Rice Lake LaserLight 2 Technical Manual

Brand: Rice Lake

Model: LaserLight 2

Type: Technical Manual

This manual is also suitable for

MSI TranSend 7000 Series

Single and Multiple Channel Transmitters and Receivers

Technical Manual

PN 167375 Rev DNovember 21, 2018

An ISO 9001 registered company

Rice Lake Weighing Systems® is a registered trademark of

Rice Lake Weighing Systems.

All other brand or product names within this publication are trademarks or

registered trademarks of their respective companies.

All information contained within this publication is, to the best of our knowledge, complete and

accurate at the time of publication. Rice Lake Weighing Systems reserves the right to make

changes to the technology, features, specifications and design of the equipment without notice.

The most current version of this publication, software, firmware and all other product

updates can be found on our website:

www.ricelake.com

Contents

Technical training seminars are available through Rice Lake Weighing Systems.

Course descriptions and dates can be viewed at www.ricelake.com/training

or obtained by calling 715-234-9171 and asking for the training department.

1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.1.1 Transmitters: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.1.2 Receivers: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.2 Standard Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1.3 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1.4 Model Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.5 Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.6 MSI-7000 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.7 MSI-7001 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.8 MSI-7000HD Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1.9 MSI-7001HD Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2.0 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.1 Unpacking and Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.2 Connect Load Cell Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.2.1 MSI-7001 TranSend. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.2.2 MSI-7000 TranSend and MSI-7000HD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.2.3 MSI-7001HD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.3 Connect Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2.3.1 MSI-7001 TranSend. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2.4 Network Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2.5 Analog Output Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2.5.1 MSI-7001 TranSend Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2.5.2 MSI-7000 TranSend Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2.5.3 PLC Wiring Diagrams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2.6 Relays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.7 Mounting the Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

3.0 ScaleCore Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

3.1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

3.1.1 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

3.1.2 Install Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

3.1.3 Connect Product to Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

3.2 Configuration/Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

3.2.1 Connected Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

3.2.2 Device Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

3.2.3 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

3.2.4 Load Cells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

3.2.5 Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

3.2.6 Inputs / Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

3.2.7 Monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

MSI TranSend 7000 Series

ii Visit our website www.RiceLake.com

Rice Lake continually offers web-based video training on a growing selection

of product-related topics at no cost. Visit www.ricelake.com/webinars

3.3 Advanced Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

3.3.1 File Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

3.3.2 Administration Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

3.3.3 Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

3.3.4 Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

3.3.5 Device Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

3.3.6 Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

3.3.7 Stream Print String. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

4.0 MSI mV Scale Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

5.0 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

5.1 Antenna Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

5.2 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Introduction

1.0 Introduction

The MSI TranSend 7000 Series of wireless load cell interface transmitters and receivers are efficient communication devices

that replace the need for traditional wire runs. The MSI TranSend 7000 Series is designed to work with ScaleCore-based

products and are compatible with a broad range of transmitting and receiving devices. The transmitters in the series can

interface with any type of load cell. This manual provides the details for installation, configuration and calibration for the

MSI-7000 TranSend, MSI-7001 TranSend, MSI-7000HD and MSI-7001HD.

Manuals are available for viewing and/or downloading from the Rice Lake Weighing Systems website at

www.ricelake.com/manuals

Warranty information can be found on the website at www.ricelake.com/warranties

1.1 Overview

The MSI TranSend 7000 Series offers a wireless option in systems where it would be difficult to have a load cell cable. Replacing

the cable with an RF link, the output will be calibrated to match the device that the cable was connected to. A single MSI

TranSend 7000 Series transmitter or receiver can be used to communicate with a ScaleCore-based remote display or indicator.

A paired transmitter and receiver can be used to wirelessly send weigh data to virtually any indicator or remote display.

1.1.1 Transmitters:

An MSI TranSend 7000 Series transmitter can be used to send weigh data wirelessly to an MSI TranSend 7000 Series receiver

or a ScaleCore-based remote display. ScaleCore-based indicators can also be used as transmitters to send weigh data to

either an MSI TranSend 7000 Series receiver or a ScaleCore-based remote display.

Transmitter Model Options

Refer to Section 1.4 on page 3 for available MSI TranSend 7000 Series model configurations.

1.1.2 Receivers:

An MSI TranSend 7000 Series receiver can be used to receive weigh data wirelessly from an MSI TranSend 7000 Series

transmitter or a ScaleCore-based indicator. ScaleCore-based remote displays can also be used as receivers to receive weigh

data from either an MSI TranSend 7000 Series transmitter or a ScaleCore-based indicator. All MSI receivers are compatible with

all MSI transmitters, except for the receivers that provide an mV signal to a digital weight indicator.

Receiver Model Options

Refer to Section 1.4 on page 3 for available MSI TranSend 7000 Series model configurations.

Transmitter Transmitter and ReceiverReceiver

• MSI-7000 TranSend

• MSI-7001 TranSend

• MSI-7000HD

• MSI-7001HD

• MSI-3460

• MSI-4260

• MSI-7300

• MSI-8000HD

• MSI-8004HD

• MSI-7000 TranSend

• MSI-7001 TranSend

• MSI-8000

• MSI-8000HD

• MSI-8004HD

• LaserLight 2

MSI TranSend 7000 Series

2 Visit our website www.RiceLake.com

1.2 Standard Features

• Works with any basic digital weight indicator

• Excitation to load cell(s) provided by the transmitter, not the indicator

• Each transmitter/receiver set is individually paired for communication

• Auto-sleep mode - power down during non-use, power up with weight change

• Serial communication cable included

Additional HD Features

• IP68 milled aluminum enclosure

• 2nd radio modem available (MSI-7000HD only)

1.3 Safety

Safety Signal Definitions:

Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury. Includes

hazards that are exposed when guards are removed.

Indicates a potentially hazardous situation that, if not avoided, could result in serious injury or death. Includes

hazards that are exposed when guards are removed.

Indicates a potentially hazardous situation that, if not avoided, could result in minor or moderate injury.

Indicates information about procedures that, if not observed, could result in damage to equipment or corruption

to and loss of data.

General Safety

Do not operate or work on this equipment unless this manual has been read and all instructions are understood.

Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Rice Lake

Weighing Systems dealer for replacement manuals.

Failure to heed could result in serious injury or death.

Do not allow minors (children) or inexperienced persons to operate this unit.

Do not stand near a load being lifted as it is a potential falling hazard. Keep a safe distance.

Do not use for purposes other then weight taking or dynamic load monitoring.

Do not use any load bearing component that is worn beyond five percent of the original dimension.

Do not use any associated lifting product if any of the load bearing components are cracked, deformed or show signs of fatigue.

Do not exceed the rated load limit of the associated scale/dynamometer unit, rigging element or the lifting structure.

Do not allow multi-point contact with the hook, shackle or lifting eye of the associated scale/Dynamometer unit.

Do not allow high torque on the scale/dynamometer unless it is specifically designed for high torque.

Do not make alterations or modifications to the unit or associated load bearing devices; any alterations void the warranty.

Do not remove or obscure warning labels.

There are no user serviceable parts. Any repairs are to be performed by qualified service personnel only.

DANGER

WARNING

CAUTION

IMPORTANT

WARNING

Introduction

1.4 Model Configurations

Part No. Description

MSI-7000 TranSend — Transmitters

159207 Four-channel transmitter, no relays, RF 802.15.4, 2.4 GHz, 5-6 VDC power input

161949 Four-channel transmitter, includes three coil relays, RF 802.15.4, 2.4 GHz, 5-6 VDC power input

176638 Four-channel transmitter, no relays, Bluetooth, 5-6 VDC power input

176641 Four-channel transmitter, includes three coil relays, Bluetooth, 5-6 VDC power input

176648 Four-channel transmitter, no relays, Wi-Fi, 5-6 VDC power input

176652 Four-channel transmitter, includes three coil relays, Wi-Fi, 5-6 VDC power input

159470 Four-channel transmitter, no relays, RF 802.15.4, 2.4 GHz, 7-36 VDC power input

161951 Four-channel transmitter, includes three coil relays, RF 802.15.4, 2.4 GHz, 7-36 VDC power input

176639 Four-channel transmitter, no relays, Bluetooth, 7-36 VDC power input

176642 Four-channel transmitter, includes three coil relays, Bluetooth, 7-36 VDC power input

176650 Four-channel transmitter, no relays, Wi-Fi, 7-36 VDC power input

176653 Four-channel transmitter, includes three coil relays, Wi-Fi, 7-36 VDC power input

159469 Four-channel transmitter, no relays. RF 802.15.4, 2.4 GHz, 85-265 VAC power input

161950 Four-channel transmitter, includes three coil relays, RF 802.15.4, 2.4 GHz, 85-265 VAC power input

176637 Four-channel transmitter, no relays, Bluetooth, 85-265 VAC power input

176640 Four-channel transmitter, includes three coil relays, Bluetooth, 85-265 VAC power input

176647 Four-channel transmitter, no relays, Wi-Fi, 85-265 VAC power input

176651 Four-channel transmitter, includes three coil relays, Wi-Fi, 85-265 VAC power input

MSI-7000 TranSend — Receivers

160016 Receiver to provide an analog output signal: 4-20 mA, 0-20 mA, 0-5 VDC, 0-10 VDC, +/- 5 VDC, +/- 10 VDC;

Includes three coil relays; RF 802.15.4, 2.4 GHz, 5-6 VDC power input

159476 Receiver to provide an analog output signal: 4-20 mA, 0-20 mA, 0-5 VDC, 0-10 VDC, +/- 5 VDC, +/- 10 VDC;

Includes three coil relays; RF 802.15.4, 2.4 GHz, 7-36 VDC power input

159475 Receiver to provide an analog output signal: 4-20 mA, 0-20 mA, 0-5 VDC, 0-10 VDC, +/- 5 VDC, +/- 10 VDC;

Includes three coil relays; RF 802.15.4, 2.4 GHz, 85-256 VAC power input

MSI-7001 TranSend — Transmitters

160330 Single-channel transmitter, no relays, RF 802.15.4, 2.4 GHz, 5-6 VDC power input

176644 Single-channel transmitter, no relays, Bluetooth, 5-6 VDC power input

176655 Single-channel transmitter, no relays, Wi-Fi, 5-6 VDC power input

160329 Single-channel transmitter, no relays, RF 802.15.4, 2.4 GHz, 7-36 VDC power input

176645 Single-channel transmitter, no relays, Bluetooth, 7-36 VDC power input

176656 Single-channel transmitter, no relays, Wi-Fi, 7-36 VDC power input

160328 Single-channel transmitter, no relays, RF 802.15.4, 2.4 GHz, 85-265 VAC power input

176643 Single-channel transmitter, no relays, Bluetooth, 85-265 VAC power input

176654 Single-channel transmitter, no relays, Wi-Fi, 85-265 VAC power input

MSI-7001 TranSend — Receivers

160337 Receiver to provide a mV signal to a digital weight indicator; no relays; RF 802.15.4, 2.4GHz, 5-6 VDC power input

160334 Receiver to provide an analog output signal: 4-20 mA, 0-20 mA, 0-5 VDC, 0-10 VDC, +/- 5 VDC, +/- 10 VDC; no relays;

RF 802.15.4, 2.4 GHz, 5-6 VDC power input

160336 Receiver to provide a mV signal to a digital weight indicator; no relays; RF 802.15.4, 2.4GHz, 7-36 VDC power input

160333 Receiver to provide an analog output signal: 4-20 mA, 0-20 mA, 0-5 VDC, 0-10 VDC, +/- 5 VDC, +/- 10 VDC; no relays;

RF 802.15.4, 2.4 GHz, 7-36 VDC power input

160335 Receiver to provide a mV signal to a digital weight indicator; no relays; RF 802.15.4, 2.4GHz, 85-265 VAC power input

160332 Receiver to provide an analog output signal: 4-20 mA, 0-20 mA, 0-5 VDC, 0-10 VDC, +/- 5 VDC, +/- 10 VDC; no relays;

RF 802.15.4, 2.4 GHz, 85-265 VAC power input

Table 1-1. Available Model Configurations

MSI TranSend 7000 Series

4 Visit our website www.RiceLake.com

NTEP options are available. Contact Rice Lake Weighing Systems for more information.

MSI-7000HD — Transmitters

177942 Four-channel transmitter, includes three coil relays, RF 802.15.4, 2.4 GHz, 85-265 VAC power input

177944 Four-channel transmitter, includes three coil relays, RF 802.15.4, 2.4 GHz, 7-36 VDC power input

177945 Four-channel transmitter, includes three coil relays, RF 802.15.4, 2.4 GHz, 9-36 VDC isolated power input

177950 Four-channel transmitter, includes three coil relays, Bluetooth, 85-265 VAC power input

177952 Four-channel transmitter, includes three coil relays, Bluetooth, 7-36 VDC power input

177953 Four-channel transmitter, includes three coil relays, Bluetooth, 9-36 VDC isolated power input

177995 Four-channel transmitter, includes three coil relays, Wi-Fi, 85-265 VAC power input

177997 Four-channel transmitter, includes three coil relays, Wi-Fi, 7-36 VDC power input

177998 Four-channel transmitter, includes three coil relays, Wi-Fi, 9-36 VDC isolated power input

MSI-7001HD — Transmitters

178021 Two-channel transmitter, no relays, RF 802.15.4, 2.4 GHz, 85-265 VAC power input

178010 Two-channel transmitter, no relays, RF 802.15.4, 2.4 GHz, 5-6 VDC power input

178011 Two-channel transmitter, no relays, RF 802.15.4, 2.4 GHz, 7-36 VDC power input

178012 Two-channel transmitter, no relays, RF 802.15.4, 2.4 GHz, 9-36 VDC isolated power input

178013 Two-channel transmitter, no relays, Bluetooth, 85-265 VAC power input

178014 Two-channel transmitter, no relays, Bluetooth, 5-6 VDC power input

178015 Two-channel transmitter, no relays, Bluetooth, 7-36 VDC power input

178016 Two-channel transmitter, no relays, Bluetooth, 9-36 VDC isolated power input

178017 Two-channel transmitter, no relays, Wi-Fi, 85-265 VAC power input

178018 Two-channel transmitter, no relays, Wi-Fi, 5-6 VDC power input

178019 Two-channel transmitter, no relays, Wi-Fi, 7-36 VDC power input

178020 Two-channel transmitter, no relays, Wi-Fi, 9-36 VDC isolated power input

Part No. Description

Table 1-1. Available Model Configurations (Continued)

Note

Introduction

1.5 Options

Part No Description

162172 Charger, TranSend for 6V SLA battery; Not compatible with HD models

162173 Battery, TranSend for 6V SLA; Not compatible with HD models

162175 Enclosure, TranSend for 6V SLA battery; Not compatible with HD models

162178 Antenna kit, remote standard antenna

139309 Antenna kit, long range Omni with 3 m coax cable

139310 Antenna kit, corner reflector 9 dbi with 3 m coax cable

139311 Antenna kit, corner reflector 12 dbi with 3 m coax cable

139312 Antenna kit, Yagi 15 dbi with 3 m coax cable

144345 30 m coaxial cable, for use with non-vehicle mount antenna kits

139313 Antenna kit, vehicle mount. 5 dbi with 5 m coaxial cable

143880 Pre-wired cordset, 0.5 m, 4-pin male; for use with the MSI-7001 TranSend

162177 Pre-wired cordset, 2 m, 4-pin male; for use with the MSI-7001 TranSend

162184 Field wire-able connector, 4-pin male, 4-6 mm straight; for use with the MSI-7001 TranSend

162185 Field wire-able connector, 4-pin male, 6-8 mm straight; for use with the MSI-7001 TranSend

162186 Field wire-able connector, 4-pin male, 4-6 mm right angle; for use with the MSI-7001 TranSend

162187 Field wire-able connector, 4-pin male, 6-8 mm right angle; for use with single channel transmitters and all receivers

143531 Power cord, 6 V SLA battery charger, EU; Not compatible with HD models

143533 Power cord, 6 V SLA battery charger, Australia; Not compatible with HD models

143534 Power cord, 6 V SLA battery charger, UK; Not compatible with HD models

160109 AC adapter, TranSend 6V; Not compatible with HD models

160110 AC adapter, TranSend 6V US/UK/EU/AUS/China; Not compatible with HD models

150964 RS-232 serial cable, nine-pin female; Not compatible with HD models

150965 RS-232 serial cable, nine-pin male; Not compatible with HD models

145085 RS-232 serial cable, nine-pin unterminated

148624 RS-232/485 cable assembly; M12 to nine-pin female; Only compatible with HD models

164865 Cable, 4 m, one-channel, mV/V output, LC input

165648 Cable, 5 m, one-channel, mV/V output, LC input

165651 Cable, 10 m, one-channel, mV/V output, LC input

145084 Cable, 2 m, one-channel, analog output

144400 Cable, 5 m, one-channel, analog output

168903 Cable, 10 m, one-channel, analog output

Consult Straight connector, analog output, 4-6 mM OD

Consult Straight connector, analog output, 6-8 mM OD

Consult Right angle connector, analog output, 4-6 mM OD

Consult Right angle connector, analog output, 6-8 mM OD

184002 7000HD half-plate mounted, FHSS, DC (battery) powered; Only compatible with 7000HD models

Consult GoDex Dt4X direct thermal printer

Table 1-2. Available Options

MSI TranSend 7000 Series

6 Visit our website www.RiceLake.com

1.6 MSI-7000 Front Panel

Figure 1-1. MSI-7000 Front Panel

Item No. Description

1 Power Input – Located on the side of the unit

2 Setpoint 1-3 Connections – Located on the side of the unit

3 Type of Power Source – Type will be checked

4 Setpoint LEDs

Green – Setpoint is enabled and not tripped

Red – Setpoint is enabled and tripped

Orange – Setpoint configuration error

5 Power Button

6 Power LED – Indicates unit is on when lit

Steady Green – On with good battery (or AC)

Steady Orange – On with low battery

Blinking Red – On with very low battery

7 Serial Port – Located on the top of unit; Pre-set at 9600 baud and 8-N-1

8 Wireless Options – Type is checked

9 Channel LEDs – Indicates which channel is being controlled by the unit

Off – Sensor is disabled

Blinking Orange – RF is disconnected

Steady Orange – Sensor fault (overload/underload/uncal/error/etc.)

Blinking Blue – Sensor is in CoZ and working properly

Steady Blue – Sensor is loaded and working properly

Steady Purple – Sensor Selected (for two seconds)

10 Zero Button – Press to zero the currently selected channel

11 Arrow Buttons – Use to scroll through channels

12 Load Cell Inputs – Located on the side of the unit

13 Output / Input – Type is checked

Table 1-3. MSI-7000 Front Panel Controls

FHSS

Wi-Fi 802.11

802.15.4

Serial

Port

Output

Input

Power

Set Point

2-3

Set Point

1-2

Introduction

1.7 MSI-7001 Front Panel

Figure 1-2. MSI-7001 Front Panel

Item No. Description

1 Output / Input – Type is checked

2 RF Frequency – Type is checked

3 Transmitter Power LED – Indicates state of unit power

Steady short green blinks – Good battery (or AC power)

Two red blinks then a pause – Low battery

Four red blinks then a pause – Very low battery

Steady red – Load cell fault (overload/underload/uncal/error/etc.)

Five green blinks per second – Calibration mode

Receiver Power LED – Indicates state of unit power

Steady short green blinks – RF connected, good battery (or AC power)

Two short red blinks then a pause – RF connected, low battery

Four short red blinks then a pause – RF connected, very low battery

Steady long red blinks – RF disconnected and good battery (or AC power)

Long red blink, short red blink then a pause – RF disconnected and low battery

Long red blink, three short red blinks – RF disconnected and very low battery

NOTE: Older units have a single color red LED and newer units have a dual color red and green LED. Blinking patterns are

consistent for all units.

4 Power Button

Press & release – Turns unit on

Press & hold 1-4 seconds – Will auto zero

Press & hold 5 seconds – Turns unit off

5 Power Input – Located on the side of the unit; Type is checked

6 Serial Port – Located on the side of unit; Pre-set at 9600 baud and 8-N-1

Table 1-4. MSI-7001 Front Panel Controls

Sensor In

Power In

Serial

Port

85~265 VAC

47~63 Hz

7~36 VDC

EXT BATTERY

5~6 VDC

Load Cell In

mV/V Out

802.15.4

WiFi 802.11

FHSS

Measurement Systems

International

A RICE LAKE WEIGHING SYSTEMS COMPANY

MSI-7001

Made in the U.S.A

Blink Rate

1/s = Power OK

2/s = Low

4/s = Very Low

MSI TranSend 7000 Series

8 Visit our website www.RiceLake.com

1.8 MSI-7000HD Front Panel

Figure 1-3. MSI-7000HD Front Panel

Item No. Description

1 Setpoint 1-3 Connections – Located on the side of the unit

2 Power Input – Located on the side of the unit

3 Setpoint LEDs

Green – Setpoint is enabled and not tripped

Red – Setpoint is enabled and tripped

Orange – Setpoint configuration error

4 Power Button

5 Power LED – Indicates unit is on when lit

Steady Green – On with good battery (or AC)

Steady Orange – On with low battery

Blinking Red – On with very low battery

6 Zero Button – Press to zero the currently selected channel

7 Arrow Buttons – Use to scroll through channels

8 Calibration Screw – Used when unit is in NTEP mode

9 Channel LEDs – Indicates which channel is being controlled by the unit

Off – Sensor is disabled

Blinking Orange – RF is disconnected

Steady Orange – Sensor fault (overload/underload/uncal/error/etc.)

Blinking Blue – Sensor is in CoZ and working properly

Steady Blue – Sensor is loaded and working properly

Steady Purple – Sensor Selected (for two seconds for zeroing)

10 Communication Ports – Comm Port 1 is pre-set at 9600 baud and 8-N-1; Comm Port 2 is pre-set at 38400 baud and 8-N-1

11 Load Cell Inputs - Located on the side of the unit

Table 1-5. MSI-7000HD Front Panel Controls

CAL

POWER IN

CHANNEL 1

RELAY 2

RELAY 3

CHANNEL 2

CHANNEL 3

CHANNEL 4

Introduction

1.9 MSI-7001HD Front Panel

Figure 1-4. MSI-7001HD Front Panel

Item No. Description

1 Power In Connection – Located on the side of the unit

2 Power Button

Press & release – Turns unit on

Press & hold 1-4 seconds – Will auto zero

Press & hold 5 seconds – Turns unit off

3 Transmitter Power LED – Indicates state of unit power

Steady short green blinks – Good battery (or AC power)

Two red blinks then a pause – Low battery

Four red blinks then a pause – Very low battery

Steady red – Load cell fault (overload/underload/uncal/error/etc.)

Five green blinks per second – Calibration mode

Receiver Power LED – Indicates state of unit power

Steady short green blinks – RF connected, good battery (or AC power)

Two short red blinks then a pause – RF connected, low battery

Four short red blinks then a pause – RF connected, very low battery

Steady long red blinks – RF disconnected and good battery (or AC power)

Long red blink, short red blink then a pause – RF disconnected and low battery

Long red blink, three short red blinks – RF disconnected and very low battery

4 Communication Ports – Comm Port 1 is pre-set at 9600 baud and 8-N-1; Comm Port 2 is pre-set at 38400 baud and 8-N-1

5 Load Cell Connectors - Located on the side of the unit.

Table 1-6. MSI-7001HD Front Panel Controls

Blink Rate

1/s = Power OK

2/s = Low

4/s = Very Low

Red = LC Fault

5/s Green = Cal

POWER IN

POWER

COMM

PORTS

9600 Baud 8-N-1

CHANNEL

MSI-7001HD

MSI TranSend 7000 Series

10 Visit our website www.RiceLake.com

2.0 Installation

This section describes procedures for connecting load cell and serial communications cables, along with instructions for

mounting the enclosures.

2.1 Unpacking and Assembly

Immediately after unpacking, visually inspect the contents to ensure all components are included and undamaged. If any parts

were damaged in shipment, notify Rice Lake Weighing Systems and the shipper immediately.

2.2 Connect Load Cell Cables

2.2.1 MSI-7001 TranSend

If using the optional pre-wired cable, refer to the load cell wiring guide table for connecting the cable to the load cell.

If using the field wire-able connector refer to Figure 2-1 and Table 2-1 to connect an MSI-7001 TranSend transmitter to a load

cell or j-box.

See Section 1.5 on page 5 for available cable and connector options.

Figure 2-1. Field Wire-able Male Connector

The metal braid shield is connected to the metal shell of the cordset’s connector head. If the MSI-7001 TranSend is

grounded through its mounting screws, this is usually sufficient. In most applications it is not necessary to connect

the shield to the j-box shield terminal. Sometimes noise pickup is improved by connecting the shield inside the j-box.

However, it may make noise pickup worse. Test performance before cutting off the shield at the cable end.

Connector Pin # Wire Color Function

1 Brown +Excitation

2 White -Excitation

3 Blue +Signal

4 Black -Signal

Table 2-1. MSI-7001 TranSend – Load Cell Wiring Guide

Note

Installation

2.2.2 MSI-7000 TranSend and MSI-7000HD

For MSI-7000 TranSend and MSI-7000HD transmitters, feed standard load cell cables through the cord grips and wire to the

terminal strip.

Figure 2-2. Load Cell to Terminal Block Connection

In most applications it is not necessary to connect the shield to the j-box shield terminal. Sometimes noise pickup is

improved by connecting the shield inside the j-box. However, it may make noise pickup worse. Test performance

before cutting off the shield at the cable end.

2.2.3 MSI-7001HD

For MSI-7001HD transmitters, feed standard load cell cables through the cord grips and wire to the terminal strip.

Load Cells 1 and 2 share a common excitation connection in two load cell configurations.

Figure 2-3. MSI-7001HD Load Cell to Terminal Block Connection

Load Cell 1 Load Cell 2 Load Cell 3 Load Cell 4

– Excitation

+ Excitation

– Signal

+ Signal

– Excitation

+ Excitation

– Signal

+ Signal

– Excitation

+ Excitation

– Signal

+ Signal

– Excitation

+ Excitation

– Signal

+ Signal

Note

Load Cell 2

Load Cell 1

– Signal 2

+ Signal 2

– Excitation

+ Excitation

– Signal 1

+ Signal 1

Shield

Shared

MSI TranSend 7000 Series

12 Visit our website www.RiceLake.com

2.3 Connect Power

2.3.1 MSI-7001 TranSend

1. Connect the power source to the MSI-7001 TranSend.

Figure 2-4. Power Input Wiring

2.4 Network Connections

When connecting to a remote device for a network setting, transmitting and receiving units must be set to ensure network and

channel settings match.

The Device ID must be unique to each unit. See Section 3.2.3 on page 21.

2.5 Analog Output Connection

2.5.1 MSI-7001 TranSend Connector

2.5.2 MSI-7000 TranSend Wiring

7001 Power Input Wiring, 7-36VDC Version

+VIN

GND Power Input Cable 6VDC Battery Connector

120VAC Power

Adapter Connector

7001 Power Input Wiring, 5-6VDC Version

Power Input Cable

Note

50.0 mm [1.97"]

Blue: Isolated Ground

Brown: Loop Voltage In (Opt)

White: Voltage Out

7.0 mm [0.28"]

Ø5.3 mm

[0.21"]

Black: Current Out

7.0 mm [0.28"]

Blue: Isolated Ground

Black: Current Out

Brown: Loop Voltage In (Opt)

White: Voltage Out

Installation

2.5.3 PLC Wiring Diagrams

Pin # Wire Color Function Comment

1 Brown Loop Voltage In Optional for increasing compliance. Input range: +16V to 36Vmax

2 Black Current Out Will drive 20mA into 625Ω without external boost voltage. See Table 2-3.

3 White Voltage Output Specified for load resistance ≥1kΩ. Recommended

load resistance: 100kΩ to minimize voltage drop due

to wire resistance in connecting cable.

4 Blue Isolated Ground Connection required for current and voltage output

Table 2-2. Analog Output Wiring

External Loop

Voltage Input

20mA Output Max Rwiring+

Rshunt

24mA Output Max Rwiring+

Rshunt

None 625Ω 520Ω

18V 750Ω 625Ω

24V 1.05kΩ 875Ω

30V 1.35kΩ 1.125kΩ

36V 1.65kΩ 1.375kΩ

Table 2-3. Current Compliance Table

16~36 Vdc

Standard Current Output Wiring

P4-Isolated Gnd

P2-Current Out

P1-Loop Volt In

P3-Voltage Out

PLC

A/D

–

PLC

A/D

–

Voltage Output Wiring

PLC

A/D

–

Shunt

See

Table

250Ω

Typ

Current Output Wiring with a Voltage Loop

P4-Isolated Gnd

P2-Current Out

P1-Loop Volt In

P3-Voltage Out

From

7001

7000 P4-Isolated Gnd

P2-Current Out

P1-Loop Volt In

P3-Voltage Out

From

7001

7000

From

7001

7000

Analog Output connector pin-out is pin

1=LOOPV IN, pin 2=VDAC OUT, pin 3=ISO

GND, and pin 4=IDAC OUT

MSI TranSend 7000 Series

14 Visit our website www.RiceLake.com

2.6 Relays

The MSI-7000 TranSend can be equipped with three Form C Coil relays for process control or safety related systems. The MSI-

7000HD comes standard with three relays.

Relays are installed and wired out to 3 pins on a M12 connector.

Figure 2-5. Relay Wiring Diagram

With normally open wiring, the contact is de-energized when the setpoint is inactive. When the setpoint is tripped, the contact

will close and the relay will energize.

With normally closed wiring, the contact is closed and energized when the setpoint is inactive. When the setpoint is tripped, the

contact will open and the relay will de-energize.

See Section 3.2.6 on page 30 for programming setpoints.

Relay 1 - Common

ACN or B-

ACL or B+

Relay 1 - Normally Open

Relay 1 - Normally Closed

Relay 2 - Common

Relay 2 - Normally Open

Relay 2 - Normally Closed

Relay 3 - Common

Relay 3 - Normally Open

Relay 3 - Normally Closed

Fuse

5A Type

Relay Conﬁguration

(1 of 3)

Installation

2.7 Mounting the Enclosure

The MSI TranSend 7000 Series transmitters and receivers can be mounted either vertically or horizontally to a flat surface.

If mounted inside an enclosure or I-beam, use the correct antenna for the environment and distance. Please call Rice Lake

Weighing Systems, if assistance is needed to select an antenna, or reference the antenna selection guide in the appendix.

Antennas must be placed within line-of-sight for reliable communications.

A standard antenna and coax connector are resistant to water, but not water-proof.

Seal the TNC base with an adhesive heat shrink boot if antenna is exposed to water.

Figure 2-6. Mounting Dimensions – MSI-7001 TranSend

Note

IMPORTANT

8.54"

217.0 mm

8.09"

205.5 mm

Center Distance

3.97"

100.8 mm

3.47"

88.24 mm

4.70"

119.28 mm

0.246"

6.25 mm

1.57"

39.88 mm

Bottom Ø 0.167" (4.24 mm)

Top Ø 0.394" (10.01 mm)

MSI TranSend 7000 Series

16 Visit our website www.RiceLake.com

Figure 2-7. Mounting Dimensions – MSI-7000 TranSend

5.89"

149.50 mm

5.34"

135.64 mm

Center Distance

1.79"

45.49 mm 2.579"

65.51 mm

1.58"

39.88 mm

0.276"

7.01 mm

Bottom Ø 0.177" (4.50 mm)

Top Ø 0.382" (9.70 mm)

1.24"

31.50 mm

Page is loading ...

Rice Lake LaserLight 2 Technical Manual

Brand: Rice Lake

Model: LaserLight 2

Type: Technical Manual

This manual is also suitable for

Download PDF

report

Rice Lake LaserLight 2 Technical Manual

This manual is also suitable for

Rice Lake LaserLight 2 Technical Manual

Related papers

Other documents