2. Worden
  3. F-T-42

Worden F-T-42 Assembly Instructions Manual

  • Hello! I've reviewed the installation manual for the Worden tables F-T-36, F-T-42, F-T-48, F-T-60, F-T-72, and F-T-90. This document provides step-by-step instructions for assembling the trestle frame, including the necessary tools, parts, and hardware. I'm ready to assist with any questions you have about the assembly process or the components mentioned in the manual.
  • What tools are required for assembly?
    What parts are required for one assembly?
    How many wood screws are needed for one assembly?
Folio Installation Manual
7/8/2010 Page 1 of 8
Assembly instructions for catalog numbers:
F-T-36
F-T-42
F-T-48
F-T-60
F-T-72
F-T-90
(Trestle assembly)
Tools required for assembly:
#3 Phillips screw driver bit with extension
Power screw driver
5/32” hex wrench
7/8/2010
Parts required to install (1) assembly:
(1) – Trestle frame
(1 – plain cover) -and- (1 – wire management cover)
(2) – Cover panels
7/8/2010
Hardware required to install (1) assembly (shown actual size):
(4) #12 x 5/8” pan head wood screws – black (part# 4300-1738)
(2) 1/4-20 x 60mm (2-3/8”) decorative head bolt – nickel (part# 31685N)
(2) 1/8” x 1-1/2” x 1-11/16” trestle spacer (part# 26671) (for floating panel end frame tables only)
7/8/2010 Page 4 of 8
1 (4) #12 x 5/8”
Attach the trestle frame to the underside of the work surface.
7/8/2010 Page 5 of 8
2a
(For Floating Panel tables only)
Attach the trestle frame and spacers to each end assembly.
(2) 1/4-20 x 60mm (2) Trestle spacer
7/8/2010 Page 6 of 8
2b (2) 1/4-20 x 60mm
(For all tables except Floating Panel tables)
Attach the trestle frame to each end assembly.
7/8/2010 Page 7 of 8
3
Install the trestle covers onto the trestle frame.
7/8/2010 Page 8 of 8
4
Assembly is complete. Adjust glides as needed.
/