2. Computers & electronics
  3. TVs & monitors
  4. Wall & ceiling mounts accessories
  5. ATEN
  6. 2X-051G

ATEN 2X-051G Quick start guide

  • Hello! I have reviewed the Installation Guide for the ATEN DIN Rail Mounting Kit 2X-051G. This document details how to mount an ATEN secure device server onto a DIN rail, both parallel and perpendicular. It includes instructions and diagrams for each mounting method, and provides a list of the included hardware. I'm ready to answer any of your questions about the kit and its installation.
  • What is the purpose of the DIN Rail Mounting Kit?
    What is included in the DIN Rail Mounting Kit?
    How do I mount the device parallel to the DIN rail?
    How do I mount the device perpendicular to the DIN rail?
All information, documentation and specifications contained in this media are subject to change without prior notice by the manufacturer.
Please visit our website to find the most up-to-date version.
DIN Rail Mounting Kit 2X-051G
Installation Guide
MISC10000017 06/2023 V2.0
Package Contents
Qty
Description
1
DIN rail kit containing 2 x DIN rail mount brackets and 4 x DIN rail bracket screws
1
L-shape mounting bracket
2
M3x6 screws
1
user instructions
The DIN Rail Mounting Kit allows you to attach and install an ATEN secure device server onto a DIN rail.
For a list of compatible models, please refer to the Compatible Products section on the 2X-051G product page from
the ATEN website.
Parallel DIN Rail Mount
To mount a secure device server parallel to the DIN rail, refer to the instructions and diagrams below.
1. Using the DIN rail kit, attach the 2 DIN rail mount brackets onto to the device, with the 4 screws enclosed, via its
center screw holes.
2. Secure the device onto the DIN rail.
All information, documentation and specifications contained in this media are subject to change without prior notice by the manufacturer.
Please visit our website to find the most up-to-date version.
Perpendicular DIN Rail Mount
To mount a secure device server perpendicular to the DIN rail, refer to the instructions and diagrams below.
1. Using the 2 M3x6 screws, attach the L-shape mounting bracket onto the device via its center screw holes at the
side opposite to its grounding terminal.
2. Using the DIN rail kit, attach the L-shape mounting bracket to 1 of the DIN rail mount brackets with 2 of the 4
screws enclosed.
3. Secure the device onto the DIN rail.
/