a combination of metal and glass elements, complements a variety of décor styles. Installation requires basic electrical knowledge and should be performed by a qualified electrician to ensure safety and proper functioning.

IS-52049-US
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
1) Find the appropriate threaded holes on mounng
strap[B]. Assemble mounng screws[C] into threaded
holes.
2) Aach mounng strap to outlet box[D] using the strap
mounng screws[I]. The mounng strap can be adjusted
to suit posion of xture.
3) Grounding instrucons: (See Illus. a or b).
a) On xtures where mounng strap is provided with a
hole and two raised dimples, wrap ground wire from
outlet box around green ground screw, and thread
into hole.
b) On xtures where a cupped washer is
provided,aach ground wire from outlet box under
cupped washer and green ground screw, then thread
into mounng strap.
If xture is provided with ground wire, connect xture
ground wire to outlet box ground wire with wire
connector aer following the above steps. Never connect
ground wire to black or white power supply wires.
4) Make wire connecon. Reference chart below for correct
connecons and wire accordingly.
Connect Black or Red
Supply Wire to:
Connect White Supply
Wire to:
Black White
*Parallel cord (round &
smooth)
*Parallel cord (square &
ridged)
Clear, Brown, Gold or Black
without Tracer
Clear, Brown, Gold or Black
with Tracer
Insulated wire (other
than green) with copper
conductor
Insulated wire (other than
green) with silver conductor
*Note: When parallel wire (SPT 1 &
SPT 2) are used. The neutral wire
is square shaped or ridged and the
other wire will be round in shape or
smooth
(see illus.) Neutral Wire
5) Raise xture to ceiling, carefully passing mounng screws
through holes in canopy[E]. NOTE: Be certain wires do
not get pinched between canopy and ceiling.
6) Use knobs[F] and lockwashers[G] to secure canopy.
Tighten to secure.
7) Aach lower center tube[K] to xture frame[J] by
screwing one end of short threaded tube[A] into end of
lower center tube and other end of short threaded tube
into coupling on boom of xture frame.
8) Aach lower plate[L] to lower center tube[K] by sliding
the plate over the protruding poron of the short
threaded tube[A] already inserted into the lower center
tube, ensuring threads pass through center hole on lower
plate. Screw hexnut[H] onto exposed threads to ghten
plate up to end of lower center tube.
9) Screw nial[M] onto threads protruding from the hexnut.
10) Aach chain strands[N] and bead strands[O] to xture
frame[J] by inserng hooks into holes in xture frame.
11) Aach lower ends of chain strands[N] and bead
strands[O] to lower plate[L] by inserng hooks on
unaached ends into holes in lower plate.
12) Install the recommended bulbs. (Not supplied).
GREEN GROUND
SCREW
CUPPED
WASHER
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
a
b
Fixture Diagram
Parts List
Cauons
CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main
fusebox before starng and during the installaon.
WARNING:
This xture is intended for installaon in accordance
with the Naonal Electrical Code (NEC) and all local code
specicaons. If you are not familiar with code requirements,
installaon by a cered electrician is recommended.
CLEANING:
• Always be certain that electric current is turned o before
cleaning.
• Only a so damp cloth should be used. Harsh cleaning
products may damage the nish.
[A] Short
Threaded
Tubes
[B] Mounting
Strap
[C] Mounting
Screws
[D] Outlet Box
[E] Canopy
[F] Knobs
[G] Lockwashers
[H] Hexnut
[I] Strap
Mounting
Screws
[J] Fixture Frame
[K] Lower Center
Tube
[L] Lower Plate
[M] Finial
[N] Chain Strands
[O] Bead Strands
Installaon Instrucons
D
B
I
C
G
E
F
J
A
A
L
H
M
O
N
K
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3

Kichler Lighting 52049BKT User manual

Brand
Kichler Lighting
Model
52049BKT
Type
User manual

Kichler Lighting 52049BKT is a versatile light fixture compatible with various ceiling types and bulb types. It features a sturdy mounting strap and adjustable canopy for a secure and customized fit. The fixture accommodates multiple light bulbs, allowing you to tailor the brightness to your needs. Its elegant design, featuring a combination of metal and glass elements, complements a variety of décor styles. Installation requires basic electrical knowledge and should be performed by a qualified electrician to ensure safety and proper functioning.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents