2. OSP Furniture
  3. KEN-52-LCH

OSP Furniture KEN-52-LCH Operating instructions

  • Hello! I've reviewed the provided instructions for the KEN-52 bookcase. It outlines the steps for assembling your new furniture, including attaching the wall brackets, and assembling the drawers. I'm ready to answer any questions you have about its assembly process or features listed in the document.
  • What is the first step for the assembly?
    How many wall-attachment brackets are affixed to the top of the bookcase?
    What screws are used to affix the first wall-attachment bracket to bookcase?
2 DRAWER LATERAL WITH
KEN-52
37 W ×20 D×70 H
877-OSP-WORX
(677-9679)
Always lay components on A clean,
soft-cushioned surface during assembly.
STEP 3 (F)
(F)
1.Affix 1st wall-attachment bracket to the top of Bookcase,
at rear/center, using(2) SHORT screws.
2.Affix 2nd wall-attachment bracket to the wall,
using(2)wall anchors and(2) LONG screws.
Note: Locate the 2nd bracket 1/4” higher than the 1st
bracket(now located on the top of the bookcase). Align 2nd
bracket left/right with the 1st bracket.
3.Connect wall-attachment brackets with plastic cable tie.
(W1)Drawer Pull (G)Shelf Pin (D)Leg leveller (E7)Cap Screw (F)Wall-attachment kits
8PCS+14PCS 4PCS 12PCS+1 1PC
STEP 1 STEP 2
(D)
(D)
(D)
(D)
(G)
(W1)
(E7)
(G)
/