Everbilt SBF300 FAQ

Everbilt
Brand
Everbilt
Model
SBF300
Type
FAQ
• Septic tanks where contents need to be pumped into low pressure
system, mound system, sand filter, leaching field, or other on site
disposal system for proper filtering.
• Sink/laundry and septic discharge.
• Cast Iron - rugged, heavy-duty construction delivering up to
4200 gallons per hour (GPH).
Frequently Asked Questions
Effluent Pump Installation
Typical Installation
discharge
pipe
grounded
outlet
vent
stack
check valve
ball valve or
gate valve
sewage basin
cover
sewage
basin
1/8 in air
lock hole
effluent
pump
4 in waste
inlet
Effluent Pumps
For Professional Technical Support call 1-844-241-5521
Where Used
Typical Application
Types
Effluent – where dirty water with solids up to 3/4 in needs to be removed.
How do I know if I need an Effluent or
Sewage Pump?
1.
Any application that might have debris that measures greater
than 3/4 in needs a sewage pump.
What additional items may I need?
2.
Additional
items
needed
Size Internet#
2 in
2 in x 10 ft
2 in
2 in
2 in
18 in x 30 in
18 in
2 in
205616018
100161954
203825431
100343360
100342704
204725946
204733083
203933565
Check valve
Additional pipe
Male adapter
Elbow
Hub coupling
Sewage pump basin
Tank Cover for
Sewage Basin
Ball Valve
Rev. 02/17/17
For Professional Technical Support call 1-844-241-5521
check valve
gate valve
or ball valve
union
effluent
filter
DOSING CHAMBERSEPTIC TANK
To low pressure system,
mound system, sand filter,
leaching field, or other on
site disposal system.
ground line
to disconnect
(not shown)
ALARM
pump float
alarm float
turn on
turn off
pump stand
  • Page 1 1

Everbilt SBF300 FAQ

Everbilt
Brand
Everbilt
Model
SBF300
Type
FAQ
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents