Rice Lake MSI-8004HD Technical Manual

Brand
Rice Lake
Model
MSI-8004HD
Type
Technical Manual

This manual is also suitable for

MSI TranSend 7000 Series
Single and Multiple Channel Transmitters and Receivers
Technical Manual
PN 167375 Rev DNovember 21, 2018
An ISO 9001 registered company
© Rice Lake Weighing Systems. All rights reserved.
Rice Lake Weighing Systems® is a registered trademark of
Rice Lake Weighing Systems.
All other brand or product names within this publication are trademarks or
registered trademarks of their respective companies.
All information contained within this publication is, to the best of our knowledge, complete and
accurate at the time of publication. Rice Lake Weighing Systems reserves the right to make
changes to the technology, features, specifications and design of the equipment without notice.
The most current version of this publication, software, firmware and all other product
updates can be found on our website:
www.ricelake.com
Contents
© Rice Lake Weighing Systems ● All Rights Reserved i
Contents
Technical training seminars are available through Rice Lake Weighing Systems.
Course descriptions and dates can be viewed at www.ricelake.com/training
or obtained by calling 715-234-9171 and asking for the training department.
1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1.1 Transmitters: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1.2 Receivers: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.2 Standard Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.3 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.4 Model Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.5 Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.6 MSI-7000 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.7 MSI-7001 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.8 MSI-7000HD Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.9 MSI-7001HD Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.0 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.1 Unpacking and Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.2 Connect Load Cell Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.2.1 MSI-7001 TranSend. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.2.2 MSI-7000 TranSend and MSI-7000HD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.2.3 MSI-7001HD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.3 Connect Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.3.1 MSI-7001 TranSend. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.4 Network Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.5 Analog Output Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.5.1 MSI-7001 TranSend Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.5.2 MSI-7000 TranSend Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.5.3 PLC Wiring Diagrams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.6 Relays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.7 Mounting the Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.0 ScaleCore Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
3.1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
3.1.1 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
3.1.2 Install Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
3.1.3 Connect Product to Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3.2 Configuration/Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3.2.1 Connected Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3.2.2 Device Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3.2.3 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3.2.4 Load Cells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
3.2.5 Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
3.2.6 Inputs / Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
3.2.7 Monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
MSI TranSend 7000 Series
ii Visit our website www.RiceLake.com
Rice Lake continually offers web-based video training on a growing selection
of product-related topics at no cost. Visit www.ricelake.com/webinars
3.3 Advanced Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
3.3.1 File Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
3.3.2 Administration Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
3.3.3 Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
3.3.4 Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
3.3.5 Device Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
3.3.6 Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
3.3.7 Stream Print String. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
4.0 MSI mV Scale Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
5.0 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
5.1 Antenna Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
5.2 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Introduction
© Rice Lake Weighing Systems ● All Rights Reserved 1
1.0 Introduction
The MSI TranSend 7000 Series of wireless load cell interface transmitters and receivers are efficient communication devices
that replace the need for traditional wire runs. The MSI TranSend 7000 Series is designed to work with ScaleCore-based
products and are compatible with a broad range of transmitting and receiving devices. The transmitters in the series can
interface with any type of load cell. This manual provides the details for installation, configuration and calibration for the
MSI-7000 TranSend, MSI-7001 TranSend, MSI-7000HD and MSI-7001HD.
Manuals are available for viewing and/or downloading from the Rice Lake Weighing Systems website at
www.ricelake.com/manuals
Warranty information can be found on the website at www.ricelake.com/warranties
1.1 Overview
The MSI TranSend 7000 Series offers a wireless option in systems where it would be difficult to have a load cell cable. Replacing
the cable with an RF link, the output will be calibrated to match the device that the cable was connected to. A single MSI
TranSend 7000 Series transmitter or receiver can be used to communicate with a ScaleCore-based remote display or indicator.
A paired transmitter and receiver can be used to wirelessly send weigh data to virtually any indicator or remote display.
1.1.1 Transmitters:
An MSI TranSend 7000 Series transmitter can be used to send weigh data wirelessly to an MSI TranSend 7000 Series receiver
or a ScaleCore-based remote display. ScaleCore-based indicators can also be used as transmitters to send weigh data to
either an MSI TranSend 7000 Series receiver or a ScaleCore-based remote display.
Transmitter Model Options
Refer to Section 1.4 on page 3 for available MSI TranSend 7000 Series model configurations.
1.1.2 Receivers:
An MSI TranSend 7000 Series receiver can be used to receive weigh data wirelessly from an MSI TranSend 7000 Series
transmitter or a ScaleCore-based indicator. ScaleCore-based remote displays can also be used as receivers to receive weigh
data from either an MSI TranSend 7000 Series transmitter or a ScaleCore-based indicator. All MSI receivers are compatible with
all MSI transmitters, except for the receivers that provide an mV signal to a digital weight indicator.
Receiver Model Options
Refer to Section 1.4 on page 3 for available MSI TranSend 7000 Series model configurations.
Transmitter Transmitter and ReceiverReceiver
• MSI-7000 TranSend
• MSI-7001 TranSend
• MSI-7000HD
• MSI-7001HD
• MSI-3460
• MSI-4260
• MSI-7300
• MSI-8000HD
• MSI-8004HD
• MSI-7000 TranSend
• MSI-7001 TranSend
• MSI-8000
• MSI-8000HD
• MSI-8004HD
• LaserLight 2
MSI TranSend 7000 Series
2 Visit our website www.RiceLake.com
1.2 Standard Features
• Works with any basic digital weight indicator
• Excitation to load cell(s) provided by the transmitter, not the indicator
• Each transmitter/receiver set is individually paired for communication
• Auto-sleep mode - power down during non-use, power up with weight change
• Serial communication cable included
Additional HD Features
• IP68 milled aluminum enclosure
• 2nd radio modem available (MSI-7000HD only)
1.3 Safety
Safety Signal Definitions:
Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury. Includes
hazards that are exposed when guards are removed.
Indicates a potentially hazardous situation that, if not avoided, could result in serious injury or death. Includes
hazards that are exposed when guards are removed.
Indicates a potentially hazardous situation that, if not avoided, could result in minor or moderate injury.
Indicates information about procedures that, if not observed, could result in damage to equipment or corruption
to and loss of data.
General Safety
Do not operate or work on this equipment unless this manual has been read and all instructions are understood.
Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Rice Lake
Weighing Systems dealer for replacement manuals.
Failure to heed could result in serious injury or death.
Do not allow minors (children) or inexperienced persons to operate this unit.
Do not stand near a load being lifted as it is a potential falling hazard. Keep a safe distance.
Do not use for purposes other then weight taking or dynamic load monitoring.
Do not use any load bearing component that is worn beyond five percent of the original dimension.
Do not use any associated lifting product if any of the load bearing components are cracked, deformed or show signs of fatigue.
Do not exceed the rated load limit of the associated scale/dynamometer unit, rigging element or the lifting structure.
Do not allow multi-point contact with the hook, shackle or lifting eye of the associated scale/Dynamometer unit.
Do not allow high torque on the scale/dynamometer unless it is specifically designed for high torque.
Do not make alterations or modifications to the unit or associated load bearing devices; any alterations void the warranty.
Do not remove or obscure warning labels.
There are no user serviceable parts. Any repairs are to be performed by qualified service personnel only.
DANGER
WARNING
CAUTION
IMPORTANT
WARNING
Introduction
© Rice Lake Weighing Systems ● All Rights Reserved 3
1.4 Model Configurations
Part No. Description
MSI-7000 TranSend — Transmitters
159207 Four-channel transmitter, no relays, RF 802.15.4, 2.4 GHz, 5-6 VDC power input
161949 Four-channel transmitter, includes three coil relays, RF 802.15.4, 2.4 GHz, 5-6 VDC power input
176638 Four-channel transmitter, no relays, Bluetooth, 5-6 VDC power input
176641 Four-channel transmitter, includes three coil relays, Bluetooth, 5-6 VDC power input
176648 Four-channel transmitter, no relays, Wi-Fi, 5-6 VDC power input
176652 Four-channel transmitter, includes three coil relays, Wi-Fi, 5-6 VDC power input
159470 Four-channel transmitter, no relays, RF 802.15.4, 2.4 GHz, 7-36 VDC power input
161951 Four-channel transmitter, includes three coil relays, RF 802.15.4, 2.4 GHz, 7-36 VDC power input
176639 Four-channel transmitter, no relays, Bluetooth, 7-36 VDC power input
176642 Four-channel transmitter, includes three coil relays, Bluetooth, 7-36 VDC power input
176650 Four-channel transmitter, no relays, Wi-Fi, 7-36 VDC power input
176653 Four-channel transmitter, includes three coil relays, Wi-Fi, 7-36 VDC power input
159469 Four-channel transmitter, no relays. RF 802.15.4, 2.4 GHz, 85-265 VAC power input
161950 Four-channel transmitter, includes three coil relays, RF 802.15.4, 2.4 GHz, 85-265 VAC power input
176637 Four-channel transmitter, no relays, Bluetooth, 85-265 VAC power input
176640 Four-channel transmitter, includes three coil relays, Bluetooth, 85-265 VAC power input
176647 Four-channel transmitter, no relays, Wi-Fi, 85-265 VAC power input
176651 Four-channel transmitter, includes three coil relays, Wi-Fi, 85-265 VAC power input
MSI-7000 TranSend — Receivers
160016 Receiver to provide an analog output signal: 4-20 mA, 0-20 mA, 0-5 VDC, 0-10 VDC, +/- 5 VDC, +/- 10 VDC;
Includes three coil relays; RF 802.15.4, 2.4 GHz, 5-6 VDC power input
159476 Receiver to provide an analog output signal: 4-20 mA, 0-20 mA, 0-5 VDC, 0-10 VDC, +/- 5 VDC, +/- 10 VDC;
Includes three coil relays; RF 802.15.4, 2.4 GHz, 7-36 VDC power input
159475 Receiver to provide an analog output signal: 4-20 mA, 0-20 mA, 0-5 VDC, 0-10 VDC, +/- 5 VDC, +/- 10 VDC;
Includes three coil relays; RF 802.15.4, 2.4 GHz, 85-256 VAC power input
MSI-7001 TranSend — Transmitters
160330 Single-channel transmitter, no relays, RF 802.15.4, 2.4 GHz, 5-6 VDC power input
176644 Single-channel transmitter, no relays, Bluetooth, 5-6 VDC power input
176655 Single-channel transmitter, no relays, Wi-Fi, 5-6 VDC power input
160329 Single-channel transmitter, no relays, RF 802.15.4, 2.4 GHz, 7-36 VDC power input
176645 Single-channel transmitter, no relays, Bluetooth, 7-36 VDC power input
176656 Single-channel transmitter, no relays, Wi-Fi, 7-36 VDC power input
160328 Single-channel transmitter, no relays, RF 802.15.4, 2.4 GHz, 85-265 VAC power input
176643 Single-channel transmitter, no relays, Bluetooth, 85-265 VAC power input
176654 Single-channel transmitter, no relays, Wi-Fi, 85-265 VAC power input
MSI-7001 TranSend — Receivers
160337 Receiver to provide a mV signal to a digital weight indicator; no relays; RF 802.15.4, 2.4GHz, 5-6 VDC power input
160334 Receiver to provide an analog output signal: 4-20 mA, 0-20 mA, 0-5 VDC, 0-10 VDC, +/- 5 VDC, +/- 10 VDC; no relays;
RF 802.15.4, 2.4 GHz, 5-6 VDC power input
160336 Receiver to provide a mV signal to a digital weight indicator; no relays; RF 802.15.4, 2.4GHz, 7-36 VDC power input
160333 Receiver to provide an analog output signal: 4-20 mA, 0-20 mA, 0-5 VDC, 0-10 VDC, +/- 5 VDC, +/- 10 VDC; no relays;
RF 802.15.4, 2.4 GHz, 7-36 VDC power input
160335 Receiver to provide a mV signal to a digital weight indicator; no relays; RF 802.15.4, 2.4GHz, 85-265 VAC power input
160332 Receiver to provide an analog output signal: 4-20 mA, 0-20 mA, 0-5 VDC, 0-10 VDC, +/- 5 VDC, +/- 10 VDC; no relays;
RF 802.15.4, 2.4 GHz, 85-265 VAC power input
Table 1-1. Available Model Configurations
MSI TranSend 7000 Series
4 Visit our website www.RiceLake.com
NTEP options are available. Contact Rice Lake Weighing Systems for more information.
MSI-7000HD — Transmitters
177942 Four-channel transmitter, includes three coil relays, RF 802.15.4, 2.4 GHz, 85-265 VAC power input
177944 Four-channel transmitter, includes three coil relays, RF 802.15.4, 2.4 GHz, 7-36 VDC power input
177945 Four-channel transmitter, includes three coil relays, RF 802.15.4, 2.4 GHz, 9-36 VDC isolated power input
177950 Four-channel transmitter, includes three coil relays, Bluetooth, 85-265 VAC power input
177952 Four-channel transmitter, includes three coil relays, Bluetooth, 7-36 VDC power input
177953 Four-channel transmitter, includes three coil relays, Bluetooth, 9-36 VDC isolated power input
177995 Four-channel transmitter, includes three coil relays, Wi-Fi, 85-265 VAC power input
177997 Four-channel transmitter, includes three coil relays, Wi-Fi, 7-36 VDC power input
177998 Four-channel transmitter, includes three coil relays, Wi-Fi, 9-36 VDC isolated power input
MSI-7001HD — Transmitters
178021 Two-channel transmitter, no relays, RF 802.15.4, 2.4 GHz, 85-265 VAC power input
178010 Two-channel transmitter, no relays, RF 802.15.4, 2.4 GHz, 5-6 VDC power input
178011 Two-channel transmitter, no relays, RF 802.15.4, 2.4 GHz, 7-36 VDC power input
178012 Two-channel transmitter, no relays, RF 802.15.4, 2.4 GHz, 9-36 VDC isolated power input
178013 Two-channel transmitter, no relays, Bluetooth, 85-265 VAC power input
178014 Two-channel transmitter, no relays, Bluetooth, 5-6 VDC power input
178015 Two-channel transmitter, no relays, Bluetooth, 7-36 VDC power input
178016 Two-channel transmitter, no relays, Bluetooth, 9-36 VDC isolated power input
178017 Two-channel transmitter, no relays, Wi-Fi, 85-265 VAC power input
178018 Two-channel transmitter, no relays, Wi-Fi, 5-6 VDC power input
178019 Two-channel transmitter, no relays, Wi-Fi, 7-36 VDC power input
178020 Two-channel transmitter, no relays, Wi-Fi, 9-36 VDC isolated power input
Part No. Description
Table 1-1. Available Model Configurations (Continued)
Note
Introduction
© Rice Lake Weighing Systems ● All Rights Reserved 5
1.5 Options
Part No Description
162172 Charger, TranSend for 6V SLA battery; Not compatible with HD models
162173 Battery, TranSend for 6V SLA; Not compatible with HD models
162175 Enclosure, TranSend for 6V SLA battery; Not compatible with HD models
162178 Antenna kit, remote standard antenna
139309 Antenna kit, long range Omni with 3 m coax cable
139310 Antenna kit, corner reflector 9 dbi with 3 m coax cable
139311 Antenna kit, corner reflector 12 dbi with 3 m coax cable
139312 Antenna kit, Yagi 15 dbi with 3 m coax cable
144345 30 m coaxial cable, for use with non-vehicle mount antenna kits
139313 Antenna kit, vehicle mount. 5 dbi with 5 m coaxial cable
143880 Pre-wired cordset, 0.5 m, 4-pin male; for use with the MSI-7001 TranSend
162177 Pre-wired cordset, 2 m, 4-pin male; for use with the MSI-7001 TranSend
162184 Field wire-able connector, 4-pin male, 4-6 mm straight; for use with the MSI-7001 TranSend
162185 Field wire-able connector, 4-pin male, 6-8 mm straight; for use with the MSI-7001 TranSend
162186 Field wire-able connector, 4-pin male, 4-6 mm right angle; for use with the MSI-7001 TranSend
162187 Field wire-able connector, 4-pin male, 6-8 mm right angle; for use with single channel transmitters and all receivers
143531 Power cord, 6 V SLA battery charger, EU; Not compatible with HD models
143533 Power cord, 6 V SLA battery charger, Australia; Not compatible with HD models
143534 Power cord, 6 V SLA battery charger, UK; Not compatible with HD models
160109 AC adapter, TranSend 6V; Not compatible with HD models
160110 AC adapter, TranSend 6V US/UK/EU/AUS/China; Not compatible with HD models
150964 RS-232 serial cable, nine-pin female; Not compatible with HD models
150965 RS-232 serial cable, nine-pin male; Not compatible with HD models
145085 RS-232 serial cable, nine-pin unterminated
148624 RS-232/485 cable assembly; M12 to nine-pin female; Only compatible with HD models
164865 Cable, 4 m, one-channel, mV/V output, LC input
165648 Cable, 5 m, one-channel, mV/V output, LC input
165651 Cable, 10 m, one-channel, mV/V output, LC input
145084 Cable, 2 m, one-channel, analog output
144400 Cable, 5 m, one-channel, analog output
168903 Cable, 10 m, one-channel, analog output
Consult Straight connector, analog output, 4-6 mM OD
Consult Straight connector, analog output, 6-8 mM OD
Consult Right angle connector, analog output, 4-6 mM OD
Consult Right angle connector, analog output, 6-8 mM OD
184002 7000HD half-plate mounted, FHSS, DC (battery) powered; Only compatible with 7000HD models
Consult GoDex Dt4X direct thermal printer
Table 1-2. Available Options
MSI TranSend 7000 Series
6 Visit our website www.RiceLake.com
1.6 MSI-7000 Front Panel
Figure 1-1. MSI-7000 Front Panel
Item No. Description
1 Power Input – Located on the side of the unit
2 Setpoint 1-3 Connections – Located on the side of the unit
3 Type of Power Source – Type will be checked
4 Setpoint LEDs
Green – Setpoint is enabled and not tripped
Red – Setpoint is enabled and tripped
Orange – Setpoint configuration error
5 Power Button
6 Power LED – Indicates unit is on when lit
Steady Green – On with good battery (or AC)
Steady Orange – On with low battery
Blinking Red – On with very low battery
7 Serial Port – Located on the top of unit; Pre-set at 9600 baud and 8-N-1
8 Wireless Options – Type is checked
9 Channel LEDs – Indicates which channel is being controlled by the unit
Off – Sensor is disabled
Blinking Orange – RF is disconnected
Steady Orange – Sensor fault (overload/underload/uncal/error/etc.)
Blinking Blue – Sensor is in CoZ and working properly
Steady Blue – Sensor is loaded and working properly
Steady Purple – Sensor Selected (for two seconds)
10 Zero Button – Press to zero the currently selected channel
11 Arrow Buttons – Use to scroll through channels
12 Load Cell Inputs – Located on the side of the unit
13 Output / Input – Type is checked
Table 1-3. MSI-7000 Front Panel Controls
1
2
3
4
FHSS
Wi-Fi 802.11
802.15.4
Serial
Port
Output
1
2
Input
Power
In
Set Point
2-3
Set Point
1-2
2
1
3
4
5
9
10
11
8
7
12
6
13
Introduction
© Rice Lake Weighing Systems ● All Rights Reserved 7
1.7 MSI-7001 Front Panel
Figure 1-2. MSI-7001 Front Panel
Item No. Description
1 Output / Input – Type is checked
2 RF Frequency – Type is checked
3 Transmitter Power LED – Indicates state of unit power
Steady short green blinks – Good battery (or AC power)
Two red blinks then a pause – Low battery
Four red blinks then a pause – Very low battery
Steady red – Load cell fault (overload/underload/uncal/error/etc.)
Five green blinks per second – Calibration mode
Receiver Power LED – Indicates state of unit power
Steady short green blinks – RF connected, good battery (or AC power)
Two short red blinks then a pause – RF connected, low battery
Four short red blinks then a pause – RF connected, very low battery
Steady long red blinks – RF disconnected and good battery (or AC power)
Long red blink, short red blink then a pause – RF disconnected and low battery
Long red blink, three short red blinks – RF disconnected and very low battery
NOTE: Older units have a single color red LED and newer units have a dual color red and green LED. Blinking patterns are
consistent for all units.
4 Power Button
Press & release – Turns unit on
Press & hold 1-4 seconds – Will auto zero
Press & hold 5 seconds – Turns unit off
5 Power Input – Located on the side of the unit; Type is checked
6 Serial Port – Located on the side of unit; Pre-set at 9600 baud and 8-N-1
Table 1-4. MSI-7001 Front Panel Controls
Sensor In
Power In
Serial
Port
85~265 VAC
47~63 Hz
7~36 VDC
EXT BATTERY
5~6 VDC
Load Cell In
mV/V Out
802.15.4
WiFi 802.11
FHSS
2
1
34
5
6
Measurement Systems
International
TM
A RICE LAKE WEIGHING SYSTEMS COMPANY
MSI-7001
Made in the U.S.A
Blink Rate
1/s = Power OK
2/s = Low
4/s = Very Low
MSI TranSend 7000 Series
8 Visit our website www.RiceLake.com
1.8 MSI-7000HD Front Panel
Figure 1-3. MSI-7000HD Front Panel
Item No. Description
1 Setpoint 1-3 Connections – Located on the side of the unit
2 Power Input – Located on the side of the unit
3 Setpoint LEDs
Green – Setpoint is enabled and not tripped
Red – Setpoint is enabled and tripped
Orange – Setpoint configuration error
4 Power Button
5 Power LED – Indicates unit is on when lit
Steady Green – On with good battery (or AC)
Steady Orange – On with low battery
Blinking Red – On with very low battery
6 Zero Button – Press to zero the currently selected channel
7 Arrow Buttons – Use to scroll through channels
8 Calibration Screw – Used when unit is in NTEP mode
9 Channel LEDs – Indicates which channel is being controlled by the unit
Off – Sensor is disabled
Blinking Orange – RF is disconnected
Steady Orange – Sensor fault (overload/underload/uncal/error/etc.)
Blinking Blue – Sensor is in CoZ and working properly
Steady Blue – Sensor is loaded and working properly
Steady Purple – Sensor Selected (for two seconds for zeroing)
10 Communication Ports – Comm Port 1 is pre-set at 9600 baud and 8-N-1; Comm Port 2 is pre-set at 38400 baud and 8-N-1
11 Load Cell Inputs - Located on the side of the unit
Table 1-5. MSI-7000HD Front Panel Controls
CAL
POWER IN
CHANNEL 1
RELAY 2
RELAY 3
CHANNEL 2
CHANNEL 3
CHANNEL 4
2
13
4
5
6
7
8
9
10
11
Introduction
© Rice Lake Weighing Systems ● All Rights Reserved 9
1.9 MSI-7001HD Front Panel
Figure 1-4. MSI-7001HD Front Panel
Item No. Description
1 Power In Connection – Located on the side of the unit
2 Power Button
Press & release – Turns unit on
Press & hold 1-4 seconds – Will auto zero
Press & hold 5 seconds – Turns unit off
3 Transmitter Power LED – Indicates state of unit power
Steady short green blinks – Good battery (or AC power)
Two red blinks then a pause – Low battery
Four red blinks then a pause – Very low battery
Steady red – Load cell fault (overload/underload/uncal/error/etc.)
Five green blinks per second – Calibration mode
Receiver Power LED – Indicates state of unit power
Steady short green blinks – RF connected, good battery (or AC power)
Two short red blinks then a pause – RF connected, low battery
Four short red blinks then a pause – RF connected, very low battery
Steady long red blinks – RF disconnected and good battery (or AC power)
Long red blink, short red blink then a pause – RF disconnected and low battery
Long red blink, three short red blinks – RF disconnected and very low battery
4 Communication Ports – Comm Port 1 is pre-set at 9600 baud and 8-N-1; Comm Port 2 is pre-set at 38400 baud and 8-N-1
5 Load Cell Connectors - Located on the side of the unit.
Table 1-6. MSI-7001HD Front Panel Controls
Blink Rate
1/s = Power OK
2/s = Low
4/s = Very Low
Red = LC Fault
5/s Green = Cal
POWER IN
POWER
12
COMM
PORTS
9600 Baud 8-N-1
CHANNEL
1
CHANNEL
2
MSI-7001HD
1
2
3
4
5
MSI TranSend 7000 Series
10 Visit our website www.RiceLake.com
2.0 Installation
This section describes procedures for connecting load cell and serial communications cables, along with instructions for
mounting the enclosures.
2.1 Unpacking and Assembly
Immediately after unpacking, visually inspect the contents to ensure all components are included and undamaged. If any parts
were damaged in shipment, notify Rice Lake Weighing Systems and the shipper immediately.
2.2 Connect Load Cell Cables
2.2.1 MSI-7001 TranSend
If using the optional pre-wired cable, refer to the load cell wiring guide table for connecting the cable to the load cell.
OR
If using the field wire-able connector refer to Figure 2-1 and Table 2-1 to connect an MSI-7001 TranSend transmitter to a load
cell or j-box.
See Section 1.5 on page 5 for available cable and connector options.
Figure 2-1. Field Wire-able Male Connector
The metal braid shield is connected to the metal shell of the cordset’s connector head. If the MSI-7001 TranSend is
grounded through its mounting screws, this is usually sufficient. In most applications it is not necessary to connect
the shield to the j-box shield terminal. Sometimes noise pickup is improved by connecting the shield inside the j-box.
However, it may make noise pickup worse. Test performance before cutting off the shield at the cable end.
Connector Pin # Wire Color Function
1 Brown +Excitation
2 White -Excitation
3 Blue +Signal
4 Black -Signal
Table 2-1. MSI-7001 TranSend – Load Cell Wiring Guide
Note
1
2
3
4
Note
Installation
© Rice Lake Weighing Systems ● All Rights Reserved 11
2.2.2 MSI-7000 TranSend and MSI-7000HD
For MSI-7000 TranSend and MSI-7000HD transmitters, feed standard load cell cables through the cord grips and wire to the
terminal strip.
Figure 2-2. Load Cell to Terminal Block Connection
In most applications it is not necessary to connect the shield to the j-box shield terminal. Sometimes noise pickup is
improved by connecting the shield inside the j-box. However, it may make noise pickup worse. Test performance
before cutting off the shield at the cable end.
2.2.3 MSI-7001HD
For MSI-7001HD transmitters, feed standard load cell cables through the cord grips and wire to the terminal strip.
Load Cells 1 and 2 share a common excitation connection in two load cell configurations.
Figure 2-3. MSI-7001HD Load Cell to Terminal Block Connection
Load Cell 1 Load Cell 2 Load Cell 3 Load Cell 4
– Excitation
+ Excitation
– Signal
+ Signal
– Excitation
+ Excitation
– Signal
+ Signal
– Excitation
+ Excitation
– Signal
+ Signal
– Excitation
+ Excitation
– Signal
+ Signal
Note
Note
Load Cell 2
Load Cell 1
– Signal 2
+ Signal 2
– Excitation
+ Excitation
– Signal 1
+ Signal 1
Shield
Shared
MSI TranSend 7000 Series
12 Visit our website www.RiceLake.com
2.3 Connect Power
2.3.1 MSI-7001 TranSend
1. Connect the power source to the MSI-7001 TranSend.
Figure 2-4. Power Input Wiring
2.4 Network Connections
When connecting to a remote device for a network setting, transmitting and receiving units must be set to ensure network and
channel settings match.
The Device ID must be unique to each unit. See Section 3.2.3 on page 21.
2.5 Analog Output Connection
2.5.1 MSI-7001 TranSend Connector
2.5.2 MSI-7000 TranSend Wiring
7001 Power Input Wiring, 7-36VDC Version
+VIN
GND Power Input Cable 6VDC Battery Connector
or
120VAC Power
Adapter Connector
7001 Power Input Wiring, 5-6VDC Version
Power Input Cable
Note
7.0 mm [0.28"]
Blue: Isolated Ground
Black: Current Out
Brown: Loop Voltage In (Opt)
White: Voltage Out
Installation
© Rice Lake Weighing Systems ● All Rights Reserved 13
2.5.3 PLC Wiring Diagrams
Pin # Wire Color Function Comment
1 Brown Loop Voltage In Optional for increasing compliance. Input range: +16V to 36Vmax
2 Black Current Out Will drive 20mA into 625Ω without external boost voltage. See Table 2-3.
3 White Voltage Output Specified for load resistance ≥1kΩ. Recommended
load resistance: 100kΩ to minimize voltage drop due
to wire resistance in connecting cable.
4 Blue Isolated Ground Connection required for current and voltage output
Table 2-2. Analog Output Wiring
External Loop
Voltage Input
20mA Output Max Rwiring+
Rshunt
24mA Output Max Rwiring+
Rshunt
None 625Ω 520Ω
18V 750Ω 625Ω
24V 1.05kΩ 875Ω
30V 1.35kΩ 1.125kΩ
36V 1.65kΩ 1.375kΩ
Table 2-3. Current Compliance Table
16~36 Vdc
NC
NC
NC
Standard Current Output Wiring
P4-Isolated Gnd
P2-Current Out
P1-Loop Volt In
P3-Voltage Out
PLC
A/D
+
–
PLC
A/D
+
–
NC
NC
Voltage Output Wiring
PLC
A/D
+
–
Shunt
Shunt
See
Table
250Ω
Typ
Current Output Wiring with a Voltage Loop
P4-Isolated Gnd
P2-Current Out
P1-Loop Volt In
P3-Voltage Out
From
7001
or
7000 P4-Isolated Gnd
P2-Current Out
P1-Loop Volt In
P3-Voltage Out
From
7001
or
7000
From
7001
or
7000
Analog Output connector pin-out is pin
1=LOOPV IN, pin 2=VDAC OUT, pin 3=ISO
GND, and pin 4=IDAC OUT
MSI TranSend 7000 Series
14 Visit our website www.RiceLake.com
2.6 Relays
The MSI-7000 TranSend can be equipped with three Form C Coil relays for process control or safety related systems. The MSI-
7000HD comes standard with three relays.
Relays are installed and wired out to 3 pins on a M12 connector.
Figure 2-5. Relay Wiring Diagram
With normally open wiring, the contact is de-energized when the setpoint is inactive. When the setpoint is tripped, the contact
will close and the relay will energize.
With normally closed wiring, the contact is closed and energized when the setpoint is inactive. When the setpoint is tripped, the
contact will open and the relay will de-energize.
See Section 3.2.6 on page 30 for programming setpoints.
Relay 1 - Common
ACN or B-
ACL or B+
Relay 1 - Normally Open
Relay 1 - Normally Closed
Relay 2 - Common
Relay 2 - Normally Open
Relay 2 - Normally Closed
Relay 3 - Common
Relay 3 - Normally Open
Relay 3 - Normally Closed
Fuse
5A Type
Relay Configuration
(1 of 3)
Installation
© Rice Lake Weighing Systems ● All Rights Reserved 15
2.7 Mounting the Enclosure
The MSI TranSend 7000 Series transmitters and receivers can be mounted either vertically or horizontally to a flat surface.
If mounted inside an enclosure or I-beam, use the correct antenna for the environment and distance. Please call Rice Lake
Weighing Systems, if assistance is needed to select an antenna, or reference the antenna selection guide in the appendix.
Antennas must be placed within line-of-sight for reliable communications.
A standard antenna and coax connector are resistant to water, but not water-proof.
Seal the TNC base with an adhesive heat shrink boot if antenna is exposed to water.
Figure 2-6. Mounting Dimensions – MSI-7001 TranSend
Note
IMPORTANT
8.54"
217.0 mm
8.09"
205.5 mm
Center Distance
3.97"
100.8 mm
3.47"
88.24 mm
4.70"
119.28 mm
0.246"
6.25 mm
1.57"
39.88 mm
Bottom Ø 0.167" (4.24 mm)
Top Ø 0.394" (10.01 mm)
MSI TranSend 7000 Series
16 Visit our website www.RiceLake.com
Figure 2-7. Mounting Dimensions – MSI-7000 TranSend
5.89"
149.50 mm
5.34"
135.64 mm
Center Distance
1.79"
45.49 mm 2.579"
65.51 mm
1.58"
39.88 mm
0.276"
7.01 mm
Bottom Ø 0.177" (4.50 mm)
Top Ø 0.382" (9.70 mm)
1.24"
31.50 mm
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50

Rice Lake MSI-8004HD Technical Manual

Brand
Rice Lake
Model
MSI-8004HD
Type
Technical Manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents